Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
searching the non-recorded spaces) can be performed reliably. Repeated playback DP-R7090/R6090 (En) REMOTE CONTROL UNIT RC-P0601 Preparation OLoad a disc in the CD player. : Keys and control used in the operations described on this page. To repeat only the programmed tracks 1Press so that the “PGM” indicator lights. REMOTE CONTROL UNIT RC-P0601 REMOTE CONTROL UNIT RC-P0601 2Select the disc. 1 2 3 4 5 6 7 8 9 0 +10 3Select the desired track number. REMOTE CONTROL UNIT RC-P0601 4Set the entry. REMOTE CONTROL UNIT RC-P0601 5Repeat steps 2 – 4 above. REMOTE CONTROL UNIT RC-P0601 6Switch REPEAT ON. 7Start playback. REMOTE CONTROL UNIT RC-P0601 DISC SELECTOR 1 2 3 4 5 P.MODE REPEAT P.MODE Go to step 3 within 8 seconds. Go to step 4 within 8 seconds. The current status is displayed when the key is pressed once. When it is pressed while the status is displayed, the repeat ON status can be set to OFF (or vice versa). 6 GP0M1IDCS? OAll of the programmed tracks will be repeated. OIn case only one track is programmed, only that track will be repeated. OUp to 32 tracks can be programmed. When “FULL” is displayed, no more tracks can be programmed. REPEATON To cancel repeated playback Press the REPEAT key twice. (REPEAT ON ® OFF) REMOTE CONTROL UNIT RC-P0601 REPEAT DP-R7090/R6090 (En) To repeat the entire disc This allows repeated playback of all the tracks on the disc loaded in the disc tray. 1Press so that the “PGM” indicator goes off. P.MODE 2Switch REPEAT ON. REPEAT The current status is displayed when the key is pressed once. When it is pressed while the status is dis- played, the repeat ON status can be set to OFF (or vice versa). 3Start playback. 6 REMOTE CONTROL UNIT RC-P0601 REMOTE CONTROL UNIT RC-P0601 REMOTE CONTROL UNIT RC-P0601 PGM1\ 0 01 EREPTAON To cancel repeated playback Press the REPEAT key twice. (REPEAT ON ® OFF) REMOTE CONTROL UNIT RC-P0601 REPEAT Editing DP-R7090/R6090 (En) The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the18 middle at the ends of sides A and B. REMOTE CONTROL UNIT RC-P0601 Preparation OLoad a disc in the CD player. OCheck that the unit is in the normal play TRACK mode. ! : Keys and control used in the operations described on this page. REMOTE CONTROL UNIT RC-P0601 DISC SELECTOR 1 2 3 4 5 Go to step 3 within 8 seconds. Enter the recording time of the tape. 1 1 Light the “EDIT” indicator. Select the disc.2EDIT Do this operation in the stop mode. Go to step 2 within 8 seconds. If more than 8 seconds have elapsed, press the key again. REMOTE CONTROL UNIT RC-P0601 3 When using the numeric keys: When using the TIME DISPLAY key: REMOTE CONTROL UNIT RC-P0601 TIME DISPLAY EDIT 2 Set the entry. 1 Select the time. REMOTE CONTROL UNIT RC-P0601 1 2 3 4 5 6 7 8 9 0 +10 a Blinks. DETIDSI?C Press the numeric keys as shown below. 30-minute tape : 000) 46-minute tape : 00006 EDIT IC3 -6 DSC4 ORecording within 99 minutes can be specified in minutes (2 digits). OIf you commit a mistake in time entry, press the P.MODE key and restart the procedure from the beginning. OBy pressing the TIME DISPLAY key the set time-length intervals will change in this order: "46=54=60=74=90=??" OThe interval length can be adjusted with the skip keys 4 and . in units of one minute (to a maximum of 99 minutes). OAutomatic editing is executed for side A and side B, = DP-R7090/R6090 (En) 19 REMOTE CONTROL UNIT RC-P0601 : Keys and control used in the operations described on this page. To check the edited contents OWhen the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B. DETIA01CHECK REMOTE CONTROL UNIT RC-P0601 Playing or recording the edited contents 6 REMOTE CONTROL UNIT RC-P0601 To clear the edited contents Press any one of these keys. P.MODE CLEAR REMOTE CONTROL UNIT RC-P0601 Do this operation in the stop mode. 0 NoteNote Press the 6 key to start playback according to the edited content. The playback pauses at the beginning of the track edited for tape side B. Press the 6 key again to continue playback. When recording the edited content onto a tape, it is recommended to use the synchro recording or CCRS recording function of KENWOOD cassette decks. ODo not adjust the output level from this unit particularly during recording. OFor details, see the instruction manual of the cassette deck. OThe edited data is cleared entirely. NotesNotes 1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or the last track on side A or side B may be cut short. 2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music. Playback in a random order (Random playback) DP-R7090/R6090 (En) As tracks are selected at random, you can enjoy listening to for a long time. REMOTE CONTROL UNIT RC-P0601 OLoad a disc in the CD player.Preparation 1 1 Check that...
Otros modelos de este manual:estéreo - DP-R6090 (635.94 kb)