Break off the cassette tab If you later want to reuse the tape for recording, cover the broken tab with adhesive tape. Before placing a cassette in the tape deck Take up any slack in the tape. Otherwise, the tape may get entangled in the parts of the tape deck and become damaged. When using a tape longer than 90 minutes The tape is very elastic. Do not change the tape operations such as play, stop, and fast-winding frequently. The tape may get entangled in the tape deck. Cleaning the tape heads Clean the tape heads after every 10 hours of use. Be sure to clean the tape heads before you start an important recording or after playing an old tape. Use a separately sold dry-type or wet-type cleaning cassette. For details, refer to the instructions of the cleaning cassette. Demagnetizing the tape heads Demagnetize the tape heads and the metal parts that have contact with the tape after every 20 to 30 hours of use with a separately sold demagnetizing cassette. For details, refer to the instructions of the demagnetizing cassette. Specifications Main unit AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (The United States model only) CMT-NEZ5 With 6 ohm loads, both channels driven, from 120 – 10,000 Hz; rated 18 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output. CMT-NEZ3 With 6 ohm loads, both channels driven, from 120 – 10,000 Hz; rated 9 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output. Amplifier section CMT-NEZ5 European model: DIN power output (rated): 18 + 18 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 25 + 25W (6 ohms at 1 kHz, 10% THD) Music power output (reference): 38 + 38 W Pan-American model: Continuous RMS power output (reference): 20 + 20 W (6 ohms at 1 kHz, 10% THD) Other models: The following measured at AC 120, 220 or 240 V, 50/60 Hz DIN power output (rated): 14 + 14 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 20 + 20 W (6 ohms at 1 kHz, 10% THD) Inputs AUDIO IN: Sensitivity 250 mV, impedance 47 kilohms Outputs PHONES: Accepts headphones with an impedance of 8 ohms or more SPEAKER: Accepts impedance of 6 to 16 ohms. Additional Information continued 27GB CMT-NEZ3 North-American model: Continuous RMS power output (reference): 10 + 10 W (6 ohms at 1 kHz, 10% THD) European model: DIN power output (rated): 11 + 11 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 15 + 15 W (6 ohms at 1 kHz, 10% THD) Music power output (reference): 28 + 28 W Other models: The following measured at AC 120, 220 or 240 V, 50/60 Hz DIN power output (rated): 11 + 11 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 15 + 15 W (6 ohms at 1 kHz, 10% THD) Inputs AUDIO IN: Outputs PHONES: Sensitivity 250 mV, impedance 47 kilohms Accepts headphones with an impedance of 8 ohms or more SPEAKER: Accepts impedance of 6 to 16 ohms. CD player section Laser Diode Properties Emission duration: continuous Laser Output: Less than 44.6 .W (This output is the value measurement at a distance of 200 mm from the Frequency response objective lens surface on the Optical Pick-up Block with 7 mm aperture) 20 Hz – 20 kHz Tape deck section Recording system 4-track 2-channel, stereo Tuner section AM tuner section Tuning range Pan-American model: 530 – 1,710 kHz (with the tuning interval set at 10 kHz) 531 – 1,710 kHz (with the tuning interval set at 9 kHz) European and Saudi Arabian models: 531 – 1,602 kHz (with the tuning interval set at 9 kHz) Other models: 530 – 1,710 kHz (with the tuning interval set at 10 kHz) 531 – 1,602 kHz (with the tuning interval set at 9 kHz) Antenna AM loop antenna, external antenna terminal Intermediate frequency 450 kHz Speaker CMT-NEZ5 Speaker system 2-way, bass-reflex type Speaker units Woofer: 10 cm dia., cone type Tweeter: 4 cm dia., cone type Nominal impedance 6 ohms Dimensions (w/h/d) Approx. 145 . 235 . 175 mm Mass Approx. 1.9 kg net per speaker CMT-NEZ3 Speaker system Full Range Speaker System Speaker units Woofer: North American model: 8 cm dia., cone type Other models: 10 cm dia., cone type Nominal impedance 6 ohms Dimensions (w/h/d) Approx. 145 . 235 . 155 mm Mass North American model: Approx. 1.4 kg net per speaker Other models: Approx. 1.5 kg net per speaker FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range Antenna Antenna terminals Intermediate frequency 87.5 – 108.0 MHz FM lead antenna 75 ohms unbalanced 10.7 MHz 28GB General Power requirements North American model: AC 120 V, 60 Hz Mexican model: AC 120 V, 60 Hz European model: AC 230 V, 50/60 Hz Australian model: AC 230 – 240 V, 50/60 Hz Korean model: AC 220 V, 60 Hz Chinese model: AC 220 V, 50/60 Hz Taiwanese model: AC 120 V, 50/60 Hz Argentine model AC 220 V, 50/60 Hz Saudi Arabian model: AC 120 – 127, 220, 230 – 240 V, 50/60 Hz Other models: AC 120, 220 or 230 – 240 V, 50/60 Hz Adjustable with voltage...

Otros modelos de este manual:
estéreo - CMT-NEZ5 (395.97 kb)
- ()
- ()