Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 1.33 mb Nombre del archivo: Idioma del manual:

If this occurs, switch off DBB or reduce the volume. Automatic DSC-DBB selection The best DBB setting is generated automatically for each DSC selection. You can manually select the DBB setting that best suits your listening environment. DSC DBB JAZZ off ROCK on (3) TECHNO on (3) OPTIMAL on (2) English 15 CD Operation English 21 3 TUNERTAPE 1/2CD MAXAUXINC.SURR. DSC VEC DBB 1/2/3 REPEAT SLEEP SHUFFLE CD DIRECT VOLUME IMPORTANT! – This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the changer mechanism. – Do not load more than one disc into each tray. Discs for playback This system can playback all digital audio CD, finalised digital audio CD-Recordable (CDR) discs and finalised digital audio CD-Rewritable (CDRW)discs. Loading discs 1 Press OPEN•CLOSE to open the disc tray. 2 Load up to two discs on the individual disc trays. To load the third disc, press DISC CHANGE. . The disc tray will rotate until the empty tray is ready for loading. 2 21 DISC CHANGE DISC 1 DISC 2 DISC 3 OPEN•CLOSE 1 3 Press OPEN•CLOSE to close the disc tray. . "READING" is displayed. The selected disc tray, total number of tracks and the playing time will appear on the display. . A lighted button indicates that a disc is loaded on the disc tray. Notes: – Load the discs with the label side facing up. – To ensure good system performance, wait until the disc tray completely reads the disc(s) before proceeding. 16 CD Operation Playing discs To play all discs on the disc tray . Press EA. . All the available discs will play once, then stop. . During playback, the selected disc tray, track number and elapsed playing time of the current track are displayed. To play the selected disc only . In CD mode, press DISC 1/2/3 (or CD DIRECT 1/2/3 on the remote control). . The selected disc will play once, then stop. To interrupt playback . Press EA. . The current track time flashes. . To resume playback, press EA again. To stop playback . Press C. Selecting a desired track/passage To search for a particular passage during playback . Press and hold a or a and release it when the desired passage is located. . During searching, the volume will be reduced. To select a desired track . Press i or e repeatedly until the desired track is displayed. . If playback is stopped, press EA to star t playback. Note: – In Shuffle mode, pressingiwill cause the player to skip only to the beginning of the current track. To skip to the beginning of the current track during playback . Press i once. Replacing discs during playback 1 Press DISC CHANGE. . The disc tray will open without interrupting current playback. 2 To change the inner disc, press DISC CHANGE again. . "DISC CHANGE" is displayed and the disc will stop playing. . The disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible. Repeat and Shuffle You can select and change the various play modes before or during playback. Repeat play 1 Press REPEAT on the remote control repeatedly to select : . "TRACK" – to repeat playback of the current track. . "DISC" – to repeat playback of the current disc. . "ALL DISC" or "PROGRAM" – to repeat playback of all available discs or programmed tracks. 2 To resume normal playback, press REPEAT until "OFF" is displayed. . REP is shown, except for REPEAT OFF mode. Random play 1 Press SHUFFLE on the remote control. . SHUF is shown and "SHUFFLE" is displayed. . All the available discs or programmed tracks (if programme is active) will be played in random order. 2 To resume normal playback, press SHUFFLE again. . SHUF disappears. Notes: – During programme play or shuffling mode, it is not possible to repeat playback the current disc (Repeat Disc mode). – Pressing the OPEN•CLOSE button will cancel all repeat and shuffling modes. English 17 CD Operation English Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 40 tracks can be stored in the memor y in any order. 1 Load the desired discs on the disc tray (refer to “Loading discs”). 2 Press PROGRAM to star t programming. . PROG star ts flashing. 3 Press CD or DISC 1/2/3 to select a disc. 4 Press i or e repeatedly to select the desired track. 5 Press PROGRAM to store the track. . Repeat steps 3–5 to store other discs and tracks. 6 To end programming, press C once . . PROG stays and the programme mode remains active. . The total number of tracks programmed and the total playing time are displayed. 7 To star t programme play, press EA. . "PLAY PROGRAM" is displayed. Notes: – If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" is displayed instead of the total playing time. – If you attempt to programme more than 40 tracks, "FULL" is displayed. – If you press any of the CD DIRECT 1/2/3 buttons on the remote control, the system will play the selected disc or track,...

Descargar ahora

Introduzca dos números de la imagen: