Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Placement .................................................................................... mount the unit on a wall. Mount on a wall To wall mount the unit, see the included separate sheet of wall mounting instructions. Prepare the remote control Caution . Risk of explosion! Keep batteries away from .......................................................................................................... ...................................... 1 Remove the protective tab to activate the remote control batter y. To replace the remote control battery: 1 Open the batter y compar tment. 2 Inser t 1 CR2025 batter y with correct polarity (+/-) as indicated. 3 Close the batter y compar tment. Note . Before pressing any function button on the ..................................U ........................................................ with the remote control instead of the main unit. . If you are not going to use the remote control for a long time, remove the battery. Connect power Caution . Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the unit. . Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. . Before connecting the AC adaptor, ensure youhave completed all other connections. English EN 9 Note . The type plate is located on the bottom of the main unit. 1 Connect one end of the AC adaptor to the DC IN socket on the bottom of the main unit. 2 Connect the other end of the AC adaptor to the wall outlet. Auto install radio stations When you connect power and no radio stations are stored, the unit automatically begins to store radio stations. 1 Connect the unit to the power supply. » [AUTO INSTALL - PRESS PLAY] (auto install - press the PLAY button) is displayed. 2 Press on the main unit to star t installation. » [AUTO] (auto) is displayed. 10 EN » The unit automatically stores radio .............................................................................. » When all the available radio stations .................................................................................. is broadcast automatically. Set clock 1 In the standby mode, press CLOCK SET to enter the clock setting mode. 2 Press / repeatedly to select 12 hour or 24 hour format. 3 Press CLOCK SET...................... » The hour digits are displayed and begin to blink. 4 Press / to set the hour. 5 Press CLOCK SET.................... » The minute digits are displayed and begin to blink. 6 Press / to set the minute. 7 Press CLOCK SET........................................ setting. Turn on 1 Press . » The unit switches to the last selected source. Switch to standby 1 Press again to switch the unit to standby mode. » The clock (if set) appears on the display panel. To switch the unit to Eco Power Standby mode: 1 In the standby mode, press and hold for more than 2 seconds. » The backlight on the display panel turns off. Tip . To display clock after the unit switched to eco power standby mode, press again. 4 Play Play disc 1 Press CD to select the disc source. 2 Press OPEN/CLOSE to open the disc compar tment. 3 Inser t a disc with the printed side facing outward, then press OPEN/CLOSE to close the disc compar tment. 4 If the disc doesn’t play, press . .. To pause/resume play, press . .. To stop play, press . .. To select another track, press / or press a numeric button. .. To select an album, press ALBUM +/-. .. To search within a track, press and hold / , then release to resume normal play. Play from USB or SD/MMC Note . Ensure that the USB device contains playable audio contents for suppor ted formats. (see ‘USB playability information’ on page 15) 1 Inser t the USB plug of the device into the socket, or the SD/MMC card into the SD/MMC socket. 2 Press USB/SD to select the USB source, or the SD source. 3 Press ALBUM +/- to select a folder. 4 Press / .............................................. 5 If the disc doesn’t play, press . .. To pause/resume play, press . .. To stop play, press . .. ........................................................................ and hold / , then release to resume normal play. Play from an external device You can also listen to an external audio device through this unit. 1 Press MP3 LINK to select the MP3 link source. 2 Connect the supplied MP3 link cable to: .. the MP3 LINK jack (3.5mm) on the unit. .. the headphone jack on an external device. 3 Star t to play the device (see the device user manual). 5 Play options Repeat play 1 During play, press REPEAT repeatedly to select: .. [REP] (repeat): the current track is played repeatedly. .. [REP ALL] (repeat all): all tracks...