Votos - , Puntuación media:
(
)
)
Fabricar: Philips
Tamaño del archivo: 308.02 kb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
4 Repeat the above steps to program other stations. Tip • To over write a programmed station, store another station in its place. Select a preset radio station 1 In tuner mode, press / to select a preset number. • You can also press the numeric buttons to select a preset number directly. Tip • Position the antenna as far as possible from T V, VCR or other radiation source. • For optimal reception, fully ex tend and adjust the position of the antenna. FM stations with RDS Radio Data System (RDS) is a ser vice that sends additional broadcast information along with FM stations. If you listen to a FM station with RDS signal, “RDS” is displayed. Display RDS information 1 For an FM station with RDS, press RDS/DISPLAY repeatedly to display various broadcast information. 14 EN 6 Play options Pause/resume play 1 During play, press to pause/resume play. Skip to a track For CD: 1 Press / to select another track. • To select a track directly, you can also press a key on the numerical keypad. 2 Press to select an album or a folder. 3 Press / to select a track or a file. Search within a track 1 During play, press and hold / . 2 Release to resume normal play. Select repeat/shuffle play options 1 During play, press REPEAT/SHUFFLE repeatedly to select a repeat option or the shuffle play mode. • [ ]: the current track is played repeatedly. • [ ]: all tracks are played repeatedly. • [ ]: all tracks in this album are played repeatedly. • [ ]: all tracks are played randomly. 2 To resume normal play, press REPEAT/SHUFFLE repeatedly until no option is displayed. Program tracks Note • You can program tracks only when the play stops. You can program a maximum of 40 tracks. 1 Press PROG/CLOCK SET to activate the program mode. » [PROG] (program) is displayed. 2 For MP3/WMA tracks, press / to select an album. 3 Press / to select a track, then press PROG/CLOCK SET to confirm. 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks. » During play, [ PROG] (program) is displayed. • To erase the program, in the stop position, press . Display time 1 Press DISPLAY to display time. Tip • In Eco Standby mode, time is displayed for 90 seconds. Adjust volume level 1 During play, press VOL +/-to increase/ decrease the volume level. English EN 15 Mute sound 1 During play, press to mute/unmute sound. Select a preset sound effect 1 During play, press DSC repeatedly to select: • [POP] (pop) • [JAZZ] ( jazz) • [ROCK] (rock) • [CLASSIC] (classic) • [FLAT] (flat) Enhance bass 1 During play, press DBB to turn on or off dynamic bass enhancement. » If DBB is activated, [DBB] is displayed. 16 EN English 7 Other features Set the alarm timer This unit can be used as an alarm clock. The disc/radio/USB is activated to play at a preset time. Note • Ensure that you have set the clock correctly. 1 Press to switch to standby mode. 2 Press and hold SLEEP/TIMER for more than two seconds. » A prompt to select the source is displayed. 3 Press CD, TUNER , USB to select a source. 4 Press SLEEP/TIMER to confirm. » The clock digits are displayed. » The hour digits begin to blink. 5 Press / to set the hour. 6 Press SLEEP/TIMER to confirm. » The minute digits begin to blink. 7 Press / to set the minute. » The timer is set and activated. » is displayed. Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 When the unit is turned on, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). »When sleep timer is activated, is displayed. 2 Press SLEEP/TIMER repeatedly until [OFF] (off ) is displayed. » When sleep timer is deactivated, disappears on the display. Play from an external device You can also listen to an external audio device through this unit. 1 Press MP3 LINK to select the MP3 link source. 2 Connect the supplied MP3 link cable to: • the MP3 LINK jack (3.5mm) on the unit. • the headphone jack on an ex ternal device. 3 Star t to play the device (see the device user manual). EN 17 8 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Total output power 2 x 10 W RMS Frequency response 80 Hz - 16 kHz, ± 3 dB Signal to noise ratio > 60 dB MP3 link input 0.5 V RMS 20 k Disc Laser type Semiconductor Disc diameter 12 cm /8 cm Suppor t disc CD-DA , CD-R , CD RW, MP3-CD, WMACD Audio DAC 24 Bits / 44.1 kHz Total harmonic distor tion < 1.5% Frequency 60 Hz -16 kHz response (44.1 kHz) Signal to noise ratio > 55 dBA Tuner Tuning range FM: 87.5 - 108 MHz Tuning grid 50 KHz Number of presets 20 USB Direct Version 2.0/1.1 General information AC power 100-240V~, 50/60HZ Operation Power 15 W Consumption Standby Power Consumption 1 W Eco Power Standby Power 0.8 W Consumption Dimensions 565 x 245 x - Main Unit ( W x H x D) 104 mm Weight - Main Unit 2.7 kg USB playability information Compatible USB devices: • USB flash memor y (USB 2.0 or USB 1.1) • USB flash players (USB 2.0 or USB 1.1) • memor y cards (requires an additional card reader t...