Iniciar sesión:
Votos - 0, Puntuación media: 0 ( )

Manual de usuario Philips, modelo MCM2150/12

Fabricar: Philips
Tamaño del archivo: 817.51 kb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


For MP3 disc and USB: 1 Press / to select an album or a folder. 2 Press / to select a track or a file. Program tracks You can program a maximum of 20 tracks. 1 Press PROG to activate the program mode. 2 For MP3 tracks, press / to select an album. 3 Press / to select a track, and then press PROG to confirm. 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks. » During play, [PROG] (program) is displayed. • To erase the program, in the stop position, press . EN 5 Listen to the radio Tune to a radio station Tip • Position the antenna as far as possible from TV,VCR, or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna. 1 Press FM repeatedly to select FM source. 2 Press and hold / for more than two seconds. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. To tune to a weak station: Press / repeatedly until you find optimal reception. Program radio stations automatically Note • You can program a maximum of 20 preset radio stations (FM). In tuner mode, press and hold PROG for more than two seconds to activate automatic programming. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically. Program radio stations manually 1 Tune to a radio station. 2 Press PROG, and then press / to select a number from 1–20. 3 Press PROG to confirm. » The preset number and the frequency of the preset station are displayed. 4 Repeat steps 2-3 to program more stations. Note • To overwrite a programmed station, store another station in its place. Select a preset radio station In tuner mode, press / to select a preset number. EN 6 Other features Set the alarm timer This unit can be used as an alarm clock.You can select CD, FM, or USB as alarm source. Note • Make sure that you have set the clock correctly. 1 In standby mode, press and hold SLEEP/ TIMER for more than two seconds. » The hour digits are displayed and begin to blink. 2 Press / repeatedly to set hour, and then press SLEEP/TIMER. » The minute digits are displayed and begin to blink. 3 Repeat step 2 to set minute, select a source (CD, FM, or USB), and adjust volume. Note • If no button is pressed in 90 seconds, the system exits timer setting mode automatically. To activate or deactivate the alarm timer: Press SLEEP/TIMER repeatedly to activate or deactivate the alarm. » If timer is activated, is displayed. Tip • If CD/USB source is selected, but no disc is placed or no USB connected, the system switches to the tuner source automatically. Set the sleep timer To set the sleep timer, in turn on mode, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). » When sleep timer is activated, is displayed. Otherwise, disappears. Listen to an external device You can listen to an external device through this unit with an MP3 link cable (not supplied). 1 Press AUDIO IN repeatedly to select AUDIO IN source. 2 Connect an MP3 link cable (not supplied) between: • AUDIO IN jack (3.5 mm) on the unit, • and the headphone jack on an external device. 3 Star t to play the device (see the device user manual). SOURCE AUDIO IN VOLUMEAUDIO IN EN 11 7 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Maximum Output Power 70 W Frequency Response 60 Hz - 16 kHZ; ±3 dB Signal to Noise Ratio .70 dB Total Harmonic Distor tion <1% Aux Input 600 mV RMS Speakers Speaker Impedance 8 ohm Speaker Driver 3.5" + 20 mm Sensitivity >84 dB/m/W Tuner (FM) Tuning Range 87.5-108 MHz Tuning grid 50 KHz Sensitivity <22 dBu - Mono, 26dB S/N Ratio <45 dBu - Stereo, 46dB S/N Ratio Search Selectivity <30 dBu Total Harmonic Distor tion <3% Signal to Noise Ratio >45 dB USB USB Direct Version 2.0 full speed USB 5 V Power .500 mA Disc Laser Type Semiconductor Disc Diameter 12 cm/8 cm Suppor t Disc CD-DA, CD-R, CD RW, MP3-CD Audio DAC 24 Bits/44.1 kHz Total Harmonic <1% (1 kHz) Distor tion Frequency Response 60 Hz - 16 kHZ; ±3 dB S/N Ratio >70 dBA General information AC power 100-240 V, 50/60 Hz Operation Power 100 W Consumption Eco Standby Power <0.5 W Consumption Dimensions -Main Unit (W x H x D) 180 x 121 x 239 mm - Speaker Box (W x H x D) 140 x 260 x 185 mm Weight -Main Unit 1.6 kg - Speaker Box 2 x 2.1 kg EN USB playability information Compatible USB devices: • USB flash memor y (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.1) • memor y cards (requires an additional card reader to work with this unit) Supported formats: • USB or memor y file format: FAT12, FAT16, FAT32 (sector size: 512 bytes) • MP3 bit rate (data rate): 32-320 Kbps and variable bit rate • Director y nesting up to a maximum of 8 levels • Number of albums/ folders: maximum 99 • Number of tracks/titles: maximum 999 • ID3 tag v2.0 or later • File name in Unicode UTF8 (maximum length: 32 bytes) Unsupported formats: • Empty albums: an empty alb...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría