Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
&. Play tracks in current album repeatedly. &. Play tracks randomly. o MENU/ & Access iPod/iPhone/iPad menu. & Stop play or erase a program. p DOCK & Select iPod/iPhone/iPad source. q OK &. [ ' r / & Select a preset radio station. & Skip to previous/next album. s FM &. Select FM tuner source. 3 Get started Caution . Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in $' Placement ] ( mount the unit on a wall. Mount on a wall See the wall mounting instructions included in the package. Connect FM antenna Tip . For optimal reception, fully extend and adjust the position of the antenna. Connect the supplied FM antenna to the FM ANT socket on the main unit. EN 9 Prepare the remote control Caution . Risk of explosion! Keep batteries away from heat, ' = ! ' . Risk of decreased batter y life! Never mix different brands or types of batteries. . Risk of product damage! When the remote control is not used for long periods, remove the batteries. To install the remote control battery: 1 Open the batter y compar tment. 2 Inser t 2 AAA batteries with correct ; )q<{+ ' 3 Close the batter y compar tment. abc Connect power Caution . Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. . Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. . Before connecting the AC adapter, ensure that you have completed all other connections. Note & The type plate is located at the back of the main unit. Connect the power adapter to: & the DC IN socket on the main unit. & the wall socket. Store FM radio stations automatically When the unit turns to FM tuner mode, and no radio stations are stored, the unit begins to store FM radio stations automatically. 1 Connect the unit to the power supply. » [AUTO INSTALL - PRESS PLAY, STOP CANCEL] (to auto install, press ; to cancel, press + ;' 10 EN 2 Press and hold for 3 seconds to star t full scan. » The unit automatically stores FM radio # * * ! station. Tip & To exit storing mode, press or . Set clock 1 In standby mode, press and hold CLOCK SET on the remote control for two seconds. » [SET CLOCK] ) + the display. 2 Press CLOCK SET again. » The 12/24 hour format blinks. 3 Press / repeatedly to select hour format. 4 Press CLOCK SET ' » The hour digits blink. 5 Repeat steps 3-4 to set the hour. 6 Repeat steps 3-4 to set the minute. 7 Repeat steps 3-4 to select whether to synchronize time of this unit with RDS stations. &. [RDS TIME SYNC [N] ]: time synchronization is deactivated. &. [RDS TIME SYNC [Y] ]: the unit synchronizes time from the RDS stations automatically. Note . The accuracy of the transmitted time depends on the RDS station that transmits the time signal. . If no button is pressed in 90 seconds, the unit exits clock setting mode automatically. Turn on Press . » The unit switches to the last selected source. Note . To select a source, press SOURCE repeatedly or the source selection buttons on the remote control. Switch to standby mode Press again to switch the unit to standby mode. » ) + ; panel. English EN 11 4 Play Play disc 1 Press to open the disc compar tment. 2 Inser t a disc with the printed side facing up. 3 Press to close the disc compar tment. 4 Press CD on the remote control to select the disc source. » [Reading] )*+ ! moment, then CD star ts playing automatically. If not, press . Play from USB Note . Make sure that the USB device contains playable audio content. 1 Inser t the USB device into the socket. 2 Press USB on the remote control to select the USB source. » Play star ts automatically. If not, press . Play from iPod/iPhone/iPad You can enjoy audio from iPod/iPhone/iPad through this unit. Compatible iPod/iPhone/iPad The unit suppor ts the following iPod, iPhone and iPad models: Made for. &. iPod touch (1st, 2nd, 3rd, and 4th * + &. iPod nano (2nd, 3rd, 4th, 5th, and 6th * + &. iPhone 4 &. iPhone 3GS &. iPhone 3G &. iPhone & iPad 2 & iPad Load the iPod/iPhone 1 Push DOCK for iPod/iPhone/iPad to open the dock compar tment. 2 Place the iPod/iPhone into the dock. Load the iPad For iPad or iPad 2, you can use the supplied rubber pad to keep it stable. 12 EN 1 Push DOCK for iPod/iPhone/iPad to open the dock compar tment. 2 Place the rubber pad into the dock compar tment as indicated. 3 Place an iPad or iPad 2 into the dock. Listen to the iPod/iPhone/iPad 1 Make sure that the iPod/iPhone/iPad is loaded correctly. 2 Press SOURCE repeatedly or DOCK on the remote control to select iPod/iPhone/ iPad source. 3 Play tracks in the iPod/iPhone/iPad. &. To pause/resume play, press . &. To skip to a track, press / . &. To search during play, press and hold / , then release to resume normal play. &. To go back to the previous iPod/ iPhone/iPad menu, ...