Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Select a preset sound effect 1 During play, press DSC repeatedly to select: • [POP] (pop) • [ JAZZ] (jazz) • [CL ASSIC] (classic) • [ROCK] (rock) Enhance bass 1 During play, press DBB to turn on or off dynamic bass enhancement. » If DBB is activated, DBB is displayed. Mute sound 1 During play, press to mute/unmute sound. • To pause recording, press . To 8 Record resume, press this button again. Note • To record, use only “Normal” (IEC type I) tapes on which the write-protect notches (tabs) are not broken. Tip • When you play or record a tape, the sound source cannot be changed. • The best recording level is set automatically. Change of volume and sound effect does not affect recording. Note • The quality of recorded sound can differ depending on the source and the tape used. Record from CD to tape 1 Press CD to select disc source. 2 Load a disc. 3 Open the tape button cover. 4 Press to open the tape door. 5 Load a tape. 6 Press to star t recording. » Disc play star ts automatically from the beginning of the disc. • To pause/resume recording, press . • To stop recording, press . Record a section of a disc to tape 1 During disc play, press and hold / to search, then release the button. • To select a track, press / . 2 Press to pause disc play. 3 Press to star t recording. » Disc play resumes automatically. • To stop recording, press . Record from radio to tape 1 Tune to the desired radio station. 2 Open the tape button cover. 3 Press to open the tape door. 4 Load a tape. 5 Press to star t recording. • To pause recording, press . To resume, press this button again. • To stop recording, press . Record from USB 1 Press USB/MP3 LINK repeatedly to select USB source. 2 Connect a USB device. 3 Open the tape button cover. 4 Press to open the tape door. 5 Load a tape. 6 Star t play the USB device and then press to star t recording. • To pause/resume recording, press . • To stop recording, press . Record from external audio devices 1 Press USB/MP3 LINK repeatedly to select ex ternal audio source. 2 Connect an ex ternal audio device. 3 Open the tape button cover. 4 Press to open the tape door. 5 Load a tape. 6 Star t play the device and then press to star t recording. • To pause/resume recording, press . • To stop recording, press . English 9 Use more of your Micro System Set the sleep timer This unit can switch to standby automatically after a preset period of time. 1 When the unit is turned on, press SLEEP/ TIMER repeatedly to select a set period of time (in minutes). » When sleep timer is activated, the display shows . To deactivate sleep timer 1 Press SLEEP/TIMER repeatedly until “SLP OFF” is displayed. » When sleep timer is deactivated, disappears on the display. Set the alarm timer This unit can be used as an alarm clock.The DISC,TUNER or USB is activated to play at a preset time. 1 Ensure that you have set the clock correctly. 2 In standby mode, press and hold SLEEP/ TIMER for more than 2 seconds. 3 Press CD, TUNER or USB/MP3 LINK to select a source. 4 Press SLEEP/TIMER to confirm. » The hour digits are displayed and begin to blink. 5 Press VOL +/- to set the hour. 6 Press SLEEP/TIMER to confirm. » The minute digits are displayed and begin to blink. 7 Press VOL +/- to set the minute. 8 Press SLEEP/TIMER to confirm. » The timer is set and activated. Activate and deactivate the alarm timer 1 In standby mode, press SLEEP/TIMER repeatedly to activate or deactivate the timer. » If the timer is activated, the display shows . » If the timer is deactivated, disappears on the display. Note • If disc/USB device source is selected and the track cannot be played, tuner is activated automatically. Listen through headphone 1 Plug a headphone into the socket on the unit. 10 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2X5W RMS Frequency Response 60 - 16kHz, ±3dB Signal to Noise Ratio >62dB Disc Laser Type Semiconductor Disc Diameter 12cm/8cm Suppor t Disc CD-DA, CD-R , CD-RW, MP3-CD, WMA-CD Audio DAC 24Bits / 44.1kHz Total Harmonic <1% Distor tion Frequency Response 60Hz -16kHz S/N Ratio >62dBA Tuner Tuning Range FM: 87.5 - 108MHz; MW: 531 - 1602kHz Tuning grid 50 kHz (FM); 9 kHz (MW ) Total Harmonic <3% Distor tion Signal to Noise >50 dB Ratio Tape deck Frequency response125 - 8000 • Normal tape (type I) Hz (8 dB) Signal-to-noise ratio40 dBA • Normal tape (type I) Wow and flutter <0.4% JIS Speakers Speaker Impedance 4ohm General information-Specs Power supply Model: GFP181T1512- 1 or GFP181DA-1512-1, Input: AC100-240V~, 50/60Hz, 0.35A Output: DC15V, 1.2 A Operation Power 26 W Consumption Standby Power <4 W Consumption Dimensions • Main Unit ( W x H 152 x 228 x 222mm x D) • Speaker Box (W x 146 x 232 x 140mm H x D) Weight • With Packing 6.6 kg • Main Unit 1.95 kg • Speaker Box 2 x 1.2 kg English Supported MP3 disc formats • ISO9660, Joliet • Maximum title number: 512 (depending on file name length) • Maximum album number: 255 • Suppor ted s...