Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
12/8/00, 1:57 PM Manual programming 1 Press TUNER (BAND) . 2 Press TUNER (BAND) again to select the desired waveband : FM, MW or LW. 3 Press PROG for less than one second. ™ The PROGRAM starts flashing. ™ The next available preset number will be displayed for selection. 4 Press a or a to tune to the desired frequency. • If you wish to store the radio station to another preset number, press 4 or 3 to select the desired preset number. 5 Press PROG again. ™ The PROGRAM disappears and the radio station will be stored. • Repeat steps 3– 5to store other preset radio stations. Notes: – When 40 radio stations are stored and you attempt to store another radio station, the display will show " FULL” . If you want to change an existing preset number, repeat steps 3 – 5. – You can cancel manual programming by pressingC(on the system only). – During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. 3139 115 20071 TUNER TUNER Tuning to Preset Radio Stations Receiving RDS Radio Station C • Press 4 or 3 to select the desired preset number. ™ The preset number, radio frequency, and waveband appear on the display. RDS (Radio Data System) is a broadcasting service that allows FM stations to send additional information along with the regular FM radio signal. This additional information can contain: • STATION NAME: The radio station name is displayed. • PROGRAM TYPE: The following program types exist and can be received by your tuner: News, Affairs, Info, Sport, Educate, Drama, Culture, Science, Varied, Pop M, Rock M, M.O.R. (middle of the road music), Light M, Classics, Other M, No type. • RADIO TEXT (RT): text messages appear in the display. When you have tuned to a RDS station, the RDS logo ( C) and the radio station name will appear on the display: • The display normally shows the radio station name if available. By repeatedly pressing RDS button you can change the type of display information: ™ The display shows in turn: STATION NAME ™ PROGRAM TYPE ™ RADIO TEXT ™ TUNED FREQUENCY ™ STATION NAME ... Note: – When you press the RDS button and the display shows " NO RDS", it indicates that either the tuned station is not transmitting RDS signal or it is a non RDS station. RDS Clock Some RDS station may be transmitting a real clock time at an interval of every minute. Setting the time with RDS clock 1 Press CLOCK/TIMER. ™ " --:-- " or current time appears on the display. 2 Press CLOCK/TIMER once more to enter clock setting mode. ™ " 00:00" or current time starts flashing. 3 Press RDS. ™ The message " SEARCH RDS TIME" will be displayed. ™ If the station does not transmit RDS clock, " NO RDS TIME" will be displayed. ™ When the RDS clock is read, " RDS TIME" will be displayed. The current clock time is displayed for 2 seconds and will be stored automatically. ™ If within 90 seconds, the RDS time is not detected, " NO RDS TIME" will be displayed. Note: – Some RDS station may be transmitting a real time clock at a minute interval. The accuracy of the transmitted time depends on the transmitting RDS station. NEWS/TA (Traffic Announcement) (only available in Radio Station with RDS) You can activate NEWS or TA function in Standby, Demonstration or any source mode except Tuner mode. Once the News Program Type (for NEWS function) or Traffic Announcement data (for TA function) is detected in any of the selected RDS stations, it will switch to TUNER mode automatically. NEWS/TA key toggles in the following sequence : NEWS ™ TA ™ OFF ™ NEWS To start NEWS or TA function 1 Press NEWS/TA to select NEWS function. ™ The NEWS and " NEWS" will be displayed. • If you want to select TA function, press NEWS/TA again. ™ The TA and " TA" will be displayed. English 17 3139 115 20071 FWM55-22-GB-ENG-V01 17 12/8/00, 1:57 PM TUNER 2 When NEWS or TA is selected; • It will scan stations stored in the first 5 preset and wait for the News Program Type / Traffic Announcement data to be available in any of these RDS stations. During the search : ™ The current source activity will remain uninterrupted. – During News bulletin or Traffic Announcement, you can press any available source or Tuner function keys to cancel NEWS/TA function and execute the relevant source mode. – If set is switched to Tuner source, the NEWS/TA function will be cancelled, " NEWS OFF" or " TA OFF" will be TAPE DUB(HSD) REC MINI HIFI SYSTEM FRONT 60Hz 500Hz250Hz 1KHz 2KHz 4KHz 8KHz INCREDIBLE SURROUND DYNAMIC BASS BOOST TAPE PROG CLOCK/ TIMER TUNER AUX PRESET STOP• CLEARSEARCH • TUNING PLAY PAUSE PREV NEXT CD1 • 2 • 3 CDR/VIDEOBAND TAPE 1 • 2 DIGITAL SOUND CONTROL A. REV STANDBY ON SIDE SOUND NAVIGATION MP3• CD ALBUM MP3-CD+ TITLE + CD NEWS/TA RDS VOLUME English ™ If no RDS station is found in the first displayed immediately after the 5 presets, the NEWS/TA function will " TUNER" message. be switched off. The display will show " NO RDS NEWS" or " NO RDS TA" and NEWS or TA will disappear from the display. • When NEWS/TA transmission is det...