Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
It can damage the parts of this unit or be the cause of personal injury. • Do not hang onto the installed unit and avoid any impact to the unit. • Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product. • When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it may cause it to fall. Detach the unit from the bracket as shown below. , Note Getting Started 11 Manually pairing wireless subwoofer Setting up When the connection failed, you can see the red LED on the subwoofer and cannot get sound from the subwoofer. To solve this problem, follow the Pairing wireless subwoofer steps below. 1 LED indicator of wireless subwoofer LED Color Status Yellow The wireless subwoofer is receiving the signal of the unit. Yellow (blink) The wireless subwoofer is trying to connect. Red The Wireless subwoofer is in standby mode. Off (No display) The power cord of wireless subwoofer is disconnected. Setting up the wireless subwoofer for the first time 1. Connect the power cord of the Wireless subwoofer to the outlet. 2. Turn on the main unit : The main unit and wireless subwoofer will be automatically connected. 1. Press and hold Ion the unit and MUTE on the remote control simultaneously. -“REMATE” appears on the display window. 2. Press PAIRING on back of the woofer. -The Yellow LED will flicker. 3. Turn off and on the unit. - If you see the yellow LED, it’ s successful. 4. If you don’t see the yellow LED, try again Step 1 - Step 3. Note , • If you operate main unit then wireless subwoofer sound within a few seconds in standby mode. • Set the distance between this unit and wireless subwoofer within 10 m (32 ft.). • Optimum performance can be implemented only when the unit and the Wireless subwoofer within distance of 2 m (6 ft.) to 10 m (32 ft.) is used since communication failure may occur if longer distance is used. • It takes a few seconds (and may take longer) for the unit and subwoofer to communicate with each other. Getting Started 12 Connecting Optional equipment connection PORT. (Portable) IN connection Connecting 2 MP3 player, etc... Listening to music from your portable player The unit can be used to play the music from many types of portable player or external devices. 1. Connect the portable player to the PORT. (Portable) IN connector of the unit. 2. Turn the power on by pressing 1. 3. Select the PORTABLE function by pressing FUNCTION. 4. Turn on the portable player or external device and start playing it. OPTICAL In connection Connect optical output of external devices to the OPTICAL IN 1 or OPTICAL IN 2 connector. To the digital optical output jack of external device Speaker ez (easy) setup Listens to sound from TV, DVD or Digital Device with 2.1 or 2ch mode. 1. Connect the OPTICAL 1 or OPTICAL 2 jack on the back of the unit to optical out jack of your TV (or digital device etc.) 2. Select the input source to OPTICAL 1 or OPTICAL 2 directly by pressing OPTICAL. 3. Listen to sound with 2.1 or 2ch speaker. 4. Press OPTICAL repeatedly to exit from OPTICAL. Function is retuned to previous one. , Tip This unit turns on and selects OPTICAL function directly even in power-off state. Press OPTICAL on the remote control. Connecting 13 USB connection Compatible USB devices Insert USB memory device to the USB port on the • MP3 Player : Flash type MP3 player. unit. • USB Flash Drive : Devices that support USB1.1. • The USB function of this unit does not support some USB devices. USB device requirement • Devices which require additional program installation connected to a computer, are not 2 Connecting Removing the USB Device from the unit. 1. Choose a different function mode or press Z on the remote control or I on the unit twice in a row. 2. Remove the USB device from the unit. Playable file MP3/WMA file requirement MP3/ WMA file compatibility with this unit is limited as follows : • Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz ( WMA) • Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps ( WMA) • Maximum files : Under 999 • File extensions : “.mp3”/ “.wma” • A protected file by DRM(Digital rights management) cannot be played on the unit. supported. • Do not extract the USB device while in operation. • For a large capacity USB, it may take longer than a few minutes to be searched. • To prevent data loss, back up all data. • This unit is not supported when the total number of files is 1000 or more. • The unit’s USB Port cannot be connected to PC. The unit can not be used as a storage device. • The exFAT file system is not supported on this unit. • Depending on some devices, it may not available to recognize the followings on this unit. -External HDD -Card readers -Locked devices -Hard type USB devices -USB hub -Using USB extension cable The resume point may be cleared when you pull out the power cord or removing the USB device from the unit. , 14 Operating 3 Oper...
Otros modelos de este manual:estéreo - NB3531A (884.06 kb)