Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Tracks with jpg, wav or doc only are not audio files and therefore will be skipped. Kevin01.mp3 TITLE 01(E) CD-ROM drive Kevin02.mp3 Kevin03.mp3 Kevin04.mp3 Kevin.jpg Life.doc Skipped TITLE 02 Summer05.mp3 Summer06.mp3 Garden.mp3 Garden.mp3 TITLE 04 TITLE 03 Michael07.mp3 Michael08.mp3 Water.mp3 Water.mp3 TITLE 05 Skipped Kenny01.wav Kenny02.wav Butterfly.mp3 TITLE 06 Piano14.mp3 John15.mp3 TITLE 07 Repeating One or All Tracks on the Compact Discs ENG ENG You can repeat indefinitely: A specific track on a compact disc. All tracks on the compact disc selected. All discs loaded in the carrousel 1 To repeat.. . Press CD REPEAT on the Remote control once or more times until... The current track indefinitely REPEAT 1 is displayed, and the ”1” always flashes. The selected disc REPEAT 1 is displayed All discs loaded REPEAT ALL is displayed When you wish to stop the Repeat function, press CD REPEAT until ALL or 1 is displayed, or press 2 POWER TIMER MO/ST DEMO DIMMER REC/PAUSE TAPE 1/2 MP3-CD/CD TAPE P.BASS SLEEP SHUFFLE CD REPEAT ON/OFF TIMER/CLOCK PROGRAM/SET DISC SKIPOPEN/CLOSE 1,2 2 Function to skip through 10 tracks at a time Press the +10 button briefly while playing back a CD and MP3/WMA-CD . The track 10 tracks after the current one will then be played back. Example: If you want to select track 43 during playback of track 5, press the button four times, and then press the 5 . 10 . . 42 . 43 When MP3/WMA-CD CD player has been stopped or turned off, this function allows playback from the start of the track that you last listened to. being played . The selected. Last Memory Function (This function is only available during playback of MP3/WMA-CD.) Programming the Order of CD Play-back You can decide: The order in which you listen to the tracks on the discs loaded Which tracks you do not wish to listen to You can program up to 24 tracks. You must stop the compact disc player before selecting the tracks. This feature can be combined with the Repeat function. 1 If the CD function is selected, stop the player by pressing . 2 Load the selected CDs. 3 Press ENTER/PRGM. . Result: The following indications are displayed: (01 = Program no., PR1 = Disc no., – – = Track no. on the disc) 4 If necessary, select the disc containing the required track by pressing the corresponding DISC (1, 2, 3) button. Select the required track by turning the MULTI JOG knob: To the left to move back through the tracks To the right to move forward through the tracks 5 6 Press ENTER/PRGM. to confirm your selection. Result: The selection is stored and is displayed. 7 To select other tracks, repeat Steps 4 to 6. 8 Press MP3-CD/CD ( ) to listen to the track selection in the order programmed. 9 To... Turn the MULTI JOG knob... Listen to the current track again One notch to the left Listen to the previous track Two notches to the left Listen to the next track One notch to the right Skip forwards or backwards one The appropriate number of or more tracks notches to the right or to the left 10 To cancel the selection, press . Once if the compact disc player is stopped If you open the compartment, the selection is cancelled. If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track. You can also use the / buttons to select the required tracks in step 5, 9. STANDBY/ON OPEN/CLOSE PLAYBACKFULL LOGIC CONTROL1REC/PLAY CD SYNCHRO RECORDING 2 TUNER FM CD/ MP3-CD TAPE AUX ENTER/PRGPE1/2 MONO/ST SLEEP MEMOR REC/PAUSE 1,10 4 8 5,95,9 5,9 3,6 ENG You can check or change your selection of tracks at any time. Press once if you have started listening to the selection. Press ENTER/PRGM. . Result: The following indications are displayed: (CH = Check, 01=Program No, CH1 = Disc No, – – = Track No on the disc) If you have already programmed 24 tracks, CH is displayed instead of PR when you press ENTER/PRGM. . Press ENTER/PRGM. once or more times until the track to be changed is displayed. If necessary, press the corresponding Disc (1, 2, 3) button to change discs. Press and or turn MULTI JOG to select a different track. Press ENTER/PRGM. to confirm your change. Press MP3/CD-CD ( ) to start listening to the selection. Result: The first track selected is played. 1 2 3 4 5 6 7 SLE 5 Checking or Changing Programmed CD Tracks 5 4 You can check or change your selection of tracks at any time. Press once if you have started listening to the selection. Press ENTER/PRGM. . Result: The following indications are displayed: (CH = Check, 01=Program No, CH1 = Disc No, – – = Track No on the disc) If you have already programmed 24 tracks, CH is displayed instead of PR when you press ENTER/PRGM. . Press ENTER/PRGM. once or more times until the track to be changed is displayed. If necessary, press the corresponding Disc (1, 2, 3) button to change discs. Press and or turn MULTI JOG to select a different track. Press ENTER/PRGM. to confirm your change. Press MP3/CD-CD ( ) to start listening to the select...