Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
* For details on the limitations for digital recording, see page 52. **This signal is converted because these systems do not use digital signals. Note on MD track numbers On an MD, the track number (track sequence), track start and end point information, etc., are recorded in the TOC* area independent of the sound information. You can edit recorded tracks quickly by modifying the TOC information. * TOC: Table Of Contents. After recording /Press MD ¤ to remove the MD or press POWER to turn off the system power. The MD recording is complete only after the recording information is entered to TOC, and “TOC” is lit or is flashing. Note The MD recording is complete only after all the recording information is entered to TOC at which point TOC stops flashing and goes out. Be careful disconnect the mains lead or move the deck before this point. Before disconnecting the mains lead, do the following: – Remove the MD. – Press POWER, to turn off the system. Protecting a recorded MD • To protect a recorded MD, slide the tab on the side of the MD to open the slot. In this position, the MD cannot be recorded on. To record on the MD, slide the tab to close the slot. Slide open the tab Tab • If the MD is record protected, “MD Protected” appears in the display and the MD cannot be recorded on. Slide the tab to closed position reinsert the MD and try again. Recording the favorite CD tracks on an MD You can select your favorite CD tracks with the Programme Play feature, then record the programme on an MD using the CD Synchro Recording feature. MD indicator 6 MD § 8 MD . 2 711 3 4 Step 1: Selecting the tracks 1 Press FUNCTION repeatedly until “CD” appears, then place a CD on the disc tray. 2 Press PLAY MODE repeatedly until “PGM” appears. 3 Press CD +or =repeatedly until the desired track number appears. CD CD 7 Selected track number LEVEL SYNC - PGM DBFB 4m09s The playing time 4 Press ENTER/YES. The track is programmed. The number of the programmed track appears, followed by the total playing time of the programme. “Step” appears, followed by the total number of programmed tracks. CD CD 7 The number of the last programmed track LEVEL SYNC - PGM DBFB 4m09s The total number of the programmed tracks 5 To program additional tracks, repeat steps 3 and 4. Step 2: Recording on an MD 6 Insert a recordable MD. If the MD indicator is lit red, another MD is already inserted, press MD ¤and remove the MD. 7 Press CD-MD SYNC. The MD deck stands by for recording and the CD is in pause for playback. If you use an MD with tracks already recorded on it, the MD deck automatically locates the end of the recorded portion and starts the new recording from there. continued Recording the favorite CD tracks on an MD (continued) 8 Press MD a.. Recording starts from the last recorded portion of the MD. The CD player stops and the MD deck pauses automatically when the recording is completed. If there is no remaining recording time on the MD, the MD deck stops. To stop recording Press MD .. If the MD ends while recording, the MD and the CD automatically stops. Tip The MD is labeled with the disc title of the CD (see page 22) when using a new recordable MD or an MD whose tracks have been completely erased (see page 39) (Disc Memo Copy function). While “TOC” is lit or is flashing To ensure complete recording, do not move the deck or pull out the mains lead . The deck updates the Table of Contents (TOC) while “TOC” is flashing. Notes • The MD recording is complete only after all the recording information is entered to TOC at which point TOC stops flashing and goes out. Be careful disconnect the mains lead or move the deck before this point. Before disconnecting the mains lead, do the following: – Remove the MD. – Press POWER, to turn off the system. • If the MD is record protected, “MD Protected” appears in the display and the MD cannot be recorded on. Press MD ¤and remove the MD, slide the record protection tab to the closed position (see page 28), reinsert the MD and try again. Recording on an MD manually The system automatically locates the end of any recorded portion of an MD and starts recording from that point. MD indicator 1MD § 4 MD . 32 DISPLAY 1 Insert a recordable MD. If the MD indicator is lit red, another MD is already inserted, press MD ¤ and remove the MD. 2 Press FUNCTION to select the source (e. g., CD) you want to record. • CD : Recording from the CD. • TUNER : Recording from the radio. • TAPE : Recording from other components. 3 Press rREC. The MD deck is now ready for recording. 4 Press MD a.. Recording starts. 5 Start playing the source you want to record. When recording from this system’s CD player, the track numbers are automatically marked. Press rREC while recording to the mark track numbers. (see “Marking track numbers” page 33). To stop recording Press MD .. If “Level Over” appears in the level meter A high-level signal was input during recording in the tape function. When the sound distorted reduce the recording level (see page 54)...