Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Only one track REPEAT repeatedly until “REPEAT 1” appears in the display while playing the track you want to repeat. Playing the CD tracks in random order –– Shuffle Play You can play all the tracks on one CD or all CDs in random order. (Power) 12 DISC 1~3 3 Jog dial 1 Press FUNCTION repeatedly until “CD” appears in the display, then place a CD. 2 Press PLAY MODE repeatedly until “1 DISC SHUFFLE ” or “ALL DISCS SHUFFLE” appears in the display. “ALL DISCS” shuffles all the CDs in the player. “1 DISC” shuffles the CD whose DISC indicator is green. 3 Press CD (P. “J” appears and then all the tracks play in random order. To cancel Shuffle Play Press PLAY MODE repeatedly until “SHUFFLE” or “PROGRAM” disappears from the display. The tracks continue playing in their original order. To select a desired CD Press DISC 1~3. Tips • You can start Shuffle Play during normal play by pressing PLAY MODE repeatedly to select “SHUFFLE”. • To skip a track, turn the jog dial clockwise (or press +on the remote). Programming the CD tracks –– Program Play You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. (Power) 1 37 p 2 45 A . CD ( p =+ CHECK CLEAR VOL +/– 1Press FUNCTION repeatedly until “CD” appears in the display, then place a CD. 2Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 3Press one of the DISC 1~3 buttons to select a CD. 4Turn the jog dial until the desired track appears in the display. Disc number Total playing time (including selected track) SHUFFLE REPEAT1 ALL 1 DISCS PROGRAM STEP VOLUME SYNC § Track number 5Press ENTER/NEXT. The track is programmed. The program step number appears, followed by the total playing time. 6To program additional tracks, repeat steps 3 to 5. Skip step 3 to select tracks from the same disc. 7Press CD (P. All the tracks play in the order you selected. continued Programming the CD tracks (continued) To cancel Program Play Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. To Press Check the CHECK on the remote program repeatedly. After the last track, “CHECK END” appears. Clear a track from CLEAR on the remote in the end stop mode. Clear a specific CHECK on the remote track repeatedly until the number of the track to be erased lights up, then press CLEAR. Add a track to the 1 Select the disc tray with a program DISC 1~3 button. 2 Select the track by turning the jog dial. 3 Press ENTER/NEXT. Clear the entire ponce in stop mode or program twice while playing. Tips • The program you made remains in the CD player even after it has been played back. Press CD (P to play the same program again. • If “--.--” appears instead of the total playing time during programming, this means: – you have programmed a track number which exceeds 20. – the total playing time has exceeded 100 minutes. Playing CDs without interruption –– Non-Stop Play You can play CDs without pausing between tracks. (Power) 12 3 1 Press FUNCTION repeatedly until “CD” appears in the display, then place a CD. 2 Press NON-STOP to light the indicator. “NON-STOP PLAY” appears in the display. 3 Press CD (P. To cancel Non-Stop Play Press NON-STOP so that the indicator goes out and “NON-STOP OFF” appears in the display. The Tape Deck The Tape Deck Recording on a tape manually You can record from CD, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. The recording level is adjusted automatically. (Power) 2 3 p DOLBY NR 4 15 1 Insert a blank tape into deck B. 2 Press FUNCTION repeatedly until the source you want to record (e.g., CD) appears. 3 Press rREC. Deck B stands by for recording. The indicator on TAPE B ((for front side) lights up. 4 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 5 Press PPAUSE. Recording starts. 6 Start playing the source to be recorded. To Press Stop recording p. Pause recording PPAUSE. Tips • If you want to record from the reverse side, press TAPE B 9to light its indicator after pressing r REC. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing rREC. • When recording from a CD, you can use the jog dial to select tracks during rec pause mode (after pressing rREC in step 3 and before pressing P PAUSE in step 5). Recording a CD by specifying track order — Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. (Power) 2 4 112 p 11,EDIT 3 56 110 8 A . CHECK 1 Place a CD and insert a blank tape into deck B. 2 Press FUNCTION repeatedly until “CD” appears in the display. 3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 4 Press one of the DISC 1~3 buttons to select a CD. 5 Turn the jog dial until the desired track appears in the display. Total playing time Disc number (i...
Otros modelos de este manual:estéreo - MHC-GRX5 (942.15 kb)
estéreo - MHC-GRX7 (942.15 kb)
estéreo - MHC-GRX9000 (942.15 kb)
estéreo - MHC-R500 (942.15 kb)