Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Center surround speaker Rear surround speaker60 to 90 cm (2 to 3 feet) Insert only the stripped portion. Black (O) Red (O) 1 Note The type of speakers supplied vary according to the model you purchased (see “Specifications” on page 53). Rear surround speaker (Right) Rear surround speaker (Left) 2 6 5 4 1 2 321 3 Center surround speaker 1 Front speaker (Right) 2Connect the rear surround speakers. Connect the speaker cords from the rear surround speakers to the appropriate REAR SURROUND SPEAKER jacks. Connect the solid cords to the red jacks and connect the striped cords to the black jacks. Keep the speaker cords away from the antennas to prevent noise. Insert only the stripped portion. Front speaker (Left) Notes • Do not place the rear surround speakers on top of a TV. This may cause distortion of the colors in the TV screen. • Be sure to connect both left and right rear surround speakers. Otherwise, the sound will not be heard. continued Stripe (O) Solid (O) R L + – Step 2: Setting up your speakers (continued) 3 Connect the center surround speaker. Connect the speaker cords fron the center surround speaker to the appropriate CENTER SURROUND SPEAKER jacks. Connect the solid cord to the red jacks and connect the striped cord to the black jacks. Keep the speaker cords away from the antennas to prevent noise. Insert only the stripped portion. 6 Deactivate the demo mode by pressing DEMO when the system power is turned off. The demo mode is also deactivated when you set the time. Tip You can reinforce the bass sound by connecting an optional super woofer to the super woofer connector. Adjusting the speaker volume Solid (O) R L+ + – To enjoy Dolby Pro Logic Surround sound, turn the Dolby Pro Logic mode on, then adjust the volume of each speaker using the test tone that the system provides. (Power) 1 Stripe (O) 4 Set VOLTAGE SELECTOR to position of your local power line voltage (for models with a voltage selector). VOLTAGE SELECTOR 220V120V 230 240V- 5 Connect the power cord to a wall outlet. Demo mode appears in the display. )0 P Pa p += p a a» a» A . A. 1 3 2, 4 1 Press PRO LOGIC (or PRO LOGIC ON/OFF on the remote). “PRO LOGIC ON” appears. 2 Press T.TONE ON/OFF on the remote. The test tone is heard from the speakers in the following order. Adjust the volume of the test tone. Front (left) bCenter bFront (right) V Rear B 3 From your listening position, press CENTER LEVEL (+/–) and REAR LEVEL (+/–) on the remote to adjust the volume. The volume levels from each speaker must become the same. 4 Press T.TONE ON/OFF when you are done adjusting. The test tone turns off. Tip If you turn VOLUME (or press VOLUME +/– on the remote) all the speaker volumes change. Note The test tone feature works only for Dolby Pro Logic Surround sound. Step 3: Setting the time You must set the time before using the timer functions. The clock is on a 24-hour system for the European and Russian models, and a 12-hour system for other models. The 12-hour system model is used for illustration purposes. 1 2,4 3,5 1 Press CLOCK/TIMER SET. The hour indication flashes. 2 Turn the jog dial to set the hour. continued Step 3: Setting the time (continued) 3 Press ENTER/NEXT. The minute indication flashes. 4 Turn the jog dial to set the minute. 5 Press ENTER/NEXT. The clock starts working. Tips • If you’ve made a mistake, start over from step 1. • Setting the time deactivates the demo mode. If you want to display the demo mode, press DEMO when the power is off. Note The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following: 1 Press CLOCK/TIMER SET. 2 Turn the jog dial to select SET CLOCK. 3 Press ENTER/NEXT. 4 Perform steps 2 through 5 above. Step 4: Presetting radio stations You can preset the following number of stations: – 2 band model: 20 for FM, 10 for AM. – 3 band model: 20 for FM, 10 for MW, and 10 for SW (or LW, depending on the model you purchased). – 4 band model: 20 for FM, 10 for MW, 10 for LW, and 5 for UKV. (Power) 4 513 2 1 Press TUNER/BAND repeatedly 3 Press TUNER MEMORY. until the band you want appears in A preset number appears in the display. the display. Preset number The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can ALL DISCS kHz MHz VOLUME ALL DISCS § receive. Every time you press this button, the band changes as follows: 2 band model: 4 Turn the jog dial to select the preset FM .AM 3 band model: FM nMW nSW number you want. n 5 Press ENTER/NEXT. The station is stored. or FM nMW nLW n 6 Repeat steps 1 to 5 to store other stations. 4 band model: FM nMW nLW nUKV* n To tune in a station with a weak * “STEREO PLUS” is displayed when you select UKV. 2 Press and hold + or – until the frequency indication starts to change, then release. Scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear. MONO TUNED STEREO VOLUME signal Press + or – repeatedly in step 2 to tu...
Otros modelos de este manual:estéreo - MHC-RX110AV (1.01 mb)