Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Listening to the radio –– Preset Tuning Preset radio stations in the tuner's memory first (see “Step 3: Presetting radio stations”). (Power) 21 STEREO/MONO VOLUME 1 Press TUNER/BAND repeatedly until the band you want appears in the display. The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive. Every time you press the button, the band changes as follows: 2 band model: FM .AM 3 band model: FM nMW nSW n or FM nMW nLW n 4 band model: FM nMW nLW nUKV* n * “STEREO PLUS” is displayed when you select UKV. 2 Turn the jog dial (or press =or +on the remote) to tune in the desired preset station. Basic Operations + = for lower preset preset numbers. TUNER/BAND numbers. Preset number Frequency =+ VOLUME MHz kHzALL DISCS § To Do this Turn off the radio Press . Adjust the volume Turn VOLUME (or press VOL +/– on the remote). VOLUME +/– continued 15 Turn counterclockwise Turn clockwise )0P+=p aa»a».a )0P+=p A (or press + (or press = on the remote) for higher on the remote) Listening to the radio (continued) To listen to non-preset radio stations Use manual or automatic tuning in step 2. For manual tuning, press + or – repeatedly. For automatic tuning, press and hold + or –. Tips • Pressing TUNER/BAND when the power is off automatically turns the power on and tunes to the last received station (One Touch Play). • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • When an FM program is noisy, press STEREO/MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect. • To improve broadcast reception, reorient the supplied antennas. Recording from the radio You can record the radio program on a tape by calling up a preset station. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. (Power) 2 146 p 35 DOLBY NR 1 Press TUNER/BAND to select the band you want. 2 Turn the jog dial to tune in a preset station. Turn counter- + = Turn clockwise clockwise for for higher lower preset preset numbers. numbers. Preset number Frequency VOLUME MHz kHzALL DISCS § 3 Press ¤and insert a blank tape into deck B. With the side you want to record facing forward 4 Press rREC. Deck B stands by for recording. 5 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 6 Press PPAUSE. Recording starts. To stop recording Press p. Tips • If you want to record from the reverse side, press TAPE B 9to light its indicator after pressing r REC. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • To record non-preset stations, use + and – in step 2 to tune in the desired station manually. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing rREC. • If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Playing a tape You can use any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal) , since the deck automatically detects the tape type. You can also use the jog dial’s AMS* functions to quickly search for songs you want to hear. To select either deck A or B, press DECK A (or DECK B (on the remote. (Power) 3 p =+P PAUSE Basic Operations VOLUME 0) DOLBY NR 112 )0P+=p aa»a».a )0P+=p A DECK A »· DECK B »· =+ p P 0) VOLUME +/– continued Playing a tape (continued) 1 Press ¤and insert a recorded tape in deck A or B. With the side you want to play facing forward 2 Press DIRECTION repeatedly to select Ato play one side. Select §* to play both sides. To play both decks in succession, select RELAY (relay play).** 3 Press TAPE A (or TAPE B) ( (DECK A (or DECK B) (on the remote). Press TAPE A (or TAPE B) 9to play the reverse side. (Press DECK A (or DECK B) (again on the remote to play the reverse side.) The tape starts playing. * The deck stops automatically after repeating the sequence five times. ** Relay play always follows the following sequence: Deck A (front side), Deck A (reverse side), Deck B (front side), Deck B (reverse side). To Do this Stop play Press p. Pause Press PPAUSE. Press again to resume play. Fast-forward Press 0or ). Rewind Press 0or ). Remove the cassette Press ¤. Adjust the volume Turn VOLUME (or press VOL +/– on the remote). Tips • Pressing TAPE A (or TAPE B) (or 9when the power is off automatically turns the power on and starts tape playback if there is a tape in the deck (One Touch Play). • You can switch from another source to the tape deck just by pressing TAPE A (or TAPE B) (or 9(Automatic Source Selection). • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears. • When dubbing tapes originally recorded with Dolby NR, the dubbed tape...
Otros modelos de este manual:estéreo - DHC-MD500 (588.88 kb)