Votos - 4, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
1 Start playing a source. 2 Press BEAT JAM repeatedly to select the jam mode you desire. The button’s indicator lights up. Every time you press the button, the display changes as follows: nPAD MODE µ RANDOM MODE µ GUIDANCE MODE µ JAM OFF PAD MODE This mode emphasizes the rhythm of the source by playing the sound stored at PAD A in sync with the bass and playing the sound stored at PAD B in sync with the treble. RANDOM MODE This mode emphasizes the rhythm of the source by playing random sounds (from the drum pad library) in sync with source. GUIDANCE MODE In this mode, you can join the music. Tap PAD A when the indicator around PAD A lights up (in sync with bass) and tap PAD B when the indicator around PAD B lights up (in sync with treble). You get a point if you tap correctly, or you lose your point if you tap uncorrectly. The number of beats and the points are shown in the display. This mode can be canceled when BEAT JAM is pressed or after several seconds of silence, or the play of the current track is finished. Note BEAT JAM cannot be used at the same time as the BEAT (BEAT ON) function. When BEAT JAM is turned ON, BEAT turns OFF automatically. Likewise, when the BEAT is turned ON, BEAT JAM turns OFF automatically. Using the AUTO BPM function This function automatically synchronizes the rhythm of the current beat pattern with the sound source. 1 Start playing a source. 2 Select a beat pattern. (See “To change the beat pattern” on page 28.) 3 Press BEAT ON/OFF to stop the beat function. 4 Press AUTO BPM. The button’s indicator blinks orange while measuring the source’s BPM. Once measured, the indicator lights green. 5 Listen to the sound source and press BEAT ON/OFF at the downbeat. The rhythm of the beat pattern starts in sync with the source. Tip If the rhythm of the beat pattern does not match the source, press ENTER/NEXT in time with the downbeat of the source. Notes • AUTO BPM may not work with certain songs (such as those with varying tempos). In such cases, the AUTO BPM indicator continues blinking orange. • The amount of time required to measure a song’s BPM (after pressing AUTO BPM) varies for each song. • When there is no sound for several seconds, "BPM NG" is displayed and the AUTO BPM indicator blinks orange. It will, however, resume automatically when the music begins again. • AUTO BPM stops automatically when you turn the jog dial while holding BEAT SPEED (or press SPEED ?or /on the remote). continued Using the beat functions (continued) Using the BEAT MIX function With the BEAT MIX function, you can add a rhythm pattern to one of the preset rhythm patterns. This function lets you store your own rhythm pattern. BEAT BEAT (Power) ON/OFF SELECT BEAT PAD A PAD B MIX 1 Start playing the source. 2 Select the beat pattern for the basic pattern. (See “To change the beat pattern” on page 28.) 3 Select the drum sound you want to add. (See “To change the drum sound” on page 27.) 4 Press BEAT MIX. The selected beat pattern begins, and the BEAT ON/OFF indicator blinks in time with the rhythm. 5 Tap drum PAD A or B at the point you want to add the rhythm. The rhythms you add are repeated every 2 bars. 6 Press BEAT MIX or BEAT ON/OFF. The beat pattern is stored as the MIXED BEAT. To erase the added rhythms Select “MUTE” for the drum sound and tap the pad at the point you want to erase the sound. To reset the MIXED BEAT Press BEAT ON/OFF while holding BEAT MIX. The MIXED BEAT you made is reset to the factory setting. Repeat this procedure from step 1 to make a new MIXED BEAT. Tips • You can change the drum sound during the operation. However, you cannot change the basic beat pattern. • When you make another beat pattern, you can use the MIXED BEAT as the basic beat pattern. Notes • When adding drum sounds to the selected pattern, you can add as many different drum sounds as you like within the pattern. However, you can only program up to two sounds at the same point in the pattern. When two drum sounds are already programmed at the same point in the pattern and a third drum sound is added, the oldest sound programmed at that location is replaced by the new drum sound. • The beat stored as the MIXED BEAT is erased and returns to the factory setting when you disconnect the power cord or if a power failure occurs. Sound Adjustment Sound Adjustment For the most suitable bass sound Adjusting the sound (SYNC BASS) You can reinforce the bass, create a more powerful sound, and listen with headphones. FILE (Power) SELECT GROOVE SYNC BASS EFFECTDBFB To reinforce bass (DBFB) Press DBFB*. Every time you press the button, the display changes as follows: nDBFB NORMAL ( µ DBFB HIGH ( µ DBFB OFF (off) ) ) * DBFB = Dynamic Bass Feedback Press SYNC BASS. The bass frequencies of the music you are listening to are measured and those areas with heavy bass tones are effectively reinforced. The indicator SYNC BASS H or SYNC BASS L lights up according to the areas with heavy bass tones. Press SYNC BASS again to return to the prev...
Otros modelos de este manual:estéreo - MHC-GRX80J (787.91 kb)
estéreo - MHC-R880 (787.91 kb)
estéreo - MHC-RXD8 (787.91 kb)
estéreo - MHC-RXD8S (787.91 kb)