Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. This system is equipped with the Dolby* B-type noise reduction system. * Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Table of Contents Getting Started Step 1: Hooking up the system ................ 4 Step 2: Setting the time ............................ 8 The CD Player Playing a CD ............................................. 9 Playing CD tracks in random order — Shuffle Play ................................. 10 Programming CD tracks — Programme Play .......................... 11 Playing CD tracks repeatedly — Repeat Play .................................. 12 Using the CD display .............................. 13 Labelling a CD — Disc Memo .................................. 14 Checking Disc Memo information .......... 16 The Tape Deck Recording a CD on a tape — CD-TAPE Synchro Recording .... 17 Playing a tape .......................................... 18 Recording your favourite CD tracks on a tape — CD-TAPE Synchro Recording .... 20 Recording your favourite portions on a tape — Manual Recording ....................... 21 Recording from the radio — Manual Recording ....................... 22 Tuner Presetting radio stations .......................... 24 Listening to the radio — Preset Tuning ............................... 25 Labelling the preset stations — Station Name ............................... 27 Using the Radio Data System (RDS)* .... 28 Timer/Other Features Falling asleep to music — Sleep Timer ................................. 29 Waking up to music — Daily Timer ................................. 30 Timer recording radio programmes ........ 31 Adjusting the sound ................................ 33 Optional Components Connecting audio components ................ 34 Connecting external aerials ..................... 36 Additional Information Precautions .............................................. 37 Troubleshooting ...................................... 39 Messages ................................................. 41 Specifications .......................................... 42 Index .......................................... Back cover * European model only Getting Started Getting Started Step 1: Hooking up the system Perform the following procedure 1 to 6 to hook up your system using the supplied cords and accessories. Note Be sure to hook up the system with the mains lead unplugged from the mains. Hooking up the system with the mains lead plugged in may cause the system to malfunction. AM loop aerial Right speaker CMT-SP55TC rear panel FM aerial Left speaker Tuner Amplifier CD player Tape deck Preparation Stack the components vertically in the order shown in the illustration below. Tuner Amplifier CD player Tape deck 1 Connect the system cables to the SYSTEM CONTROL connectors on Connect the tuner and CD player Connect the supplied system cable to the SYSTEM CONTROL 2 (black) connectors on the tuner and on the CD player. Connect the tuner and tape deck Connect the supplied system cable to the SYSTEM CONTROL 3 (red) connectors on the tuner and on the tape deck. Notes • The system cable is used to send signals and electricity between the components for interlinked operation. Be sure to insert the connector horizontally until it clicks into place. Otherwise the system will not operate correctly. • Keep the system cable away from the aerials to prevent noise or malfunction. 2 Connect the speakers. Connect the speaker cords to the SPEAKER terminals on the amplifier and to the terminals on the speakers as shown below. Getting Started each component. Connect the tuner and amplifier Connect the system cable on the amplifier to the SYSTEM CONTROL 1 (white) Red line (3) connector on the tuner. SYSTEM CONTROL 1 SYSTEM CONTROL 1 – R + L + – Clear (#) Insert this portion continued Step 1: Hooking up the system (continued) The supplied speakers can be used as either the left or right speakers. Place the speaker connected to the SPEAKER R terminals on the right side, and the speaker connected to the SPEAKER L terminals on the left side of the system. L (left) R (right) Notes • Keep the speaker cords away from the aerials to prevent noise. • Be sure to connect both left and right speakers. Otherwise, no sound will be produced. 3 Connect the AM aerial. Set up the AM loop aerial, then connect it. AM AM loop aerial 4 Connect the FM aerial. Extend the FM aerial horizontally. Jack type A Jack type B 5 For models with a voltage selector, set the VOLTAGE SELECTOR on the rear of the amplifier to the position of your local mains voltage. 220V-240V 110V-120V VOLTAGE SELECTOR 6 Connect the mains lead to the mains. Arranging the components side by side Once you have finished the connections, you can rearrange the components as desired. Inserting two R6 (size AA) batteries into the remote Adjusting the contrast of the characters in the display All information for each component ap...