Votos - 5, Puntuación media: 4.2
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
“Undo?” does not appear, when there is no editing function that can be canceled. 3 Press ENTER/YES. One of the following messages appears, depending on the last edit. Editing done Message Labeling a track or an MD Copying a disc or “Name Undo?” track title Erasing labeled titles Erasing a single track Erasing all tracks “Erase Undo?” Erasing a portion of a track Moving a track “Move Undo?” Dividing a track “Divide Undo?” Combining tracks “Combine Undo?” 4 Press ENTER/YES again. “Complete!” appears for a few seconds and the contents of the MD are restored to the condition before the edit. To cancel Undo function Press MENU/NO. Changing the recorded level after recording — S.F Edit Function You can change the volume of recorded tracks using S.F (Scale Factor) Edit. The original track is recorded over at the new recording level. When changing the recording level, you can select Fade- in Recording to gradually increase the signal level at the start of recording, or Fade-out Recording to gradually decrease the signal level at the end of the recording. 2 4,5, 6,8,9 3 4,5, 4,5, 6,7 6,7 1 Changing the overall recording level 1 Press FUNCTION repeatedly to switch the function to MD. 2 Press PLAY MODE repeatedly until both “SHUFFLE” and “PROGRAM” disappear. 3 Press MENU/NO to display “Edit Menu”. 4 Press – or + repeatedly until “S.F Edit?” appears, then press ENTER/YES. 5 Press – or + repeatedly until “Tr Level?” appears, then press ENTER/YES. 6 Press – or + repeatedly until the track number you want to change the recording level appears, then press ENTER/YES. “Level 0dB” appears in the display. continued The MD Deck — Editing Changing the recorded level after recording (continued) 7 Press – or + repeatedly to change the recorded level. The recording level can be changed from –12 dB to +12 dB, in 2 dB increments. While monitoring the sound, change to the optimum level while making sure that “OVER” does not appear in the display at the loudest portion. Adjust the level so that “OVER” does not appear 8 Press ENTER/YES. “S.F Edit OK?” appears in the display. 9 Press ENTER/YES. The deck starts recording over the existing track. “S.F Edit: ** %” appears while the track is being recorded. An amount of time that is roughly equal to or longer than the playback time of the track is required when recording over the track. When the recording finishes, “Complete!” appears in the display for a few seconds. Fade-in and Fade-out Recording 1 Press FUNCTION repeatedly to switch the function to MD. 2 Press PLAY MODE repeatedly until both “SHUFFLE” and “PROGRAM” disappear. 3 Press MENU/NO to display “Edit Menu”. 4 Press – or + repeatedly until “S.F Edit?” appears, then press ENTER/YES. 5 Press – or + repeatedly until “Fade In?” or “Fade Out?” appears, then press ENTER/YES. 6 Press . or > repeatedly until the track number you want to change the recording level appears, then press ENTER/YES. “Time 5.0s” appears in the display. 7 Press – or + repeatedly to change the Fade-in or Fade-out recording time. The system plays the portion that will be recorded over using Fade-in or Fade-out Recording. You can set the time at any value between 1.0 second and 15.0 seconds, in 0.1 second increments. You cannot set the time longer than the track. 8 Press ENTER/YES. “S.F Edit OK?” appears in the display. 9 Press ENTER/YES. The deck starts recording over the existing track. “S.F Edit: ** %” appears while the track is being recorded. When the recording finishes, “Complete!” appears in the display for a few seconds. To cancel the operation Press MENU/NO in steps 4 to 8. If you press ENTER/YES in step 9 and recording starts, you cannot interrupt the operation. Notes • You cannot change the recorded level of a track recorded in LP2 or LP4 mode. • Do not disconnect the power cord or move the system while recording is in progress. This may damage the recording data preventing recording from being performed properly. • Do not use an MD that is damaged or dirty. This may prevent recording data from being recorded properly. • Repeatedly changing the recording level results in poor sound quality. • The recording level will not return to the exact original level once the recording level has been changed even if it returned to the original level. • The recording level cannot be changed while the timer is activated. • You cannot undo the S.F Edit Function even if you use the Undo Function. The MD Deck — Editing Sound Adjustment Sound Adjustment Reinforcing the bass sound — DBFB You can listen to music with stronger bass tones or a more powerful sound. DBFB , Press DBFB*. “DBFB” appears in the display. Press again to cancel DBFB. * DBFB: Dynamic Bass Feedback Tip DBFB is factory set to on. Selecting the Preset Equalizer menu The Preset Equalizer enables you to select the sound characteristic among 5 sound effects according to the type of music you are listening to. PRESET EQ , Press PRESET EQ repeatedly. Each time you press the button, the display changes as follows...