Votos - 6, Puntuación media: 3.8
(
)
)
|
Fotos y especificaciones Sony CHC-CL5MD |
Resumen del manual
Do not pull out the mains lead before updating the TOC (while “TOC” is lit) or while updating the TOC (while “TOC” or “STANDBY” is flashing) to ensure a complete editing. Labelling an MD —Name Function You can create titles for your recorded MDs and tracks as follows. During recording If “CD-TEXT” lights up or flashes during recording, you can record the CD TEXT information onto the MD as follows: However, the CD TEXT information is not recorded when recording a CD on an MD and a tape at the same time. • Automatically during recording If you record on an unrecorded or completely erased (see “Erasing all tracks” on page 27) MD when “CD-TEXT” is lit, the CD TEXT information is automatically recorded. • Manually during recording When “CD-TEXT” flashes, press NAME EDIT/CHARACTER on the remote, and then press ENTER/YES on the remote to record the title of the current track. Note Depending on the disc, the CD TEXT information may not be recorded automatically. After recording Use Name Function on this page. You can input a total of approximately 1700 characters for the disc title and track titles on a single MD. 1 Press FUNCTION repeatedly to switch the function to MD. To label a track, turn ./> (or press . or > on the remote) until the desired track number appears. 2 Press NAME EDIT/CHARACTER on the remote. The cursor starts flashing. 3 Press NAME EDIT/CHARACTER on the remote to select the desired type of character. Each time you press the button, the display changes cyclically as follows: (Blank space) t A (Upper cases) t a (Lower cases) t 0 (Numbers) t ’ (Symbols) 4 Turn ./> (or press . or > on the remote) to select the desired character. To enter a blank space Press M. To enter a symbol You can use the following symbols. ’– / , . ( ) : ! ? & + < > _ = ” ; # $ % @ ` 5 Press M. The character you selected in step 4 stops flashing and the cursor shifts to the right. 6 Repeat steps 3 to 5 to complete the entire title. If you made a mistake Press m or M until the character you want to change flashes, then repeat steps 3 to 5. To erase a character Press CLEAR on the remote while the character is flashing. You cannot insert characters. 7 Press ENTER/YES to complete the labelling procedure. Note You can label a track title during play. The playback repeats until you finish labelling. continued MD – Editing Labelling an MD (continued) Copying a disc or track title You can copy a labelled disc or track title to use it as a title of another track or the disc title within a disc. 1 Press MENU/NO in stop mode. 2 Turn ./> (or press . or > on the remote) until “Name ?” appears, then press ENTER/YES. 3 Turn ./> (or press . or > on the remote) until “Nm Copy ?” appears, then press ENTER/YES. 4 Turn ./> (or press . or > on the remote) to select “Disc” (when copying the disc title) or the track number with the title you want to copy, then press ENTER/ YES. 5 Turn ./> (or press . or > on the remote) to select the copy destination track number or “Disc” (when copying as the disc title), then press ENTER/YES. When “Overwrite ??” appears The copy destination already has a disc or track title. To continue and copy the title, press ENTER/YES. Checking the titles To check the disc titles, press SCROLL on the remote in stop mode. To check the track title, press SCROLL on the remote during play. The title appears scrolling in the display. To stop scrolling, press SCROLL on the remote. Press the button again to resume scrolling. Erasing the titles 1 Press MENU/NO in stop mode. 2 Turn ./> (or press . or > on the remote) until “Name ?” appears, then press ENTER/YES. 3 Turn ./> (or press . or > on the remote) until “Nm Erase ?” appears, then press ENTER/YES. 4 Turn ./> (or press . or > on the remote) until the desired title to erase appears, then press ENTER/YES. To erase all the titles, turn ./> (or press . or > on the remote) until “Nm All Ers?” appears in step 3, then press ENTER/ YES twice. Erasing recordings —Erase Function The MD deck lets you erase unwanted tracks quickly and easily. The three options for erasing recordings are: • Erasing a single track. (Track Erase) • Erasing all tracks. (All Erase) • Erasing a portion of a track. (A-B Erase) Erasing a single track —Track Erase Function You can erase a track simply by selecting its track number. When you erase a track, the total number of tracks on the MD decreases by one and all the tracks following the erased one are renumbered. E.g.: Erasing track 2. Erase track 2 Track number A C DB123 4 Original tracks 1 23 After ERASE A C D 1 Press FUNCTION repeatedly to switch the function to MD. 2 Press MENU/NO to display “Edit Menu”. 3 Turn ./> (or press . or > on the remote) until “Tr Erase ?” appears, then press ENTER/YES. 4 Turn ./> (or press . or > on the remote) until the desired track number appears. 5 Press ENTER/YES. “Complete!” appears. Note “Erase???” appears when the track was recorded or edited on another deck and then protected. To erase the track, press ENTER/YES while “Erase?...