Votos - , Puntuación media:
(
)
)
Fabricar: Sony
Tamaño del archivo: 296.74 kb
Nombre del archivo: 4238669112.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
“Complete!” appears. To erase all disc titles Press . or > on the remote repeatedly until “All Erase?” appears in step 3, and then press ENTER/YES on the remote twice. To cancel erasing Press MENU/NO on the remote during steps 1 to 4. 14GB Tuner Tuner Presetting radio stations The system can store a total of 30 preset stations (20 for FM and 10 for AM). You can then tune in any of those stations simply by selecting the corresponding preset number. There are two ways to store the preset stations. To Method Automatically tune in all of the stations that can be received in your area and then store them manually Automatic Tuning Preset Manually tune in and store the radio frequency of your favourite stations Manual Tuning Preset Setting presets through automatic tuning 1 Press TUNER/BAND to select “FM” or “AM”. 2 Press PLAY MODE/TUNING MODE repeatedly until “AUTO” appears in the display. 3 Press TUNING + or –. The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, “TUNED” and “STEREO” (for stereo program only) appear. If “TUNED” does not appear and the scanning does not stop Set the frequency of the desired radio station as described in steps 2 to 8 of “Setting presets through manual tuning”. 4 Press MENU/NO on the remote. 5 Press TUNING + or – repeatedly until “Memory?” appears, and then press ENTER/YES on the remote. A preset number appears in the display. Perform steps 6 and 7 while the preset number is flashing. 6 Press TUNING + or – repeatedly to select the desired preset number. 7 Press ENTER/YES on the remote. “Complete!” appears, and then the station is stored. 8 Repeat steps 1 to 7 to preset other stations. Tip Press PLAY MODE/TUNING MODE when you want to stop scanning. Setting presets through manual tuning 1 Press TUNER/BAND to select “FM” or “AM”. 2 Press PLAY MODE/TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display. 3 Press TUNING + or – repeatedly to tune in the desired station. 4 Press MENU/NO on the remote. 5 Press TUNING + or – repeatedly until “Memory?” appears, and then press ENTER/YES on the remote. A preset number appears in the display. Perform steps 6 and 7 while the preset number is flashing. 6 Press TUNING + or – repeatedly to select the desired preset number. 7 Press ENTER/YES on the remote. “Complete!” appears, and then the station is stored. 8 Repeat steps 1 to 7 to preset other stations. Tuner continued 15GB Presetting radio stations (continued) Other operations To Do this Tune in a weak Follow the procedure station described in “Setting presets through manual tuning”. Cancel presetting Press MENU/NO on the remote in step 5 or 6. Change the preset Start over from step 1. number To change the AM tuning interval (not applicable on the European model) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). To switch the AM tuning interval, tune in any AM station first, then turn off the system. Pressing and holding down FUNCTION, turn the system back on. When you change the interval, all the AM preset stations are erased. To change back to the original interval, repeat the same procedure. Tips • The preset stations are saved in the system’s memory for about a day even if you disconnect the power cord or a power failure occurs. • You can label the preset stations (see page 17). • To improve the reception, adjust the supplied antennas or connect an external antenna. Listening to the radio You can listen to a radio station either by selecting a preset station or by manually tuning in a station. Listening to a preset station —Preset Tuning Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 15). 1 Press TUNER/BAND to select “FM” or “AM”. 2 Press PLAY MODE/TUNING MODE repeatedly until “PRESET” appears in the display. 3 Press TUNING + or – repeatedly to select the desired preset station (or station name* or RDS station name**). * The station name appears only if you have labelled the station (see “Labelling the preset stations ” on page 17). ** European model only. To select a desired preset number using the numeric buttons on the remote Press numeric buttons instead of performing step 3. To enter preset number over 10, press >10 and enter the corresponding digits. To enter 0, press 10/0 instead. Example: To enter preset number 20, press >10, then 2 and 10/0. Listening to a non-preset radio station —Manual Tuning 1 Press TUNER/BAND to select “FM” or “AM”. 2 Press PLAY MODE/TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display. 3 Press TUNING + or – repeatedly to tune in the desired station. Tips • To improve the reception, adjust the supplied antennas or connect an external antenna. • If there is static during an FM broadcast, press FM MODE on the remote until “MONO” appears in the display. The broadcast will no longer be in stereo, but the reception will improve. • In step 2, press PLAY MODE/TUNING MODE repeatedly ...
Otros modelos de este manual:- ()