Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Disc tray number Total playing time (including selected track) Selected track number 5 Press ENTER on the remote. The track is programed. The program step number appears, followed by the total playing time. 6 Program additional discs or tracks. To program Repeat steps Other discs 3 and 5 Other tracks on the 4 and 5 same disc Other tracks on other 3 to 5 discs 7 Press H (or N on the remote). Other Operations To Do this Cancel Program Press PLAY MODE on the Play remote repeatedly until “PGM” and “SHUF” disappear. Clear a track from Press CLEAR on the remote in the end stop mode. Tips • The program you made remains after Program Play finishes. To play the same program again, press CD, then press H (or N on the remote). • “--.--” appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over. 12GB Tuner Presetting radio stations You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number. There are two ways to store the station presets. To Method Automatically preset all of the stations that can be received in Automatic Tuning Preset your area Manually set the radio frequency of your favourite stations Manual Tuning Preset Setting presets through automatic tuning 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press and hold m or M (or TUNING – or + on the remote) until the frequency indication starts to change, then release it. Scanning stops automatically when the system tunes in a station. “TUNED” and “STEREO” (for an FM stereo program) appear. If “TUNED” does not appear and the scanning does not stop Set the frequency of the desired radio station as described in steps 2 through 6 of “Setting presets through manual tuning”. 3 Press TUNER MEMORY on the remote. A preset number appears in the display. The stations are stored from preset number 1. Preset number 4 Press . or > (or PRESET – or + on the remote) repeatedly to select the desired preset number. 5 Press ENTER on the remote. 6 Repeat steps 1 to 5 to store other stations. continued Tuner 13GB Presetting radio stations (continued) Other Operations To Do this Setting presets through manual tuning 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press m or M (or TUNING – or + on the remote) repeatedly to tune in the desired station. 3 Press TUNER MEMORY on the remote. A preset number appears in the display. The stations are stored from preset number 1. 4 Press . or > (or PRESET – or + on the remote) repeatedly to select the desired preset number. 5 Press ENTER on the remote. 6 Repeat steps 1 to 5 to store other stations. Tune in a station Follow the procedure described in with a weak “Setting presets through manual signal tuning”. Set another Start over from step 1. After step station to an 3, press . or > (or PRESET existing preset – or + on the remote) repeatedly to number select the preset number you want to store the other station. To change the AM tuning interval (except for the European and Middle Eastern models) The AM tuning interval is factory-set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding down TUNER/BAND, turn the system back on. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Note You cannot change the AM tuning interval in the Power Saving Mode. Tips • The preset stations are retained for half a day even if you disconnect the mains lead or if a power failure occurs. • To improve broadcast reception, reorient or move the supplied antenna near a window or outdoors. 14GB Listening to the radio Listening to the radio You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. Listening to a preset station —Preset Tuning Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 13). 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press . or > (or PRESET – or + on the remote) repeatedly to select the desired preset station. Preset number Frequency Listening to non-preset radio station —Manual Tuning 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press m or M (or TUNING – or + on the remote) repeatedly to tune in the desired station. Tips • To improve broadcast reception, adjust the supplied antennas. • When an FM stereo program has static noise, press STEREO/MONO on the remote repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve. • Press and hold m or M (or TUNING – or + on the remote). The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning). • To record from the radio, see “Recording to a tape” on page 18 or “Timer-recording radio programs” on page 19. Tuner 15GB Tape Using the Radio Data System (RDS) Loading a tape (MHC-RG110/RG33/RG22, MHC-...
Otros modelos de este manual:estéreo - MHC-GX20 (266.34 kb)
estéreo - MHC-GX30 (266.34 kb)
estéreo - MHC-RG22 (266.34 kb)
estéreo - MHC-RG33 (266.34 kb)