Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Cannot Play The system cannot play the track because of damage to the audio data. Cannot Rec You tried to record to the HD with HD selected as the sound source. You tried to perform manual recording from the CD with “AUTO” selected as the storage mode. You pressed REC with “AUTO” selected as the storage mode. You tried to record a CD to the HD without loading the CD. Cannot STORAGE You tried to record to the HD with less than 131 recordable tracks remaining on the HD. You tried to record to the HD with less than 240 minutes of recordable time remaining on the HD. You tried to perform High-Speed Synchro Storage with no blank album in the Library area. Check OPT-IN A moment’s lighting is due to the signals of the digital program being recorded. This does not affect the recorded material. While recording from a digital component connected through the DIGITAL OPTICAL IN jack, the digital connecting cable was unplugged or the digital component turned off. Complete! The editing operation of the HD is completed. The system is copying a title or artist name. Copying The system is copying the text data. 62GB Drive Error Consult your Sony dealer or local authorized Sony service facility. Drive Full! Recording tracks is not possible because there is not enough recordable space on the HD or the maximum number of recordable tracks has been reached. Erasing The system is erasing data from the HD. Do not disconnect the power cord. Format Error Consult your Sony dealer or local authorized Sony service facility. Impossible You tried to make an impossible editing or recording operation. Library Making The system is recording data to the HD. Name Full! The naming capacity of the HD has reached its limit (about 127 characters). No Name The album or track has not been labelled. No Signal The system has detected a silent portion during recording. Not Found No matches were found for Keyword Search. Please Wait You tried to perform High-Speed Synchro Storage while the system was collating data between the CD and the HD. You tried to perform High-Speed Synchro Storage while the system was preparing for Auto Storage and High-Speed Synchro Storage. Push STOP! You pressed PLAY MODE on the remote during playback. You pressed SEARCH on the remote during playback. Rec Error Proper recording is not possible. – Rehearsal – The HD is playing the specified dividing point for confirmation during the Divide function. The HD is playing the specified Highlight position for confirmation during the Highlight Play function. REMOTE The system is being connected to your computer.* Retry The system is retrying reading data from the CD during High-Speed Synchro Storage. Smart Space The signal was input again after silence continued for 3 or more but less than 30 seconds during digital recording. STORAGE NOW You tried to turn off the system while the system was storing data to the HD. TOC Reading The system is reading data from the HD. Track End You have reached the end of the track while adjusting the dividing point during the Divide function. Track Full! Recording tracks is not possible because there are 400 tracks in the album. Select another album for recording. Timer OFF TIME NG! The stopping time is the same as the starting time in the Daily Timer operation. OVERLAP! The Daily Timer or timer-recording setting that you attempted to make partially or wholly coincides with another setting. * If “REMOTE” appears under other circumstances, turn off the system, then turn on it again. Troubleshooting 63GB Additional Information Additional Information Precautions The nameplate is located on the rear exterior. On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. On safety • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • Be sure to turn off the system before disconnecting the power cord. • Unplug the system from the wall outlet (mains) if it will not be used for an extended period of time. To disconnect the power cord (mains lead), pull it out by the plug. Never pull the cord itself. • Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further. • AC power cord must be changed only at the qualified service shop. On placement • Do not place the system in an inclined position. • Do not place the system in locations where it is: — Extremely hot or cold — Dusty or dirty — Very humid — Subject to vibrations — Subject to direct sunlight On heat buildup • Although the unit heats up during operation, this is not a malfunction. • To prevent heat build-up in the system, place the system in a location with adequate ventilation and refrain from placing anything on the top of the cabinet. If you continuously use this system at a large volume, the cabinet temperature of the t...