Votos - 6, Puntuación media: 4.3
(
)
)
|
Fotos y especificaciones Sony MHC-WZ80D |
Resumen del manual
. The display will ask you to enter a new 4-digit password. After you enter a new 4-digit password, replace the disc in the system and press nN. When the “PARENTAL CONTROL” display appears, enter your new password. 30GB Area code Standard Code number Argentina 2044 Australia 2047 Austria 2046 Belgium 2057 Brazil 2070 Canada 2079 Chile 2090 China 2092 Denmark 2115 Finland 2165 France 2174 Germany 2109 Hong Kong 2219 India 2248 Indonesia 2238 Italy 2254 Japan 2276 Korea 2304 Malaysia 2363 Mexico 2362 Netherlands 2376 New Zealand 2390 Norway 2379 Pakistan 2427 Philippines 2424 Portugal 2436 Russia 2489 Singapore 2501 Spain 2149 Sweden 2499 Switzerland 2086 Taiwan 2543 Thailand 2528 United Kingdom 2184 Speaker settings — SPEAKER SETUP To obtain the best possible surround sound, set the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume and the balance of the speakers to the same level. Setting the speakers 1 Press DVD SET UP in stop mode. The Setup Display appears. 2 Press M or m repeatedly to select “SPEAKER SETUP”, then press ENTER. 3 Press M or m repeatedly to select “SIZE” or “DISTANCE”, then press ENTER. 4 Press M or m repeatedly to select the setup item, then press ENTER. 5 Press M or m repeatedly to select or set a setting, then press ENTER. x SIZE When you do not connect center or surround speakers, or you move the surround speakers, set the parameters for CENTER, SURROUND and SUBWOOFER. Since the front speaker setting is fixed, you cannot change it. DVD – Various functions FRONT YES CENTER YES: Normally select this position. NONE: Select this when a center speaker is not used. SURROUND YES: Normally select this. BEHIND (LOW), BEHIND (HIGH), SIDE (LOW), SIDE (HIGH)*: Specify the position and height to implement the Digital Cinema Surround modes. NONE: Select this when surround speakers are not used. SUBWOOFER NONE: Normally select this. YES: Select this when an optional sub woofer is used. * These settings are not available on European and Latin American models. continued 31GB Note When connecting a sub woofer, make sure to set the SUBWOOFER setting to “YES”. If set to “NONE”, no sound is output from the sub woofer. Specifying the surround speaker position and height (except for European and Latin American models) If you select anything other than “NONE” in “SURROUND”, specify the position and height of the surround speakers. BEHIND (LOW) Select this if the surround speakers are located in section B and D. BEHIND (HIGH) Select this if the surround speakers are located in section B and C. SIDE (LOW) Select this if the surround speakers are located in section A and D. SIDE (HIGH) Select this if the surround speakers are located in section A and C. Position diagram 90 20 45 Height diagram x DISTANCE The default distance setting for the speakers in relation to the listening position is shown below. 3m 3m 3m 3m 3m Be sure to change the value in the Setup Display when you move the speakers. FRONT Front speaker distance from the 3.0 m listening position can be set in 0.2 meter increments from 1.0 to 7.0 meters. CENTER Center speaker distance can be 3.0 m moved up to 1.6 meters closer to the listening position, from the front speakers in 0.2 meter increments. SURROUND Surround speaker distance can be 3.0 m moved up to 4.6 meters closer to the listening position, from the front speakers, in 0.2 meter increments. Notes • If each of the front and surround speakers are not placed at an equal distance from your listening position, set the distance of the closest speaker. • Do not place the surround speakers farther away from your listening position than the front speakers. 60 30 32GB Adjusting the speaker volume and level 1 Press DVD SET UP in stop mode. The Setup Display appears. 2 Press M or m repeatedly to select “SPEAKER SETUP”, then press ENTER. 3 Press M or m repeatedly to select “TEST TONE”, then press ENTER. 4 Press M or m repeatedly to select “ON”, then press ENTER. You will hear the test tone from each speaker in sequence. 5 From your listening position, adjust the value of “BALANCE” and “LEVEL” using M/m/Otros modelos de este manual:
estéreo - MHC-WZ8D (927.12 kb)