Votos - 3, Puntuación media: 3.7
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Program Play starts. Other operations To Do this Cancel Program Press PLAY MODE in stop Play mode repeatedly until “PGM” disappears. Clear a track from Press CLEAR in stop mode. the end Tips • The program you made remains after Program Play finishes. To play the same program again, press CD, then press N. However, the program is cleared when you open the disc tray. • “– –.– –” appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over, or when you select an MP3 audio track. 12GB Tuner Presetting radio stations You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number. Automatic tuning preset You can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations. 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press and hold TUNING –/+ (or –m or M+ on the unit) until the frequency indication starts to change, then release it. The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, “TUNED” and “STEREO” (for an FM stereo program) appear. If “TUNED” does not appear and the scanning does not stop Set the frequency of the desired radio station as described in steps 2 and 6 of “Manual tuning preset” (page 13). 3 4 5 6 Press TUNER MEMORY. A preset number appears. Preset number Press PRESET –/+ (or . or > on the unit) repeatedly to select the desired preset number. Press ENTER. Repeat steps 1 through 5 to store other stations. Tuner Manual tuning preset You can manually tune in and store the radio frequency of the desired stations. 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press TUNING –/+ (or –m or M+ on the unit) repeatedly to tune in the desired station. 3 Press TUNER MEMORY. A preset number appears. 4 Press PRESET –/+ (or . or > on the unit) repeatedly to select the desired preset number. 5 Press ENTER. 6 Repeat steps 1 through 5 to store other stations. continued 13GB Other Operations Listening to the radio To Do this Tune in a station Follow the procedure described with a weak signal in “Manual tuning preset” (page 13). Set another station Start over from step 1. After to the existing step 3, press PRESET –/+ (or preset number . or > on the unit) repeatedly to select the preset number you want to store the other station. To change the AM tuning interval (except for European, Russian, Middle Eastern and Philippine models) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding TUNER/ BAND on the unit, press ?/1 on the unit. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Note You cannot change the AM tuning interval in the Power Saving Mode. Tips • The preset stations are retained for about a day even if you disconnect the power cord or if a power failure occurs. • To improve the reception, adjust the supplied antennas or connect an external antenna. You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. Listening to a preset station — Preset Tuning Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 13). 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press PRESET –/+ (or . or > on the unit) repeatedly to select the desired preset station. Preset number Frequency 14GB Listening to non-preset radio station — Manual Tuning 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press TUNING –/+ (or –m or M+ on the unit) repeatedly to tune in the desired station. Tips • To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna. • When an FM stereo program has static noise, press FM MODE or STEREO/MONO* repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve. • Press and hold TUNING –/+ (or –m or M+ on the unit). The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning). • To record the radio programs, use manual recording (page 17). * for MHC-GX25 and MHC-RG220 (except for European and Russian models) Using the Radio Data System (RDS) (European model only) What is the Radio Data System? Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. RDS is available only on FM stations.* Note RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak. * Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio statio...
Otros modelos de este manual:estéreo - MHC-GX25 (412.53 kb)
estéreo - MHC-GX35 (412.53 kb)
estéreo - MHC-GX45 (412.53 kb)
estéreo - MHC-RG220 (412.53 kb)