Votos - , Puntuación media:
(
)
)
Fabricar: Sony
Tamaño del archivo: 421.54 kb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Otros manuales para este modelo:
Resumen del manual
If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). Getting Started E e e E Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Attaching the front speaker pads Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Front speaker (Left (4)/Right (4)) Surround speaker (Left (4)/Right (4))* * MHC-RG660 only continued 7GB Notes • Keep the speaker cords away from the antennas to prevent noise. • Do not place the surround speakers on top of a TV. This may cause distortion of the colors in the TV screen. • Be sure to connect both left and right surround speakers. Otherwise, the sound will not be heard. When carrying this system Perform the following procedure to protect the CD mechanism. 1 Make sure that all discs are removed from the system. 2 Hold down CD and then press ?/1 until “STANDBY” appears. When you release the buttons, “LOCK” appears. 3 Unplug the power cord. Positioning the speakers (MHC-RG660 only) 1 Place the front speakers at an angle of 45 degrees from your listening position. Front speaker (L) Front speaker (R) Surround speaker (L) Surround speaker (R) 2 Place the surround speakers facing each other at about 60 to 90 cm above your listening position. Surround speaker 60 to 90 cm 8GB Setting the clock 1 Press ?/1 to turn on the system. 2 Press CLOCK/TIMER SET. 3 Press v or V repeatedly to set the hour. 4 Press B. 5 Press v or V repeatedly to set the minute. 6 Press ENTER. The clock starts working. To adjust the clock 1 Press CLOCK/TIMER SET. 2 Press v or V to select “CLOCK SET”, then press ENTER. 3 Do the same procedures as step 3 to 6 above. Note The clock settings are canceled when you disconnect the power cord or if a power failure occurs. Getting Started 9GB CD/MP3 – Play Loading a disc 1 Press Z on the unit. 2 Place a disc with the label side up on the disc tray. Playing a disc — Normal Play/Shuffle Play This system lets you play audio CDs and discs with MP3 audio tracks. Example: When a disc is loaded Disc tray number Track number To insert additional discs, press DISC SKIP/EX-CHANGE on the unit to rotate the disc tray. 3 Press Z on the unit again to close the disc tray. Notes • Do not use a disc with tape, seals or paste on it as this may cause malfunction. • Do not forcibly press the disc tray closed with your finger, as this may cause malfunction. Disc indicator Playing time 1 Press CD. 2 Press PLAY MODE on the unit repeatedly in stop mode until the mode you want appears in the display. Select To play ALL DISCS All discs in the disc tray (Normal Play) continuously. 1DISC The tracks on the disc you (Normal Play) have selected in original order. ALBM All MP3 audio tracks in the (Normal Play) album on the disc you have selected in original order. When playing a non-MP3 disc, Album Play becomes 1DISC Play. ALL DISCS The tracks on all discs in SHUF (Shuffle random order. Play) 1DISC SHUF The tracks on the disc you (Shuffle Play) have selected in random order. ALBM SHUF The MP3 audio tracks in the (Shuffle Play) album on the disc you have selected in random order. When playing a non-MP3 disc, Album Shuffle Play becomes 1 DISC SHUF Play. PGM The tracks on the disc in the (Program Play) order you want them to be played (see “Creating your own program” on page 12). 3 Press nN. 10GB Other operations To Do this Stop play Press x. Pause Press X. Press again to resume play. Select a track Press . or > repeatedly. Select an album Press ALBUM – or + repeatedly of MP3*1 after step 2. Find a point in a Keep pressing m or M during track*2 playback and release it at the desired point. Select a disc in Press D. SKIP (or DISC 1 – 3*3 or stop mode DISC SKIP/EX-CHANGE on the unit). Switch to CD Press DISC 1 – 3 on the unit function from (Automatic Source Selection). other function Exchange other Press DISC SKIP/EX-CHANGE discs while on the unit. playing Remove a disc Press Z on the unit. *1 You may not be able to search between multiple files. Also, the time may not be displayed correctly for some files. *2 except for MP3 audio tracks *3 DISC 1 – 3 on the unit are not available when “ALL DISCS SHUF” is selected. Notes • You cannot change the play mode during playback. • Some time may be needed to start playback of discs recorded in complex configurations such as many layers. • When the disc is inserted, the player reads all the tracks on that disc. If there are many albums or nonMP3 audio tracks on the disc, it may take a long time for play to begin or for the next MP3 audio track to start play. • Do not save unnecessary albums or tracks other than MP3 ones in the disc to be used for MP3 listening. We recommend that you do not save other ty...
Otros modelos de este manual:estéreo - MHC-RG550 (421.54 kb)
- ()
- ()