Votos - 4, Puntuación media: 4
(
)
)
|
Fotos y especificaciones Sony MHC-RG444S |
Otros manuales para este modelo:
Resumen del manual
Other operations To Do this Tune in a station Follow the procedure described with a weak signal in “Manual tuning preset” (page 15). Set another station Start over from step 2. After to the existing step 5, press – or + (or TUNING preset number – or + on the unit) repeatedly to select the preset number you want to store the other station. Tuner continued 15GB To change the AM tuning interval (except for European, Russian and Saudi Arabian models and Australian model MHC-RG444S) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding TUNING MODE on the unit, press ?/1 on the unit. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Note You cannot change the AM tuning interval in Power Saving Mode (page 27). Tips • The preset stations are retained for about a day even if you disconnect the power cord or if a power failure occurs. • To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna. Listening to the radio You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. Listening to a preset station —Preset Tuning Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 15). 1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner. 2 Press TUNER BAND repeatedly to select “FM” or “AM”. 3 Press TUNING MODE repeatedly until “PRESET” appears in the display. 4 Press – or + (or TUNING – or + on the unit) repeatedly to select the desired preset station. Preset number Frequency 16GB Listening to non-preset radio station — Manual Tuning 1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner. 2 Press TUNER BAND repeatedly to select “FM” or “AM”. 3 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display. 4 Press – or + (or TUNING – or + on the unit) repeatedly to tune in the desired station. Tips • To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna. • When an FM stereo program has static noise, press FM MODE repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve. • Press TUNING MODE repeatedly until “AUTO” appears in step 3 above, then press – or + (or TUNING – or + on the unit). The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning). • To record the radio programs, use manual recording (page 20). Using the Radio Data System (RDS) (European model only) What is the Radio Data System? Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. RDS is available only on FM stations.* Note RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak. * Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name appears in the display. To check the RDS information Each time you press DISPLAY, the display changes cyclically as follows: Station name1) t Preset number2) and frequency t Clock display t Effect status 1) If the RDS broadcast is not properly received, the station name may not appear in the display. 2) Preset number is displayed only if you preset radio stations (page 15). Tuner 17GB Tape – Play Loading a tape Use buttons on the unit for the operation. 1 Press TAPE A/B repeatedly to select deck A or B. 2 Press PUSH Z. 3 Load a recorded/recordable tape in deck A or B with the side you want to play/record facing forward. With the side you want to play/record facing forward. Playing a tape You can use TYPE I (normal) tape. For MHC-RG555 1 Load a tape. 2 Press PLAY MODE repeatedly to select g to play one side. Select j1) to play both sides. To play both decks in succession, press PLAY MODE repeatedly until “RELAY” (Relay Play)2) appears in the display. 3 Press N (or hH on the unit). The tape starts playing. Press the button again to play the reverse side. 1) The tape deck stops automatically after repeating the sequence five times. 2) Relay Play always follows this cyclic sequence up to five times, then stops: Deck A (front side) t Deck A (reverse side) t Deck B (front side) t Deck B (reverse side) For other models 1 Load a tape. To play both decks in succession, press PLAY MODE repeatedly until “RELAY” (Relay Play)* appears in the display. 2 Press N. The tape starts playing. * After the playback of the front side of deck A, deck B plays...
Otros modelos de este manual:estéreo - MHC-GX250 (531.14 kb)
estéreo - MHC-GX450 (531.14 kb)
estéreo - MHC-GX750 (531.14 kb)
estéreo - MHC-RG555 (531.14 kb)