Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
iPhone only when the system is on. of broadcasts. (Performing this procedure clears all (including the “ROOT” folder and empty folders). Laser Output*: Less than 44.6.W Precautions The system does not turn on. previously stored presets.) * This output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. These numbers may vary depending on the file and folder structure. The ring volume of the iPhone does not Do not save other types of files or unnecessary folders on the USB device that has audio files. . Is the AC power cord plugged in? Using the timers change. The DAB/DAB+ broadcast has been interrupted Frequency response: 20 Hz . 20 kHz Signal-to-noise ratio: More than 90 dB Adjust the ring volume on the iPhone. (CMT.G1BiP only) This system displays the track number as “---” when the number of . . The system has entered the Standby mode Dynamic range: More than 90 dB Tuner section The system offers 2 timer functions. If you use both Discs that this system CAN play audio files on a USB device exceeds 1000. Change the location of the system or adjust the . unexpectedly. The system can play back to a depth of 8 folders only. timers, the Sleep Timer has priority. . . Audio CD . . USB device orientation of the antenna to increase the indicated AM tuner section: This is not a malfunction. The system enters the . This system does not necessarily support all the functions provided CD-R/CD-RW (audio data/MP3 files) Tuning range: value of the signal quality. Refer to “Changing the Sleep Timer: in a connected USB device. Standby mode automatically in about 30 minutes when European model: Are you using a supported USB device? display” for further details on the signal quality. Folders that have no audio files are skipped. . . You can fall asleep to music. This function works even if there is no operation or audio signal output. See “To 531 — 1,602 kHz (with 9 kHz tuning interval) Discs that this system CANNOT play Other models: The audio formats that you can listen to with this system are as If you connect an unsupported USB device, the . turn off the Automatic Standby function.” the clock is not set. CD-ROM 530 — 1,710 kHz (with 10 kHz tuning interval) . . follows: To change the AM tuning interval following problems may occur. Check the information Press SLEEP repeatedly. 531 — 1,710 kHz (with 9 kHz tuning interval) Antenna: AM loop antenna MP3: file extension “.mp3” . . . CD-R/CD-RW other than those recorded in music The clock setting or the Play Timer operation on the websites about compatible USB devices with The AM tuning interval is factory-preset to 9 kHz (or WMA: file extension “.wma” AAC: file extension “.m4a” CD format or MP3 format conforming to ISO9660 URLs listed under “Playing a file of the USB device.” Intermediate frequency: 400 kHz Play Timer: has been cancelled unexpectedly. 10 kHz for some areas; this function is not available on FM tuner section: Level 1/Level 2, Joliet The USB device is not recognized. . . . . . . You can wake up to CD, FM reception, AM reception . If about a minute elapses with no operation, the the European model). Note that even when file name has the correct file extension, FM stereo, FM superheterodyne tuner Tuning range: CD-R/CD-RW recorded in multisession that have not . . if the actual file differs, the system may produce noise or may DAB/DAB+ reception (CMT-G1BiP only), USB device at clock setting or the Play Timer setting is cancelled File or folder names are not displayed on this system. Use buttons on the unit to change the AM tuning ended by “closing the session” CD-R/CD-RW of poor recording quality, 87.5 MHz — 108.0 MHz (50 kHz step) Antenna: FM lead antenna Antenna terminals: 75 ohms unbalanced malfunction. a preset time. Make sure you have set the clock. automatically. Perform the operation again from the Playback is not possible. interval. beginning. The sound skips. To use the system as a battery charger 1 Prepare the sound source. 1 Tune in any AM station, and then turn off the CD-R/CD-RW that have scratches or are dirty, Intermediate frequency: 200 kHz, 250 kHz, 300 kHz, 350 kHz, 400 kHz There is noise. You can use the system as a battery charger for the USB system. Prepare the sound source, and then press VOLUME DAB/DAB+ tuner section (CMT-G1BiP only) There is no sound. or CD-R/CD-RW recorded with an incompatible FM stereo, DAB/FM superheterodyne tuner A distorted sound is output. devices that have a rechargeable function when the system is on. The charging begins when the USB device is connected +/. to adjust the volume. To start from a specific CD track or audio file, create your own program. recording device Are the + and . speaker cords short-circuited? 2 Press ...while holding down TUNING +. . . . Frequency range* CD-R/CD-RW which is finalized incorrectly Band-III: 174.928 (5A) MHz — 239.200 (13F) MHz . . Are you using only the supplied speakers? All the AM preset stations are eras...
Otros modelos de este manual:estéreo - CMT-G1BIP (667.09 kb)