Votos - , Puntuación media:
(
)
)
Fabricar: Philips
Tamaño del archivo: 541.52 kb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
1 Tune to a DAB station. 2 Press PROG on the remote control to activate programming. 3 Press / on the remote control to allocate a number (1-30) for the preset. 4 Press PROG to confirm. Note ••If a DAB station is already stored under a preset location, new DAB station assigned to this location will overwrite the old DAB station. ••DAB station presets will not overwrite FM presets. Scan for new DAB stations New stations and services will be regularly added in the DAB broadcast. To make new DAB stations and service available on your DAB radio, a search is needed. 1 In DAB mode, press SCAN. »»The unit starts to scan for DAB stations. Listen to a preset DAB radio station 1 Press / to select a preset number on the main unit. Display DAB information On the display of DAB broadcasting, the first line shows station name, and the second line shows the service information for the current station. Seven types of service information are available. 1 Press RDS/DISPLAY repeatedly to cycle through the display information (if available). »»Dynamic label segment (DLS) »»Program type (PTY) »»Ensemble Name »»Time »»Channel and frequency »»Bit rate and audio status »»Signal error rate Use DAB menu 1 In the DAB mode, press MENU to enter the DAB menu. »»The first setup option [Station list] displays. 2 Press / to scroll the menu options: • [Station list] • [Full scan] • [Manual tune] EN • [DRC] • [Prune] • [System] 3 To select an option, press ENTER. 4 Repeat step 2-3 if sub-option is available under one option. Full scan Full scan is used to perform a wide range of DAB radio search. 1 In the DAB mode, press MENU to enter the menu options. 2 Press / repeatedly until [Full scan] displays. 3 Press to confirm the selection. »»Full scan starts automatically. Manual tune With this feature, you can tune to a specific channel/frequency manually. In addition to antenna orientation for better radio reception, the optimal reception can also be obtained with this feature. 1 In DAB mode, press MENU to display the [Manual tune] option. 2 Press ENTER to confirm the selection. »»The display shows a channel and its frequency. 3 Press / repeatedly until the desired channel/frequency appears. 4 Press ENTER to confirm the selection. Tip ••You can press RDS/DISPLAY to change the service information on the display. ••You can adjust the position of the antenna to obtain the optimal signal strength. Dynamic Range Control (DRC) DRC adds or removes a degree of compensation for the differences in the dynamic range between radio stations. There are three levels of compensation: • [DRC Off]: No compensation applied. (the default) • [DRC Low]: Maximum compensation applied. • [DRC High]: Medium compensation applied. 1 In DAB mode, press MENU to enter the menu options. 2 Press / repeatedly until [DRC] displays. 3 Press ENTER to enter the sub-menu. »»The current DRC level displays on the first line. 4 Press...