Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
1 Turn the SOURCE knob to select PHONO/AUX mode. 2 Connect the audio in cable to • the AUDIO IN socket on the front panel of this product, and • the headphone jack on the external device. 3 Play the external device (refer to its user manual). EN 7 Other features Set the sleep timer This micro sound system can automatically switch to standby after a set period of time. • When the micro system is turned on, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). • [SLEEP -- 90] • [SLEEP -- 75] • [SLEEP -- 60] • [SLEEP -- 45] • [SLEEP -- 30] • [SLEEP -- 15] • [OFF] » When sleep timer is activated, [SLEEP] is displayed. To deactivate sleep timer • Press SLEEP/TIMER repeatedly until [SLEEP OFF] (sleep off) is displayed. » When sleep timer is deactivated, [SLEEP] disappears. Set the alarm timer This micro system can be used as an alarm clock.The disc, USB, or tuner is activated to play at a preset time. 1 Press to switch the unit to standby mode. 2 Make sure that you have set the clock correctly. 3 Press and hold SLEEP/TIMER. » A prompt to select the source is displayed. 4 Press SOURCE repeatedly to select a source: CD, USB, or FM. 5 Press SLEEP/TIMER to confirm. » The hour digits begin to blink. 6 7 Press / to set the hour. Press SLEEP/TIMER to confirm. » The minute digits begin to blink. 8 9 Press / to set the minute. Press SLEEP/TIMER to confirm. » The timer is set and activated. Activate and deactivate the alarm timer 1 Press to switch the micro system to standby mode. 2 Press SLEEP/TIMER repeatedly to activate or deactivate the timer. » If the timer is activated, the display shows . » If the timer is deactivated, is not shown on the display. Note • If DISC/USB source is selected and the track cannot be played, tuner is automatically activated. • The micro sound system automatically switches to standby mode if no operation is performed within 30 minutes after the alarm source is activated. Adjust the volume Turn the VOLUME knob to increase/decrease volume. EN 8 Product Amplifier Rated Output Power Frequency Response 60 Hz - 16 kHz, ±3 dB 1.5 W x 2 RMS information Note • Product information is subject to change without prior notice. Specifications General information AC Power Rating 220 - 240 V~, 50 Hz Operation Power Consumption 16 W Standby power < 1 W consumption Weight (Main Unit) 2.5 kg Dimensions - Main Unit (WxHxD)335 x 311 x 169 mm Tuner Tuning Range FM: 87.50 - 108.00 MHz; Tuning grid 50 kHz Total Harmonic < 2% Distor tion Signal to Noise Ratio > 50 dB Number of preset 20 radio stations Vinyl Suppor ted vinyl size 7 inch 12inch Signal to Noise Ratio > 65 dB Aux Input 0.5 V RMS 20 kohm Speakers Speaker Impedance Speaker Driver 2 X 3" full range 4 ohm Sensitivity 84 dB/m/W Bluetooth Communication Bluetooth Standard system version 2.1 Output Bluetooth Standard Power Class 2 Maximum Line of sight approx. 10m communication (30 feet) range...