Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
R700 0100 USER GUIDE Radial Engineering Ltd. 1588 Kebet Way, Port Coquitlam BC V3C 5M5 tel: 604-942-1001 • fax: 604-942-1010 email: info@radialeng.com • web: Specifications and appearance are subject to change without notice. Copyright © 2011 Radial Engineering Ltd. THIS PAGE INTENTIONALY LEFT BLANK Radial Workhorse ™ 500 Series Rack and Mixer Congratulations and thank you for purchasing the Radial Workhorse, an innovative eight channel card frame and mixer designed to take full advantage of 500 series modules. This manual covers installation and operation of the Workhorse. We recommend that you take a few minutes to read through this manual in order to familiarize yourself with the many innovative features incorporated into the Workhorse. Inside, you will fi nd important safety features along with tips on how to get the most out of your 500 modules while using the Radial Workhorse. To make the manual as easy to understand as possible, we have divided it into several sections. It begins with on overview, then descriptions of each function, ending with some real world applications. Should you have any questions, comments or concerns not covered in these pages, we invite you to log onto the Radial web site at and visit the Workhorse FAQ section. This is where we post the latest details and applications. If you do not find what you need, feel free to send us an email at info@radialeng.com and we will do our best to answer your question as quickly as possible. Get ready to Plug in, Turn on and Tune in your 500 modules with the Radial Workhorse. Table of Contents Page Front Panel Feature Set Overview ...............................................................................1 Rear Panel Feature Set Overview ................................................................................2 Introduction To The Workhorse ....................................................................................3 Feature Set Overview ...................................................................................................4 Power Supply Capacity ................................................................................................7 Installing The Workhorse ..............................................................................................7 Slide-in Card Slot Tray and Removal ...........................................................................8 Workhorse Signal Flow and Levels ..............................................................................8 Using The Workhorse ...................................................................................................9 Workhorse Applications ................................................................................................11 Frequently Asked Questions ........................................................................................14 Specifications and Block Diagram ................................................................................15 Connector Pin-out ........................................................................................................16 Card Edge Connector Specifications ...........................................................................16 Radial Limited Warranty ................................................................................Back Cover ! IMPORTANT SAFETY & USER NOTICE - FOR PROFESSIONAL USE ONLY The Radial Workhorse is specifically designed for use by qualified professional audio engineers. The open frame design is not intended for use by consumers or those unfamiliar with this format. Even though the current and voltage levels are relatively low, we recommend that all slots be filled with a module or covers be placed over unfilled slots. This will help protect you from electrical shock. The Workhorse™ rack frame and mixer is designed to be used with 500 series or what are commonly known as Lunchbox™ modules. The Workhorse has been designed following the framework as outlined by the VPR Alliance as described on the API™ website. Although some manufacturers build modules that are not VPR compliant, they may in fact work with the Workhorse. Please consult those specific manufacturers for details regarding their compatibility. The Radial Workhorse Open Source Document outlines the required technical specifications for manufacturers that intend to have their modules used in the Workhorse. Compatibility of any modules other than a module made by Radial Engineering Ltd. is the sole responsibility of the user. Please read the Limited Radial Warranty for details. There are no replacement or user serviceable parts inside. Radial Engineering Ltd. 1588 Kebet Way, Port Coquitlam BC V3C 5M5 tel: 604-942-1001 • fax: 604-942-1010 info@radialeng.com • Specifications and appearance are subject to change without notice. Copyright © 2011 Radial Engineering Ltd. FRONT PANEL FEATURE ...