Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
To make full and effective use of this unit, please read this Owner’s Manual carefully before operating. GENERAL WARNING CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclaimation point within an equilateral triangel, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. TABLE OF CONTENTS Congratulations! And thank you for purchasing the Vocopro JKM-7900 PRO. This unit has been designed with the professional KJ and DJ in mind to assist in providing the highest quality Karaoke entertainment available. With proper care and handling, this unit will continue to operate optimally for years. Please read this manual carefully before getting started. Note: This unit requires an external amplifier to operate. Table of Contents ................................................................... 1 Before You Start ..................................................................... 2 Quick Start (REAR PANEL HOOK-UP) 2 Connecting an Amplifier .......................................................... 2 Connecting a Music Source .................................................... 2 Connecting a TV Monitor ... .................................................... 2 Rear Panel Hook-up (Cont.).................................................... 3 Parts And Functions (Microphone Input Module) .................. 4 Parts and Functions (Music Module) .................................... 5 Parts and Functions (Master Control Module) ....................... 6 Expandability Module .............................................................. 7 Specifications................................................... ....................... 7 1 BEFORE YOU START Thank you for purchasing the KJM-7900 Pro. At VocoPro we care about product quality and customer satisfaction. We know the KJM-7900 Pro will provide years of quality service and reliable music entertainment for you when used properly. PEASE READ CAREFULLY BEFORE USING THE KJM-7900 PRO Unpacking the KJM-7900 Pro Carefully remove the KJM-7900 Pro digital mixer from its packaging and operate per manual instructions before discarding the packaging materials. If it should become necessary to return the unit for any reason the original packaging materials are best suited for transporting the unit to minimize any potential damage which may not be covered under the standard warranty. WARNING: To avoid shock or serious injury do not attempt to connect any external devices or cablesto the KJM-7900 without first disconnecting the unit from all power sources. QUICK START (REAR PANEL HOOK-UP) Connecting an Amplifier to the KJM-7900 Pro Master 1 Out Locate the “MASTER 1 OUT” section on the back of the KJM-7900 and the “L” and “R” audio input jacks on your amplification source. Note: you may need a special “RCA to 1/4”” connector cable if you are using an amplifier with “RCA” type jacks. Connect the “L” and “R” audio input connectors of your amplifier to the “L” and “R” 1/4” ouput jacks on the back of the unit, labeled “MASTER 1 OUT”. The “MASTER 1 OUTPUT” section of the KJM-7900 is controled by the “MASTER 1” slide control. Monoitor Out “L” and “R” You can connect the “MONITOR OUT, “L and “R” section of the KJM-7900 Pro to a powered monitor, to achieve a seperate monitor mix for your vocals, by connecting them to the “L” and “R” input connectors of your external “monitor” amplifier. The “MONITOR OUT” section is controled by the “MASTER 2” slide control. Record Out “L” and “R” Connect the “L” and “R” “RECORD OUT” jacks to the left and right ” record in” channels on your recording device. When recording, set your record levels from the KJM-7900 individual channel controls. The master volume will only give an “audible” volume through your external speakers and will have no bearing on the record levels. Connecting a Music Source to the KJM-7900 Pro “Source section 3” CD, Laser Disc and DVD Players (with or without a video source) Locate the “AUDIO IN” section on the back of the KJM-7900. Connect the “L” and “R” output connectors of your player to the corresponding “L” and “R” RCA input jacks on the back of the unit. (example: CD, LD or DVD). Connecting a TV Monitor If there is a video output connector on your player, locate the “VIDEO IN” section on the back of the KJM-7900 (to the right of the “audio in” section) and connect your player’s video out connector to the corresponding “VIDEO IN” connector (example: CD, LD or DVD). Then connect the video line out from the KJM-7900 to ...