Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Changing the setting values Change the setting values using the UP and DOWN keys. Exiting the menu system Press the TIME/ESC key to exit the menu system and go back to the home display mode. TASCAM CD-BT1MKII — 15 Using the CD player The CD player in CD-BT1MKII works in much the same way as other CD players, with a few minor differences and special features. Playback Press the PLAY/PAUSE key (G/J) to start playback and to pause playback. Press the STOP key (H) to stop playback. Skipping between tracks and searching within tracks Use the skip/search keys (m/.. and //,) to move back and forward one track at a time. Use these keys to search within the CD by pressing and holding the key for the direction that you want to search. By continuing to press, the search will speed up. Looping (track/disc) Press the LOOP key to repeat a single track, or all tracks, according to the PLAY item in the Setup menu. Setting Repeat Mode SGL repeats a single current track. LOOP 1 appears on the display. ALL repeats the whole disc. LOOP appears on the display. Looping (In/Out points) To repeat a particular section of a track, use the I/O key to set the start (IN) point of the loop, then use the I/O key to set the end (OUT) point. . Pressing the I/O key during playback or paused playback sets the IN point. The I-O symbol blinks on the display. . Pressing the I/O key again during playback or paused playback sets the OUT point. LOOP and I-O appear on the display. The section between the two points repeats seamlessly. . To cancel an I/O loop, press the LOOP key. LOOP disappears from the display and the loop mode is canceled. Pressing the LOOP key again will restart the previously determined loop. . Pressing the I/O key again clears the loop points. The CUE key The CUE key has two functions that can be set in the Setup menu: Setting Function CUE playback pauses at the point where playback last started. FLS playback “flashes” automatically back to the last point- where playback started. With a TASCAM RC-30P footswitch (sold separately) connected, you can use it instead of the CUE key for hands- free operation. Set the FOOT item in the Setup menu to CUE or FLS (flash). Display In the home display mode press the TIME/ESC key to change the time display between track elapsed time, track remaining time, and total remaining time of the CD. 16 — TASCAM CD-BT1MKII Pitch and tempo changes There are four ways to change the way a CD is played back, using menu items in the Tempo Key menu: Tempo control (TMP), VSA (Variable Speed Audition) setup (VSA), Key control (KEY), and Fine tuning (FINE) Tempo control Tempo control allows you to change the tempo of a track. Tap the TMP/KEY / CD EFF key to enter the Tempo Key menu, and select TMP by pressing either the PREV or NEXT key. TEMPO blinks on the display. When VSA is ON (see below), the settings you can choose are: -50, -32, -16, -12, -8, -4, 0 (off), +4, +8, +12, and +16%. Press the UP or DOWN keys to set the value. When VSA is OFF you can change the setting between –50 and +16% in 1% steps. Press either the UP or DOWN key to set the tempo.When the tempo is set to a value other than zero, TEMPO shows in the home display mode. VSA When VSA is ON, you can change the tempo without changing the key. Tap the TMP/KEY / CD EFF key to enter the Tempo Key menu, select VSA by pressing either the PREV or NEXT key. Press either the UP or DOWN key to choose either ON or OFF. TEMPO blinks on the display. When the VSA is set to ON, the letters VSA are shown in the display. NOTE If the tempo control value is not set to 0 and you change VSA from OFF to ON, the tempo value will be automatically reset to a “VSA ON value.” For example, if the value is [-33] when VSA is OFF, it will automatically be adjusted to [-50] when you turn VSA ON. Key control Key control changes the key of the mu sic up or down by six semitones. Tap the TMP/KEY / CD EFF key to enter the Tempo Key menu, and select KEY by pressing either the PREV or NEXT key. KEY blinks on the display. Press either the UP or DOWN key to set the value for the key. The range is ± 6 semitones (I6 – 0 (off) – O6). When the key is set to a value other than zero, KEY shows in the home display mode. Fine tuning Fine tuning changes the key of the music by cents (100 cents = 1 semitone). This allows you to make fine adjustments and allow for slight tuning differences between your instruments and the CD. Tap the TMP/KEY / CD EFF key to enter the Tempo Key menu, and select FINE by pressing either the PREV or NEXT key. KEY blinks on the display. Press either the UP or DOWN key to set the fine tuning value. The range for adjustment is ±50 cents (-50 – 0 (off) – +50). If the key control is set to O6, however, the available range of fine tuning is between -50 – 0, and when it is set to I6, the fine tuning range is between 0 – +50. When the fine tuning is set to a value other than zero, KEY shows in the home display mode. (continued on the next page) TASCAM CD-BT1MKII — 17 Usin...
Otros modelos de este manual:Instrumentos Musicales - D00851300A (529.22 kb)