Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
• Bank 1 selected. 3While holding down the STORE button, press a REGISTRATION button (1 to 4). • The following display appears when you press the 2 button. 4Release the STORE and REGISTRATION buttons. NOTE • The setup is saved as soon as you press a REGISTRATION button in step 3, above. Ba1- kn St1-2 r e o To Recall a Setup from Registration Memory 1Use the BANK button or the number buttons to select the bank. • If you do not perform any operation for about five seconds after pressing the BANK button, the digital piano automatically clears the registration memory recall screen. 2Press the REGISTRATION button (1 to 4) or number buttons for the area whose setup you want to recall. • The setup name along with the message “Recall” appears on the display. NOTE • If you press a REGISTRATION button without using the BANK button to select a bank first, the last bank number selected is used. Ba1- kn Re1-2 a l l c REGISTRATION STORE BANK Number buttons Song Memory Function This digital piano lets you record up to five separate songs in song memory for later playback. There are two methods you can use to record a song: real-time recording where you record the notes as you play them on the keyboard, and step recording where you input chords and notes one-by-one. NOTE • Layer and split cannot be used while standing by for recording or while recording is being performed in the Song Memory Mode. Also, layer and split are automatically turned off whenever the digital piano goes into record standby or starts recording. Tracks Digital piano song memory records and plays back much like a standard tape recorder. There are a total of six tracks, each of which can be recorded separately. Besides notes, each track can have its own tone number. Then when you play back the tracks together, it sounds like an entire six-piece band. During playback, you can adjust the tempo to change the speed of playback. Start End Auto accompaniment (Rhythm, Track 1 Bass, Chord 1/2/3), Keyboard play Track 2 Keyboard play Track 3 Keyboard play Track 4 Keyboard play Track 5 Keyboard play Track 6 Keyboard play Melody data recorded in track. NOTE • With this digital piano, Track 1 is the basic track, which can be used to record keyboard play, along with Auto Accompaniment. Tracks 2 through 6 can be used for keyboard play, so they are called melody tracks. Tracks 2 through 6 are used to add other parts to what is recorded in Track 1. • Note that each track is independent of the others. This means that even if you make a mistake while recording, you only need to re-record the track where the mistake was made. • You can use different Mixer settings for each track (page E-39). Selecting a Track Use the SONG MEMORY TRACK buttons marked CHORD/ TR1 through TR6 to select the track you want. Song Memory Track Buttons Track 4 Track 1 Track 5 Track 6 Track 2 Track 3 Basic Song Memory operations The status of the Song Memory changes each time you press the SONG MEMORY button. StS g 0 p ceRe ReS g 0 o r d c PlS g 0 ya Normal Playback Real-time Recording Step Recording Flash Lit Song Memory Function Using Real-time Recording With real-time recording, the notes you play on the keyboard are recorded as you play them. To record with real-time recording 1Press the SONG MEMORY button twice to enter real-time record standby. • Perform step 2, below, within five seconds after entering record standby. • The level meters for tracks 11 through 16 are shown on the display while the digital piano is in record standby, so you can easily check which tracks are already recorded. See “Level Meter Contents During Record/Edit Standby” on page E-58 for details. 2Use the number buttons to select a song number (0 to 4). • The above song number screen remains on the display for about five seconds. If it disappears before you have a chance to select a song number, use the [] CURSOR button to re-display it. 3Make the following settings. • Tone number • Rhythm number • Tempo • MODE button 4Press the START/STOP button to start recording. • When recording starts, the REC indicator flashes on the display. After a few moments the indicator stops flashing, and remains on the display. • Real-time recording without a rhythm starts. If you want to record with a rhythm, press the INTRO/ ENDING 1/2 or VARIATION/FILL-IN 1/2. 5Play something on the keyboard. • You can also record Auto Accompaniment chords by selecting the applicable mode with the MODE button. • The pedal and pitch bend operations are also recorded. See “Track 1 Contents After Real-time Recording” on page E-53 for details. 6Press the START/STOP button to end recording when you are finish playing. • If you make a mistake while recording, you can stop the record operation and begin over again from step 1, or you can use the editing function (page E-60) to make corrections. NOTE • Using real-time recording to record to a track that already contains recorded data replaces the previous recording with the new one. Song number ReS g 1 o r d c S...
Otros modelos de este manual:Instrumentos Musicales - 575E1A (2.8 mb)