Votos - 4, Puntuación media: 4.5 ( )

Fabricar: Roland Tamaño del archivo: 2.8 mb Nombre del archivo: Idioma del manual:

You may prefer to use headphones, so you do not need to be concerned about those around you (especially when it is late at night). 558d • This instrument is designed to minimize the extraneous sounds produced when it’s played. However, since sound vibrations can be transmitted through floors and walls to a greater degree than expected, take care not to allow these sounds to become a nuisance to neighbors, especially when performing at night and when using headphones. 559a • When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials. add • The snare stand is supported by means of a tripod. When installing the drum set, make sure the legs of the tripod are opened wide enough to keep the equipment from falling over. add • The rubber portion is treated with a preservative to maintain its performance. With the passage of time, this preservative may appear on the surface as a white stain, or reveal how the pads were struck during product testing. This does not affect the performance or functionality of the product, and you may continue using it with confidence. Add • Do not insert your hands or fingers in the locations marked by the arrows. Otherwise, you risk injury and possible damage to this unit’s parts. Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 2) and “IMPORTANT NOTES” (p. 3). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2009 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. • Snare/tom pad with mesh head allowing for excellent feel, dynamics and low level acoustics sound. • Rim shots and playing with brushes is possible. • The pad can mount on a V-Drums drum stand and/or commercially available tom stands (vertical rod type or horizontal pipe type p. 5) (PD-125X/105X only). • You can easily change the shell covering to personalize the kit’s look. Main Features • The only difference between the PD-125X and PD-105X is their diameter. • The PD-125XS has no bracket as it’s designed for use with a snare stand. PD-125XS/125X/105X Components • Applying excessive force to the sensor located under the head can damage it. • Due to the nature of the materials used in the sensor, changes in temperature or humidity may affect playing dynamics or sensor sensitivity. Mounting the Pads The PD-125XS (dedicated snare pad) has no mounting bracket so can only be used with a snare stand. Make sure that the snare stand you are using is able to support a 12-inch shell. Mounting the PD-125XS (Dedicated Snare Pad) The PD-125X/105X can be attached to a stand that has either a vertical rod or a horizontal pipe. Stand with vertical rod (MDS series) fig.03-j.epsfig Stand with horizontal pipe fig.03-j.epsfig Mounting the PD-125X or 105X on a Tom Stand It was already mentioned that mounting a PD-125XS requires a snare stand that can support a 12-inch shell. For the PD-105X, the stand must support a 10-inch shell. Tighten the knob that fastens bracket securely to assure the best functionality. Mounting the PD-125X or 105X on a Snare Stand Use the included stereo cables to connect pads to your percussion sound module (sold separately). Connect the L-shaped end of the cable to the pad’s OUTPUT jack. Using a monaural cable will NOT allow rim shots or positional sensing. Refer to the table below for details on trigger inputs of sound modules supporting rim shots. Prevent malfunction and/or damage to speakers or other devices by always turning down the volume, and/ or power of all devices before making any connections. Connecting to the Percussion Sound Module Compatibility with various sound modules Trigger Parameter Settings on the Sound Module For details, refer to the owner’s manual of your percussion sound module. Recommended parameter settings Below please find recommended trigger parameter settings when using the PD-125XS/125X/105X with various sound modules. Further trigger parameter adjustment may be needed depending on the way in which the PD-125XS/125X/105X is mounted or the playing environment. For details on editing refer to the owner’s manual of your sound module. Head Shot Rim Shot Cross Stick Positional Sensing Rim Shot Nuance Brush Sweep TD-20X/ TDW-20/ TD-20 o o o o o o TD-12 o o o o o o TD-9 o o o x x x TD-4 o o o x x x TD-20X/TDW-20/TD-20 Model name Trigger type PD-125XS PD125 PD-125X PD125 PD-105X PD105 . Inputs that allow rim shots: 2 SNARE, 3–6 TOM 1–4, 12–15 AUX 1–4 . Inputs that allow cross-stick: 2 SNARE . Inputs that allow positional sensing: 2 SNARE TD-12 Model name Trigge...

Descargar ahora

Introduzca dos números de la imagen: