Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
2 Select the FAT REFORM action and press the .. key 3 Press ENTER. A popup message reminds you that all data on the FAT partition will be lost. 4 Press ENTER to reformat the FAT partition. Automatic song creation After formatting a disk or a partition, a new song is always created on any blank partition, in the same way that one is created if the only song on a partition is erased. You always have a song available to work with. Advanced song management 42 TASCAM DP-01 Owner’s Manual Advanced techniques Advanced song management Copying songs The DP-01 disk is divided into “partitions” (see “Disk management” on page 40). You can use different partitions for different purposes: old songs/new songs, or instrumentals/vocal numbers, for example. You can also use the multiple selection procedure described in “Erasing many songs at one time” on page 22 to copy many songs at once. This function allows you to copy a song to another partition. 1 From the SONG menu, select the COPY action: 2 Highlight a song and press ENTER. When the DP-01 leaves the factory, the disk has three “native” partitions. 3 Use the jog wheel to select the “target” partition that the song will be copied to. As you scroll through the partitions, you will see the available free space figure change, so you will always know if there is enough space for the song. 4 Press ENTER when you’ve selected the target partition. You are asked if you want to copy the song (Are you sure?). Press ENTER to copy the song, or EXIT to cancel the operation. 5 The DP-01 then provides you with a progress report as it carries out the copying operation. When it is finished, you see the copy screen again. Deleting unused data This operation cannot be undone. Only do it if you are sure you do not want the unused parts. Because a DP-01 song is not just the parts you hear, but possibly unused audio parts (see “About track editing” on page 50), there may be parts which have been cut out or that you want to delete so you don't waste hard disk space. You can delete the unused data from the currentlyloaded song. 1 From the SONG menu, select the DEL/UNUSED action: 2 Press ENTER to delete the unused data, or EXIT to cancel the operation. Advanced techniques Protecting a song When a song is protected, it cannot be edited, and further recording is not possible. Of course, it cannot be erased, either. From the SONG menu, select the PROTECT action: 2 Use the wheel to change protection from OFF to ON and press ENTER. • In lists of songs for copying, deletion, etc., a “key” icon ( ) appears beside any protected song. • If you try to do an action which cannot be performed on a protected song, a message appears (Song Protected). • Unprotect a song by following the steps above, but changing ON to OFF. Advanced management TASCAM DP-01 Owner’s Manual 43 Using the USB connection 44 TASCAM DP-01 Owner’s Manual Advanced techniques Using the USB connection We use the term “PC” throughout this section to mean either a Windows or Macintosh personal computer. You can use a personal computer to read and write from the FAT partition of the hard disk. Data transfer between a personal computer and the DP01 is always done through this FAT partition. You cannot access “native” partitions from a computer, so performing data transfer functions is a twostage process. Do not rename or delete these directories— if you do, you will lose the ability to carry out the operations described here. Within the FAT partition, there are three directories (folders): BACKUP, WAVE and UTILITY, as explained below. You can make the following transfers: .. Whole songs—the DP-01 calls this BACKUP (from the DP-01 to the BACKUP directory of the FAT partition to the PC) and RESTORE (from the PC to the BACKUP directory of the FAT partition of the DP-01). .. Tracks in WAV format—tracks can be exported (one or more at a time) as WAV files, or imported (one at a time) from WAV files between the PC and the WAVE directory of the FAT partition of the DP-01. The UTILITY directory is used for DP- 01 system updates, etc. Explanations of how this is used are given with the update software. .. Mastered stereo mixes—export only, as stereo WAV files to the WAVE directory of the FAT partition of the DP-01. System requirements Data transfer between the DP-01 and a PC takes place at USB 2.0 speeds (maximum). If your computer has USB 1.1, but no USB 2.0, data transfer will still work, but the USB 1.1 rate. We recommend that you always use a high-quality USB 2.0 cable in order to maximize data transfer speeds. The DP01 will work with the following Microsoft operating systems: Win dows ME, Windows 2000, and Windows XP. It will also work with the fol lowing operating systems from Apple Computer: MacOS 9.0 and above, and MacOS X 10.2 and above. For all the above operating systems, no driver is required. The DP01 sim ply appears as a removable disk. However, you should always follow your computer’s instructions on how to disconnect a USB removable dri...
Otros modelos de este manual:Instrumentos Musicales - D00871320A (5.15 mb)