Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
This means that the same parameter number can be assigned different functions by some manufacturers. Therefore, the device which receives this message may not operate as expected. 2nd byte 3rd bvte 05H vvH MIDI Implementation Tone Modify NRPN MSB LSB Data Entry 01H 20H 01H 21H 01H 64H 15H rrH 16H rrH TVF Cutoff Frequency mm: 0EH-40H-72H (-50 - 0 - +50) TVF Resonance mm:0EH-40H-72H (-50 - 0 - +50) TVF & TVA Envelope Decay Time mm: 0EH-40H-72H (-50 - 0 - +50) Drum Instrument TVF Cutoff Frequency rr: Note number of Drum Instrument mm: 0EH-40H-72H (-50 - 0 - +50) Drum Instrument TVF Resonance rr: Note number of Drum Instrument mm: 0EH-40H-72H (-50 - 0 - +50) Drum Instrument TVF & TVA Envelope Decay Time rr: Note number of Drum Instrument mm: 0EH^0H-72H (-50 - 0 - +50) Program Change This message is transmitted when the "MIDI Program change switch" of the MIDI mode is set at ON. Status CnH 2nd byte ppH n=MIDI channel : pp=Program number : 0H-FH (ch.l-ch.16) QÖH-7FH (prog.0-prog.127) The Program change will be transmitted on the Drum part MIDI channel if the Drum kit is changed. System Exclusive Message Status FOH Data byte iiH, ddH,eeH Status F7H FOH: ii==ID Number : dd,..., ee=Data : F7H : System Exclusive 41=Roland 7E=Universal Non-Realtime Message 7F=Universal Realtime Message Ö0H-7FH (0-127) EOX (End Of Exclusive) With the DR-202, the System Exclusive Messages can be used to transmit Bulk Dump of Kit data, Song/Pattern data and MIDI/Utility data. For details refer to "4. Exclusive Communications," on page 85. ■ System Common Message If the "Sync" of the MIDI mode is set at "MIDI", this message is never transmitted. • Song Position Pointer Status F2H 2nd byte 3rd bvte 11H mmH mm, 11 =Value : 00H, OOH-7F, 7FH (0-16383) * Transmitted when the "Step" is changed in the Song mode. • Song Select Status F3H 2nd byte ssH ss=Song number : 00H-12H (0-18) Transmitted in one of the following operations: When the Song mode has been selected. When the song has been selected in the Song mode. System Realtime Message If the "Sync" of the MIDI mode is set at "MIDI", this message is never transmitted. The Timing clock Ls transmitted even if no songs are played. I Timing Clock Status F8H • If the "Sync" of the MIDI mode is set at "MIDI", this message is never transmitted. • Start Status FAH • Continue Status FBH • Stop Status FCH • Active Sensing Status FEH • Transmitted for checking MIDI connections between the DR-202 and external device. 2. RECOGNIZED DATA ■ Channel Voice Message • Note Off Status 2nd byte 8nH kkH 9nli kkH n=MIDI channel : kk=Note number : vv=Velocity : 3rd bvte vvH 00H 0H-FH (ch.l-ch.16) 00H-7FH (0-127) 00H-7FH (0-127) The Velocity is always ignored. This message received on the channel of Drum Part is Ignored. i Note on Status 9nH 2nd bvte 3rd bvte kkH vvH n=MIDI channel : kk=Note number : vv=Velocity : 0H-FH (ch.l-ch,16) 00H-7FH (0-127) 01H-7FH (1-127) Pad Note Number Pad Note Number KICK1 36 (24H) ROLL KICK 1 100 (64H) KICK 2 35 (23H) ROLL KICK 2 101 (65H) SNARE 1 38 (26H) ROLL SNARE 1 102 (66H) SNARE 2 40 (28H) ROLL SNARE 2 103 (67H) CLOSE H 42 (2AH) ROLL CLOSE H 104 (68H) OPENH 46 (2EH) ROLL OPENH 105 (69H) НГГ1 50 (32H) ROLL НГГ1 106 (6AH) RIDE 51 (33H) ROLL RIDE 107 (6BH) НГГ2 47 (2FH) ROLL HIT 2 108 (6CH) CRASH 49 (31H) ROLL CRASH 109 (6DH) HIT3 43 (2BH) ROLL HIT 3 110 (6EH) PERC1 60 (3CH) ROLL PERC 1 111 (6FH) PERC2 61 (3DH) ROLL PERC 2 112 (70H) 81 MIDI Implementation • Control Change O Bank Select This message is received when the "MIDI Program change switch" of the MIDI mode is set at ON. 2nd bvte 00H 20H 3rd byte mmH HH n=MIDI channel: OH-FH (ch.l-ch.16) mm^Bank number (MSB): 00H-7FH (0-127) U=Bank number (LSB): 00H-7FH (0-127) * Channel number can be received on the channel set in the Drum part. * The Drum kit set corresponding to each Bank Select are as follows. * Will not be affected by the received Bank number (LSB). Bank Select MSB LSB Progaram No Drum Kit 81 85 00 00 0-127 0-63 Preset 0-127 User 0-63 O Modulation This message is received when the "MIDI Control change switch" of the MIDI mode is set at ON. Status BnH 2nd byte 3rd bvte 01H vvH n=MIDI channel : OH-FH (ch.l-ch.16) vv=Modulation depth : 00H-7FH (0-127) ◦ Expression This message is received when the "MIDI Expression switch" of the MIDI mode is set at ON. Status 2nd byte 3rd byte BnH 0BH vvH n=MIDI channel : vv=Expression : OH-FH (ch.l-ch.16) 00H-7FH (0-127) O Portamento This message is received when the "MIDI Control change switch" of the MIDI mode is set at ON. Status BnH 2nd byte 3rd byte 41H vvH n-MIDI channel : vv=Control value: OH-FH (ch.l-ch.16) 00H-7FH (0-127) O-63-OFF 64-127=ON Status BnH 2nd byte 3rd byte 05H vvH n=MIDI channel : vv=Portamento time : OH-FH (ch.l-ch.16) 00H-7FH (0-127) * Adjusts the speed of the pitch change when Portamento is on or when P...