Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
2. Press the / button to select the number of the phrase to be played back. The MIDI/CLIP indicator lights up when a MIDI phrase is selected. lit * The non-recording phrase number in display is flashed. 3. Press the PLAY button and the phrase will playback. While playback is in progress, the PLAY indicator lights, and a dot flashes in the display. 4. Press the Stop button to end playback. Playback Using Control Input and Other Input You can play back control input and other input in the same manner as you would with audio phrases. Applications 27 Controlling the AR-200 from an ExternalDevice (Control Input Connectors) You can use the control input and DC input screw terminals (CONT A) and the 25-pin D-sub-type control I/O connector (CONT B) on the AR-200’s rear panel to control the AR-200 from an external device. This chapter explains how to connect external devices and make the settings for the AR-200. What Is No-voltage/Makecontact? This is contact that makes starting possible simply by connecting two lines to the control input connectors and shorting their ends. This is a general-use method that lets you create start systems easily using only a switch and without any need for a power source, enabling easy use for a variety of applications. You can control playback and recording with the AR-200 using On/Off signals from No-voltage/Make-contact input from an external source. By connecting infrared sensors or switches, relays, and timers, or other external starting connectors to the AR-200, you can use the unit in an even wider variety of applications. The AR-200 can help simplify installation operations by making the starting-side contact hot and sharing the ground as the common connector. For more on the control input specifications, refer to "Control I/O Connector specifications" (p. 57) in the Appendices. Important Note on Using the Control I/O Connector The control I/O connector cannot be used to switch the power to the AR unit on or off. When making connections to the ports, be careful not to lose the removed screws. Place the screws out of the reach of small children. If a screw is accidentally swallowed, immediately consult a physician. Types of Control Input Playback There are four types of control input playback: Playback by Card Data (p. 28), Direct Playback (Reverse Priority) (p. 30), Binary Playback (p. 31), and Interval Playback (p. 34). * You cannot use more than one type of playback at the same time. Operational Specifications for Control Input Playback When new control signals are input during playback of a phrase When control signals are input continuously Direct Playback (Nomal) A phrase in progress is stopped, and playback of another specified phrase is begun only when the control signal being input is of a higher priority than that of the phrase currently being played back Repeated Direct Playback (Reverse Priority) Playback stopped, followed byplayback of the specified phrase Repeated Interval Playback Playback stopped, followed byplayback of the specified phrase Repeated Binary Playback Disabled Repeated Types of Control Input Recording The AR-200 features one type of control input recording, "Terminal Rec "(p. 34). Playback By Card Data Cards Created on the AR-3000, AR-2000, or AR-1 Playback will use the settings (playback method) recorded in the card. For more information, please refer to the owner’s manuals for each device. * Some functions are not available. (p. 55) Card made on the AR-100/200 Playback mode is available Direct Playback(Normal). Phrases 1 through 9 are assigned to the control I/O connector Port Nos. 1 through 9. Direct playback(Normal playback) A phrase is played back when a control signal is input directly to the terminal with the number to which the phrase is assigned. Up to 9 phrases can be played back.Assign Phrases 1 through 9 beforehand to Port Nos. 1 through 9, respectively. This makes it very convenient when you want to specify a desired phrase directly using a switch, relay, sensor, or other such means. A Control Signal A Control Signal A Control Signal A Control Signal A Control Signal A Control Signal Port No. 1 2 3 4 5 9 Phrase 0001 0002 0003 0004 0005 0009 Controlling the AR-200 from an External Device (Control Input Connectors) Connectors Used for Direct Play (Control I/O Connector) “1–9”: Inputting a control signal directly to the terminal with the number corresponding to the phrase starts playback of the phrase. “10 (Stop)”: This stops phrase playback. In addition to the connectors just described, shorting “11/12 (GND)” (ground) connectors enables “On.” 10 1 Select a Phrase 9 STOP 12 11 GND "Important Notes on Making Connections and Switching the Power On and Off" (p. 9) Basic Operation of Direct Playback (Normal Playback) 0002 AUDIO OUTPUT Port NO. 1 Port NO. 2 STOP Port 0001 0001 Interrupted Playback: Input a control signal to a Port, 1–9. > The phrase assigned to the Port is played back. stopping: Input a control signal to Port 10 (STOP). > Playb...