Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
vvH Value for the parameter. pp=0 Reverb Type vv = 00H Small Room vv = 01H Medium Room vv = 02H Large Room vv = 03H Medium Hall vv = 04H Large Hall vv = 08H Plate pp=1 Reverb Time vv = 00H - 7FH 0 - 127 F7H EOX (End of Exclusive) MIDI Implementation MIDI Implementation Controller [GM2] .Data transmission Status Data byte Status F0H 7FH, 7FH, 09H, 03H, 0nH, ccH, ppH, rrH F7H Byte Explanation F0H Exclusive status 7FH ID number (universal realtime message) 7FH Device ID (Broadcast) 09H Sub ID#1 (Controller Destination Setting) 03H Sub ID#2 (Control Change) 0nH MIDI Channel (00 - 0F) ccH Controller number (01 - 1F, 40 - 5F) ppH Controlled parameter rrH Controlled range pp=0 Pitch Control rr = 28H - 58H -24 - +24 [semitones] pp=1 Filter Cutoff Control rr = 00H - 7FH -9600 - +9450 [cents] pp=2 Amplitude Control rr = 00H - 7FH 0 - 200% pp=3 LFO Pitch Depth rr = 00H - 7FH 0 - 600 [cents] pp=4 LFO Filter Depth rr = 00H - 7FH 0 - 2400 [cents] pp=5 LFO Amplitude Depth rr = 00H - 7FH 0 - 100% F7H EOX (End of Exclusive) .Scale/Octave Tuning Adjust [GM2] Status Data byte Status F0H 7EH, 7FH, 08H, 08H, ffH, ggH, hhH, ssH... F7H Byte Explanation F0H Exclusive status 7EH ID number (Universal Non-realtime Message) 7FH Device ID (Broadcast) 08H Sub ID#1 (MIDI Tuning Standard) 08H Sub ID#2 (scale/octave tuning 1-byte form) ffH Channel/Option byte 1 bits 0 to 1 = channel 15 to 16 bit 2 to 6 = Undefined ggH Channel byte 2 bits 0 to 6 = channel 8 to 14 hhH Channel byte 3 bits 0 to 6 = channel 1 to 7 ssH 12 byte tuning offset of 12 semitones from C to B 00H = -64 [cents] 40H = 0 [cents] (equal temperament) 7FH = +63 [cents] F7H EOX (End of Exclusive) .Key-based Instrument Controllers [GM2] Status Data byte Status F0H 7FH, 7FH, 0AH, 01H, 0nH, kkH, nnH, vvH F7H Byte Explanation F0H Exclusive status 7FH ID number (universal realtime message) 7FH Device ID (Broadcast) 0AH Sub ID#1 (Key-Based Instrument Control) 01H Sub ID#2 (Controller) 0nH MIDI Channel (00 - 0F) kkH Key Number nnH Control Number vvH Value nn=07H Level vv = 00H - 7FH 0 - 200% (Relative) nn=0AH Pan vv = 00H - 7FH Left - Right (Absolute) nn=5BH Reverb Send vv = 00H - 7FH 0 - 127 (Absolute) nn=5D Chorus Send vv = 00H - 7FH 0 - 127 (Absolute) :: F7 EOX (End of Exclusive) ATELIER can receive the various parameters using System Exclusive messages. The exclusive message of GS format data has a model ID of 42H and a device ID of 10H (17), and it is common to all the GS devices. When keyboard part in MIDI-IN Mode: Mode-2, the exclusive message has a model ID of 62H and a device ID of 10H (17). .Data set 1 DT1 This is the message that actually performs data transmission, and is used when you wish to transmit the data. Status Data byte Status F0H 41H, 10H, iiH, 12H, aaH, bbH, ccH, ddH, ... eeH, sum F7H Byte Explanation F0H Exclusive status 41H ID number (Roland) 10H Device ID iiH Model ID (GS part: 42H, Keyboard part: 62H) 12H Command ID (DT1) aaH Address MSB: upper byte of the starting address of the transmitted data bbH Address: middle byte of the starting address of the transmitted data ccH Address LSB: lower byte of the starting address of the transmitted data ddH Data: the actual data to be transmitted. Multiple bytes of data are transmitted starting from the address. :: :: eeH Data sum Checksum F7H EOX (End of Exclusive) * The amount of data that can be transmitted at one time depends on the type of data, and data can be received only from the specified starting address and size. Refer to the Address and Size given in Section 5 (p. 12). * Data larger than 128 bytes must be divided into packets of 128 bytes or less. If “Data Set 1” is transmitted successively, there must be an interval of at least 40 ms between packets. * Regarding the checksum please refer to section 6 (p. 20). * This parameter affects drum instruments only. MIDI Implementation MIDI Implementation Transmit data Arranger and composer data can not be transmitted. ¦ Channel Voice Messages .Note off Status 2nd byte 3rd byte 8nH kkH 40H n = MIDI channel number: 0H-FH (ch.1-ch.16) kk = note number: 1CH-67H (28-103) (AT-900/900C/800) 21H-60H (33-96) (AT-500/350C) 24H-60H (36-96) (AT-300/100/75) * When the transpose is set to 0. * Note off message is sent out with the velocity of 40H. .Note on Status 2nd bytes 3rd byte 9nH kkH vvH n = MIDI channel number: 0H-FH (ch.1-ch.16) kk = note number: 1CH-67H (28-103) (AT-900/900C/800) 21H-60H (33-96) (AT-500/350C) 24H-60H (36-96) (AT-300/100/75) * When the transpose is set to 0. vv = note on velocity: 05H-7FH (5-127) .Control Change .Bank Select (Controller number 0, 32) Status 2nd bytes 3rd byte BnH 00H mmH BnH 20H llH n = MIDI channel number: 0H-FH (ch.1-ch.16) Initial Value = FH (ch.16) mm, ll = Bank number: 00 00H - 7F 7FH (bank.1-bank.16384) * The bank select number stored in the registration will be transmitted on the control channel. .Volume (Controller number 7) Status 2nd bytes 3rd byte BnH 07H vvH n = MIDI channel number: FH (ch.16) vv = Control value: 00H-7FH (0...
Otros modelos de este manual:Instrumentos Musicales - AT-800 (604.92 kb)