Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
The Record button will also flash red. Push PLAY. The Record indicator and Track Status Select buttons now glow red steadily and recording begins. Punch In recording is also possible by first pressing PLAY, then triggering the RECORD button at the desired punch in point: Push the Track Status Select buttons so they flash red. Push PLAY. The Project will playback. The track buttons will continue to flash. Push RECORD. The Track Status Select buttons now glow red steadily and recording begins. AUTO This mode is for automated Punch In and Out. Pressing RECORD then PLAY starts playback at the programmed Start Time. At the programmed Punch In time, the DM-80 will punch into record. At the Punch Out time, it will punch back out. When the End Time is reached the DM-80 will stop. The Start, In, Out, and End times are set in the punch time window — press EXIT to go back to the Record window, then press PUNCH (F2). REHEARSAL When Record Monitor (see below) is set to Disk, you can rehearse a punch in by pressing PLAY. Playback will start at the programmed Start Time. At the programmed Punch In time, the DM-80 will not punch in, but will switch to monitor the input. At the Punch Out time, it will switch the monitor back to the disk. When the End Time is reached the DM-80 will stop. 38 ROLAND DM-80-R • OWNERS MANUAL LOOP Loop Mode repeats a section of the Project over and over. When Record Monitor (see below) is set to Disk, you can rehearse, make a recording and listen back to it, all without stopping. Use the Track Status Select buttons to set which tracks will be recorded. Pressing PLAY starts playback. When the End Time is reached the DM-80 will jump back to the Start Time and resume playback, without stopping. Loop Recording Punch Out j End Time Recording J You can enter Record on any repetition by pressing REC anytime before reaching the Punch In point. At the Punch In point the DM-80 will punch into record. At the Punch Out time, it will punch back out. When the End Time is reached, the DM-80 will jump back to the Start Time and playback. A message screen will appear, asking if you would like to keep the recording you have just made. While the message is displayed, the DM-80 will continue to loop and playback the recording. Press KEEP (FI) to keep the recording, press DELETE (F2) to discard it. After pressing KEEP or DELETE, the DM-80 will return to rehearsal mode—it plays back and switches to input during the Punch In point. Hint: You can save the Take and record another by pressing REC instead of KEEP. The DM-80 will keep the lost Take/Phrase and punch in again. The exciting part about loop recording is: each recording can be saved as a different take on the disk! This way you can record a part again and again, then listen back to all the recordings to find the best one. You can choose whether to keep each take as you record it. Of course, the latest take will be inserted into the Project. RECORD MONITOR This controls the input-output switching during Record and Record Waiting modes. SOURCE When a track is placed in Record Ready—and the Track Status Select Red LED is flashing—the input source will be monitored. Use this mode if you want to play along until a punch in. DISK The track will playback from disk at all times except when actually recording and the Track Status Select red LED is lit. Use this mode if you want to hear other recordings on the track, for example, to manually punch in at a specific point. MIDI TRIGGER You can punch in and out using a MIDI pedal set to Continuous Controller #4. The Pedal operates like the REC key—pedal down = Record on, pedal down again = Record off. The MIDI channel used is the MIDI Control Channel, set in the System 2 page—press SYSTEM, PAGE(F5). SOFTWARE FUNCTIONS 39 PUNCH TIME (FZ) Start Tine- 00:00:00:00.0 M= 1 B= 1 Punch In .. 00:00:13:10.0 M= 7 B= l Punch Out . 00:01:27:00.0 M= 45 B= 3+ End Tine . .......M=..............4.6.......B.=1 The automated punch timings for Auto and Loop recording are set in this window. Pressing RECORD and PLAY (in either order) starts playback at the programmed Start Time. At the programmed Punch In time, the DM-80 will punch into record. At the Punch Out time, it will punch back out. When the End Time is reached the DM-80 will stop (in Auto mode) or loop back to Start Time (in Loop mode). RI/0UTASSKN(F3) I npüt. 'OUt F Ut HSS i 3n In out flux In Out 5:Rec-L Mix 1L:In-5 Mix 6:Rec-R Mix 1R:ln-6 Mix ?:DsB-L Pre 2L:Dsfl-L Rec Pre 2R:D9fi-R Rec HBIMÜ This page is the DM-80's Patch Bay. Inputs can be patched to the desired outputs for recording or remix. Each of the tracks and mixer's Aux channels can be patched. The input sources are: The eight analog inputs (ln-1—ln-8) The digital inputs (DgA-L, DgA-R, DgB-L, DgB-R) The output of the mixer itself (RecL, RecR) The output destinations are: The Mixer (Mix), for mix to the stereo Mix Outputs. The corresponding Direct Output 1-8, Pre-fader ...