Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
115(remainder) checksum = 128 -11 ¿(remainder) = 13 = 0DH This means that F0 41 10 42 12 40 01 30 02 0D F7 is the message we transmit. «Example 2> Requesting transmission of the LEVEL for DRUM MAP 1 NOTE NUMBER 75 (D#5; Claves) NOTE NUMBER 75(D#5) is 4BH in hexadecimal. According to the "Parameter Address Map", LEVEL of NOTE NUMBER 75 (D#5; Claves) in DRUM MAP 1 has an Address of 41 02 4BH and a Size of 00 00 01H. Thus, «Example 1> Set the tuning of MIDI channel 3 to A4 = 442.0Hz Send RPN#1 to MIDI channel 3. From the above table, the value is 45 03H. B2 64 00 MIDI ch.3, lower byte of RPN parameter number (B2) 65 01 (MIDI ch.3) upper byte of RPN parameter number (B2) 06 45 (MIDI ch.3) upper byte of value (B2) 26 03 (MIDI ch.3) lower byte of value (B2) 64 7F (MIDI ch.3) upper byte of RPN parameter number (B2) 65 7F (MIDI ch.3) lower byte of RPN parameter number :00H :01H :45H :03H :7FH :7FH «Example 2> Set the tuning of the entire device to +23.4 cent From the "Parameter Address Map", the MASTER TUNE Address is 40 00 00H. The value is expressed nibbled in steps of 0.1 cent with 00 04 00 00H (= 1024) as 10, so +23.4 cent would be 234 + 1024 = 1258, and when this is nibbled it would be 00 04 0E 0AH. ESL 11 (1) (2) 11 ) E::cl usive Stati (4)Mode1 ID (GS1 (2)ID (Roland) (E)Command ID (RQ1) (3)Device ID (17 (6)End cf Exclus (1)Exclusive St (4¡Model ID (GS (2¡ID (Roland) (5)Command ID (DTI) Next we calculate the checksum. 41H + 02H + 4BH + ООН + ООН + 01H =65 + 2 + 75 + 0 + 0 + 1 = 143(sum) 143(sum) + 128 = 1 (quotient)... I5(remainder) checksum = 128 -1 ¿(remainder) = 113 = 71H This means that F0 41 10 42 11 41 02 4B 00 00 01 71 F7 is the message we transmit. Next we calculate the checksum. 40H + OOH + 00H + OOH + 04H + 0EH + 0AH = 64 + 0 + 0 + 0 + 4 + 14 + 10 = 92(sum) 92(sum) + 128 = O(quotient)... 92(remainder) checksum = 128 - 92(remainder) = 36 = 24H This means that F0 41 10 42 12 40 00 00 00 04 0E 0A 24 F7 is the message we transmit. E-96 MIDI Implementation 17 MIDI IMPLEMENTATION CHART [Intelligent Synthesizer] (Arranger) Date: 2 May 1995 Model: E-96 Version: 1.00 Function... Transmitted Recognized Remarks 1=- Acc1, 2= A Bass. 3= Acc2 4= Upperl. Basic Default 1 ~ 12, 14, 16 1-16 5= Acc3, 6= Upper2, 7= Acc4. 8= Acc5, 9= Acc6, 10= A Drums/Stl PG, 11= Lower, Channel Changed 146, Off 1-16, Off 12= Man Bass, 13=Rx1/Basic MIDI Ch.. 14= Rx2 / NTA1. 15= Rx 3 / NTA2, 16= M Drum. Default Mode 3 Mode 3 Mode Message Altered Mode 3, 4 (M—1.) Mode 3, 4 (M=1) *2 Note 0-127 *1 0-127 *1 Number True Voice ***** 0-127 Velocity Note ON Note OFF 0 X *1 0 X After Key’s X О Touch Ch’s X 0 Pitch Bend 0 *1 0 *1 0,32 0 0 Bank Select 1 0 0 *1 Modulation 5 0 0 Portamento Time 6, 38 0 0 Data Entry 7 0 0 Volume 10 0 0 Panpot 11 0 0 Expression 64 0 0 Hold 1 Control 65 0 о Portamento Change 66 X О Sostenuto 67 X О Soft 84 0 О *■} Portamento Control 91 0 О (Reverb) Effect 1 Depth 93 0 *1 О (Chorus) Effect 3 Depth 98, 99 0 О NRPN LSB. MSB 100, 101 0 О RPN LSB, MSB 120 X О All Sound Off 121 X О Reset All Controllers Program Change True # 0 *1 О 0-127 *1 Program Number 1-128 System Exclusive 0 О System Common Song Pos Song Sei Tune X X X X X X System Real Time Clock Commands 0 0 *1 *1 о О *1 *1 MIDI File Record/Play Local On/Off 0 ‘1 О Aux All Notes Off X 0(123-125) Messages Active Sense Reset 0 X О X *1 О X is selectable Notes *2 Recognized as M: =1 even if M*1 Mode 1 : OMNI ON, POLY Mode 2: OMNI ON, MONO 0: Yes Mode 3: OMNI OFF, POLY Mode 4: OMNI OFF. MONO X: No 18 E-96 MIDI Implementation ■ MIDI implementation (Sound Module, Keyboard Section, SMF Player) Model E-96 Version 1.00 '95.5 The E-96 has additional functions and parameters which were not found on previous GS format sound sources. These functions and parameters are marked as [96] If MIDI messages marked as [96] are transmitted to a different GS format sound source, it is possible that these messages may not be received. Section 1. Receive data ■ Channel voice messages • Note off Status 2nd byte 3rd bvte 8nH kkH vvH 9nH kkH 00H n=MIDI channel number kk=note number vv=velocity OH - FH (ch.1 - ch.16) 00H-7FH (0-127) ООН - 7FH (0 - 127) * Not received when Rx.NOTE MESSAGE = OFF (Initial value is ON) or when note number is outside limits. * The velocity values of Note Off messages are ignored. * Note on Status 2nd bvte 3rd bvte 9nH kkH vvH n=MID! channel number kk=note number vv=velocity OH - FH (ch.1 - ch.16) 00H-7FH (0-127) 01H - 7FH (1 -127) * Not received when Rx.NOTE MESSAGE = OFF (Initial value is ON) or when note number is outside limits. * For Drum Parts, not received when Rx.NOTE ON = OFF for each Instrument. * Polyphonic Key Pressure Status 2nd bvte 3rd bvte AnH kkH vvH n=MIDI channel number kk=note number vv=value OH - FH (ch.1 - ch.16) 00H-7FH (0- 127) 00H-7FH...