Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
The FR-2/FR-2b contains 2 digital effects: Reverb: This effect creates the impression that you are playing in a concert hall, a church or a room. It adds “depth” to the sound. Chorus: This effect creates the impression that several instruments of the same type are playing at the same time. You can change the type and the level settings of these two effects (see p. 19). Those settings apply to all sections and all Sets. Bass section The buttons in this section allow you to play both bass notes and chords. The chords use the (sound) register selected for the Bass section – hence the name of this section. The “real” bass notes are assigned to the two highlighted rows. The remaining buttons are used to play chords. At the factory, three caps are installed on the black buttons in the following illustration. Feel free to remove them and to slide them over other buttons if that feels more comfortable. Bb3 F3 C3 G3 D3 A3 E3 B3 F#3 C#3 Ab3 Eb3 Bb3 F3 C3 G3 F#3 C#3 Ab3 Eb3 Bb3 F3 C3 G3 D3 A3 E3 B3 F#3 C#3 Ab3 Eb3 F#M C#M AbM EbM BbM FM CM GM DM AM EM BM F#M C#M AbM EbM F#m C#m Abm Ebm Bbm Fm Cm Gm Dm Am Em Bm F#m C#m Abm Ebm F#7 C#7 Ab7 Eb7 Bb7 F7 C7 G7 D7 A7 E7 B7 F#7 C#7 Ab7 Eb7 F#dim C#dim Abdim Ebdim Bbdim Fdim Cdim Gdim Ddim Adim Edim Bdim F#dim C#dim Abdim Abdim Bass buttons Chord buttons* (*) This can be changed to 3 bass and 3 chord rows. See “Bass & Chord Mode” on p. 23. Here is what the caps look like: Slide up to remove Reference cap Slide over button The overall sound the Bass section produces is determined by the register you activated last. This section can be used as “accordion”, to play orchestral sounds, or both. (1) Connect the FR-2/FR-2b and switch it on. See page 10. (2) Grab the FR-2/FR-2b, press and pull down a register and start playing on the Bass (button) keyboard. When you only use the accordion sounds (i.e. while the [ORCH.BASS] B and [ORCH.CHORD] C buttons are dark), the bass and chord buttons use the same register, because they belong to the same accordion section. (3) If you think the sound is too loud or too soft, you can change the setting of the [VOLUME] knob A. Using the orchestral sounds Your FR-2/FR-2b contains PCM sounds (samples) of various instruments that are not related to accordion sounds. Those sounds allow you to expand your musical endeavours. The FR-2/FR-2b’s Orchestra functionality comprises three sections: one for the Treble keyboard (called “Orchestra”), another for the Bass buttons (first two rows, called “ORCH BASS”), and a third for the chord buttons (remaining rows, called “ORCH CHORD”). You can specify for each section whether or not the orchestral sounds should be used instead of the accordion sounds. Orchestral sounds for the Treble section Note: Only one orchestral sound can be selected at any one time. (1) Press one of the registers [6]~[8] once or twice (it lights red). The “b” sounds can be selected by pressing the corresponding register twice. See page 7 (or the front panel) for the available sounds. (2) Play a few notes on the Treble keyboard. ¦Switching off the Orchestra part To return to a state where only the Treble accordion sec tion sounds: (3) Press one of the registers [1]~[5] F once or twice (it lights green). Orchestral sounds for the Bass section The orchestral bass part can be used instead of the Bass section (thus replacing the accordion sound assigned to the bass rows). It only applies to the bass rows (the ones closest to the bellows) and has no effect on the chord buttons. (1) Press the [ORCH.BASS] B button (it must light). (2) Check whether the [LEFT.REGISTER] D button is dark. If it is not, press it. (3) Use the Bass registers to select the desired sound (the register you press lights green). ORCH BASS sounds 1 Acoustic 4 Fretless 2 Bowed* 5 Tuba Mix 3 Fingered 12 Orchestral sounds for the Chord section V-Accordion r Orchestral sounds for the Chord section V-Accordion r Note: The dynamics of sounds marked with an asterisk (*) can only be controlled by bellows movements. Those sounds are not velocity sensitive. ¦Switching off the Orchestra Bass part (4) Press the [ORCH.BASS] button again to return to normal Bass mode. Orchestral sounds for the Chord section The orchestral chord part can replace the accordion sound played by the chord rows of the button keyboard. It only applies to the chord rows and has no effect on the bass buttons. (1) Press the [ORCH.CHORD] C button (it lights). (2) Check whether the [LEFT.REGISTER] D button lights. If it doesn’t, press it. (3) Use the Bass registers to select the desired sound. ORCH CHORD sounds 1* St. Strings* 4* St. Orch Brass* 2* Chorus Organ* 5* Choir* 3 Steel Guitar Note: The dynamics of sounds marked with an asterisk (*) can only be controlled by bellows movements. Those sounds are not velocity sensitive. While ORCH CHORD mode is active, you can assign a different accordion register to the bass rows by pressing [LEFT.REGISTER] (it must be dark) and the desired Bass register. ¦Switching off the ORC...