Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Also, if the finish on your guitar is less than perfect, you may discover that the finish is also removed when you later remove the tape. The supplied adhesive tape is intended to be used only very temporarily, to help you determine the optimum position for the pickup. The Velcro fastener is meant for those who intend to frequently remove and reattach the GK-2A. • If there is no room for the Divided Pickup between the guitar's bridge pickup and the bridge itself, you would be better off modifying your guitar. (If possible, move a bridge pickup closer to the neck to make room for the Divided Pickup.) • Try placing the Divided Pickup and the Controller Unit on the guitar to see if they are compatible before actually attaching them. First use the double-sided tape to ensure that there is no problem with installation, then secure the Controller with the screw p rov i ded. 10 INSTALLATION Check that you have all of the supplied parts: Tapping Flat A13 x 16 mm x 1 (for installing the Contoroller) Tapping Pan A13 x 20 mm o x 2 (for installing the Divided Pickup) Spring x 2 (for installing the Divided Pickup) LP spacer x 6 (for installing the Contoroller) Double-sided tape A > x 3 (for installing the Contoroller) Double-sided tape B x4 (for installing the Divided Pickup) Velcro fastener x 1 (for adjusting the height of the Divided Pickup) Holder A Holder B Wing Nut E3V x 1 (for attaching the Holder B) Spring Washer © X 1 (for attaching the Holder B) Washer