Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
20, 2002 Status 2nd byte 3rd byte Version: 1.00 BnH 06H mmH BnH 26H llH Symbol Description Range mm, ll = the value of the parameter specified by RPN/NRPN n MIDI Channel 0H - FH (ch.1 - ch.16) mm = MSB, ll = LSB vv Control value 00H - 7FH (0 - 127) kk Note Number 00H - 7FH (0 - 127) QVolume (Controller number 7) xx ON/OFF 00H - 3FH (0 - 63: OFF), 40H - 7FH (64 - 127: ON) Status 2nd byte 3rd byte BnH 07H vvH 1. Data Reception * The Part Level parameter (PART MIXER) will change. (Sound Generator Section) ■Channel Voice Messages •Note off Status 2nd byte 3rd byte 8nH kkH vvH 9nH kkH 00H vv = note off velocity: 00H - 7FH (0 - 127) * Not received when the Tone Env Mode parameter (Patch/General, Rhythm/General) is NSUS. •Note on Status 2nd byte 9nH kkH vv = note on velocity: 01H - 7FH (1 - 127) 3rd byte vvH •Polyphonic Key Pressure Status 2nd byte 3rd byte AnH kkH vvH vv = Polyphonic Key Pressure: 00H - 7FH (0 - 127) •Control Change QBank Select (Controller number 0, 32) Status 2nd byte 3rd byte BnH 00H mmH BnH 20H llH mm, ll = Bank number: 00 00H - 7F 7FH (bank.1 - bank.16384) * Not received when the Receive Bank Select (System - MIDI Rx) is OFF. * The Patches, and Rhythms corresponding to each Bank Select are as follows. * The SRX series corresponding to each Bank Select are to see the SRX series owner’s manual. BANK SELECT 000 001 032 033 064 065 070 000 032 064 000 PROGRAM NUMBER 001 - 12 001 - 12 001 - 12 001 - 12 001 - 12 001 - 12 001 001 001 001 001 032 128 User Patch User Patch Card Patch Card Patch Preset Patch A Preset Patch B Preset Patch G User Rhythm Card Rhythm Preset Rhythm SRX Rhythm SRX Patch 001 - 128 129 - 256 001 - 128 129 - 256 001 - 128 001 - 128 001 001 001 001 001 032 128 QModulation (Controller number 1) Status 2nd byte 3rd byte BnH 01H vvH vv = Modulation depth: 00H - 7FH (0 - 127) QBreath type (Controller number 2) Status 2nd byte 3rd byte BnH 02H vvH QFoot type (Controller number 4) Status BnH 2nd byte 04H 3rd byte vvH QPortamento Time (Controller number 5) Status 2nd byte 3rd byte BnH 05H vvH QBalance (Controller number 8) Status 2nd byte 3rd byte BnH 08H vvH QPanpot (Controller number 10) Status 2nd byte 3rd byte BnH 0AH vvH vv = Panpot: 00H - 40H - 7FH (Left - Center - Right) * The Part Pan parameter (PART MIXER) will change. QExpression (Controller number 11) Status 2nd byte 3rd byte BnH 0BH vvH QHold 1 (Controller number 64) Status 2nd byte 3rd byte BnH 40H xxH QPortamento (Controller number 65) Status 2nd byte 3rd byte BnH 41H xxH QSostenuto (Controller number 66) Status 2nd byte 3rd byte BnH 42H xxH QSoft (Controller number 67) Status 2nd byte 3rd byte BnH 43H xxH QLegato Foot Switch (Controller number 68) Status 2nd byte 3rd byte BnH 44H xxH QHold 2 (Controller number 69) Status 2nd byte 3rd byte BnH 45H vvH * A hold movement isn’t done. QResonance (Controller number 71) Status 2nd byte 3rd byte BnH 47H vvH QRelease Time (Controller number 72) Status 2nd byte 3rd byte BnH 48H vvH QAttack time (Controller number 73) Status 2nd byte 3rd byte BnH 49H vvH QCutoff (Controller number 74) Status 2nd byte 3rd byte BnH 4AH vvH QDecay Time (Controller number 75) Status 2nd byte 3rd byte BnH 4BH vvH GROUP NUMBER MSB LSB - 072 - 072 1 MIDI Implementation QGeneral Purpose Controller 5 (Controller number 80) Status 2nd byte 3rd byte BnH 50H vvH QGeneral Purpose Controller 6 (Controller number 81) Status 2nd byte 3rd byte BnH 51H vvH QGeneral Purpose Controller 7 (Controller number 82) Status 2nd byte 3rd byte BnH 52H vvH QGeneral Purpose Controller 8 (Controller number 83) Status 2nd byte 3rd byte BnH 53H vvH QPortamento control (Controller number 84) Status 2nd byte 3rd byte BnH 54H kkH kk = source note number: 00H - 7FH (0 - 127) * A Note-on received immediately after a Portamento Control message will change continuously in pitch, starting from the pitch of the Source Note Number. * If a voice is already sounding for a note number identical to the Source Note Number, this voice will continue sounding (i.e., legato) and will, when the next Note-on is received, smoothly change to the pitch of that Note-on. * The rate of the pitch change caused by Portamento Control is determined by the Portamento Time value. QEffect 1 (Reverb Send Level) (Controller number 91) Status 2nd byte 3rd byte BnH 5BH vvH * The Part Reverb Level parameter (PART MIXER) will change. QRPN MSB/LSB (Controller number 100, 101) Status 2nd byte 3rd byte BnH 65H mmH BnH 64H llH mm = upper byte (MSB) of parameter number specified by RPN ll = lower byte (LSB) of parameter number specified by RPN <<< RPN >>> Control Changes include RPN (Registered Parameter Numbers), which are extended. When using RPNs, first RPN (Controller numbers 100 and 101; they can be sent in any order) should be sent in order to select the parameter, then Data Entry (Controller...