Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
15). 6. Pedal Switch Used for switching effects on/off, and for inputting the tempo. When the effect is on, be sure to start any changes with the filter at the lowest setting. * For inputting the tempo, refer to "Selling the Tempo with the PH- 3's Pedal Sivitch" (p. 13). 7. Thumbscrew When this screw is loosened, the pedal will open, allowing you to change the battery. * For the procedure, refer to "Changing the Battery" (p. 17). 8 9 10 11 | I CHECK 1 I ] I I O » STAGE RATE DEPTH RES pallTstcp oo< 9 • • • 4 MIN MAX MIN MAX MIN MAX SET TEMPO : PRESS & HOLD (>2 sec.} 8 Feature Names and Functions 2. CHECK Indicator Combination indicator that shows the effect's on/off status, tempo (in Tempo mode: p. 13), and Battery Check function. The indicator is lit when the effect is on, thereby allowing you to check whether the effect is on or off. * If the indicator dims when the effect is on or when the tempo is being displayed, il means that the kitten/ is running out of reseroe; when this occurs, replace with fresh batteries. For instructions on changing the batteries, refer to ''Changing the Battery" (p. 17). * The CHECK indicator shows whether the effect is being applied or not, and is used to indicate other effects. ¡1 does not indicate whether the. power to the device is on or not. 8. RATE Knob Adjusts the speed at which the filter changes. When set to MIN, the filter remains off. 9. DEPTH Knob Adjusts the depth of the filter change. The filter effect stops when this is set to MIN with the STAGE switch set to anything besides FALL or RISE. 10. RES (Resonance) Knob Adjusts the strength of the filter effect. The effect sound becomes stronger the further the knob is turned clockwise. * Raising the RES setting (turning it clockwise) makes it easier for the sound to become distorted. If it appears that the sound is becoming distorted, try lowering the RES setting. 3. OUTPUT Jack This output jack is connected to an amplifier or other effects device. 4. INPUT Jack This jack accepts input signals (coming from a guitar, some other musical instrument, or another effects unit). * When a batten/ is used, the INPUT jack also functions as a power switch. When a plug is inserted into the INPUT jack, the power -will be turned on. When the plug is pulled out, the power will be turned off. When you are not using the unit, pull the plug out of the INPUT jack. 7 Feature Names and Functions 11. STAGE Switch Selects the number of phase steps and the phase type. The higher the number, the more depth the phaser effect has. 4: 4-stage phaser; a light, vintage phaser effect with a classic feel. 8: 8-stage phaser that gives a balanced phaser sound. 10: 10-stage phaser providing a deep phaser effect. 12: 12-stage phaser, with two six- stage phasers connected in series for a powerful phaser effect. FALL: Phase effect featuring a continuously falling sensation. RISE: Phase effect that imparts a continuously rising sensation. STEP: Phase effect whereby filter modifications occur in a non-consecutive manner. This can provide some really unique, illusional effects. 9 Connections 10 Operation 2,4 2,5 2,6 CHECK | 0 5 RATE DEPTH RES tall I srrp MIN MAX MIN MAX MIN MAX SET TEMPO : PRESS & HOLD (>3 sec.) 1. When you have finished making the connections (p. 10), press the pedal switch to turn the effect on (the CHECK indicator is Lit). 2. Set the RATE, DEPTH, and RES knobs al the center position. 3. Use the STAGE switch to select the stage type. 4. With the RATE knob, adjust the speed of the filter change. * When set to MIN, the fitter remains off. 5. With the DEPTH knob, adjust the depth of the filter change. * l liL' filter effect stops when this is set to MIN with the STAGE switch set to (mi/thing besides FALL or RISE. 6. With the RES (Resonance) Knob, adjust the strength of the filter effect. * Raising the RES setting (turning it clockwise) makes it easier for the sound to become distorted. If it appears that the sound is becoming distorted, try lowering the RES setting. 12 Connections * Inserting a plug into the INPUT Jack will automatically switch the unit on. * To prevent malfunction ancl/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. * If there are batteries in the unit while an AC adaptor is being used, normal operation will continue should the line voltage be interrupted (power blackout or power cord disconnection). * Use only the specified expression pedal (Roland EV-5; sold separately). By connecting any other expression pedals, you risk causing malfunct ion and/or damage to the unit. * Once you've gotten hooked up correctly (p. 10), be sure to observe the following order when switching on the power to your equipment. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. When powering up: Turn on the power to your guita...