Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
91) • Make sure that a function is assigned to the VK-7's CONTROL PEDAL1 /2 jack. (VK-7 Owner's Manual, p. 92) • Use a stereo cable (phone-phone) when connecting the EXPRESSION OUT jack to the VK-7's EXP PEDAL jack, or the EXP PEDAL OUT jack to the VK-7's CONTROL PEDAL1 /2 jack. • Cannot assign a function to the foot switch. ♦ When the PK-25 is connected to the VK-7 without using analog cables, functions other than Rotary Slow/Fast (foot pedal L) and Rotary Brake (foot pedal R) cannot be assigned. • MIDI channel can't be changed. ♦ The MIDI transmission channel is fixed at channel 2.(p. 8) 9 Specifications Pedalboard:25 keys •Control: Expression Pedal Foot Switch-L/R Damper (Hold) Switch Power Switch •Connectors: PK OUT Jack MIDI OUT Connectors HOLD OUT Jack EXPRESSION OUT Jack FOOTSW-R OUT Jgck FOOT SW-L OUT Jack •Power: DC 9 V: AC Adaptor, or Supplied from VK-77 via dedicated cable •Current Draw: 200 mA (DC 9 V) •Dimensions: 1068 (W) x 887 (D) x 275 (H) mm 42-1/16 (W) x 34-15/16 (D) x 10-7/8 (H) inches •Weight: 29.1 kg / 64 lbs 3 oz •Accessories: Owner's Manual AC Adaptor PK connector's cable •Options: Organ Bench: BNC-25 * In the interest of product improvement, the specifications and /or appearance of this unit are subject to change without prior notice. 10 Implementation Model: PK-25 (MIDI rud.it Keyboard) Dote: Fob. 1, 2000 Version: 1.00 1. Transmitted Data ■Channel Voice Messages •Note off Status 2nd hyle 3rd hytc 81H UN 40H kk = note number: 24H - 3CH (3o - 60) •Note on Status 2nd byte 3rd byte «1H kkH 78H kk - note number: 24H - 3CH (36 - (SO) •Control Change ^Expression (Controller number 11) SUlUiS 2nd byli; 3rd.byU‘ BIH 0BH wH vv = expression: 00H - 7i:H (0 -127) ' If the EXPRESSION OUT jack on the rear panel is in use, this unit doesn't send Expression message via MIDI. ^General Purpose Controller 3 (Controller number 18) Stains 2nd byte 3rd byte BIH 12H wH vv -- control value: 00M, 7Fl I (0, 127) * This message will be sent by operating a loot switch locating left side of the expression pedal. ‘ If a TOOT SIV-L OUT jack on the rear panel is in use. Ihe unit doesn't send this message via MIDI. DGeneral Purpose Controller 4 (Controller number 19) Status 2nd byte 3rd byte BIH 13H wH vv = control value: (HUH, 7FH (0,127) * This message will be sent bv operating a foot switch locating right side of the expression pedal. * If a FOOT SVV-R OUT jack on the rear panel is in use, the unit doesn't send this message via MIDI. OHold 1 (Controller number 64) Slants 2nd byte 3rd byte BIH 40H wH vv = control value: 00H, 7FH (P. 127) If ¿1 HOLD Ol 'T jack on the rear panel is in use, Ihe unit doesn't send Hold 1 message via MIDI. ■System Realtime Message •Active sensing Status FEH * This will be transmitted constantly at intervals of approximately 250 ms. ■System Exclusive Messages "Data Set 1 (DTI)" to control VK-7 is the only System Exclusive messages transmitted by PK-25. •Data Set1 DT1 Status Data byte Status F0H 41H, lOH.OOH, 08H, 12H, aaH, F7H bbH, ccH, ddH, eeH, sum Byte Remarks F0H Exclusive status 41H ID number (Roland) I0H device ID 00H model ID 08H model ID (VK-7) 12)1 command ID (DTI) aa! I address MSB: The most significant bvte of Ihe address bbH address ccH address ddH address LSB The least significant byte of Ihe address eeH data: The actual dala to be transmitted, sum checksum F7H EOX (End Of Exclusive) " This unit sends Ihe following messages lo control ROTARY SOUND of the VK-7. Refer to MIDI Implementation pages in the VK-7 Owner's Manual. F0 41 10 no as } 2 02 00 10 3D ... F7 (Rotarv Speed: Transmil bv FOOTSW-l.) F0 41 10 00 OS 12 02 00 10 3F ... F7 (Rotary Rotation: Transmit by FOOT SVV-R) 11 MIDI FOOTPEDAL Model PK-25 MIDI Implementation Chart Date : Feb. 1, 2000 Version : 1.00 Function... Transmitted Recognized Remarks Basic Channel Default Changed 2 X X X Mode Default Messages Altered Mode 3 X **************** X X Note Number : True Voice 36-60 **************** X X Velocity Note ON Note OFF 0 (9n, v=120) 0 (8n, v=64) X X After Touch Key’s Ch’s X X X X Pitch Bend X X 11 18 19 64 О О О О X X X X Expression General Purpose 3 General Purpose 4 Hoid 1 Control Change Prog Change : True # X X X System Exclusive О *1 X System Common SongPos SongSel Tune X X X X X X System Real Time Clock Commands X X X X Aux Message All Sound OFF Reset All Controllers Local ON/OFF All Notes OFF Active Sensing Reset X X X X О X X X X X X X Notes *1 For controlling Rotary Sound of the VK-7 Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO О : Yes X : No Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. (AFRICA) EGYPT A1 Fanny Trading Office P.O. Box 2W4, FI Horrieh Heliopolos, Cairo, EGYPT TEL: (02) 4185531 REUN...