Votos - 2, Puntuación media: 5
(
)
)
|
Fotos y especificaciones Roland RG-7 |
Resumen del manual
The customer should not attempt to assemble the instrument. Roland cannot warrant the safety of the assemble operation, if this operation is carried out by the customer. The assemble operation may cause serious personal injury and serious damage to the properties. How to Assemble the RG-7 ■ Check the Parts © ® ✓ © © Before you begin assembling the stand, check that all the following parts were supplied. ® Legs 3 ® Screws (M8 x 30) 4 © Lyre assembly 1 © Screws (M4 x 16) 5 © Lyre support sticks 2 © Screw (4 x 10) 3 ® Caster Cups 3 ® Hex wrench (Large) 1 © Hex socket head cap bolts (W 1/2) 6 © Cord Cramp (Small) 4 Plain washers 6 © Cord Cramp (Large) 4 ■ Assemble Procedure Attach the legs to the piano 1. Position the legs ® in place beneath the piano. 2. Use the hex wrench © to fasten the leg ® to the piano (at two points) with the bolts @. 3. Fasten the two other legs ® to the piano in the same fashion. Attach the lyre assembly 4. Using the screws ®, fasten the lyre assembly ® to the piano (at four points). 5. Using the screws ©, fasten the lyre support sticks © to the lyre box (at two points). 6. Using the screws ®, fasten the lyre support sticks © to the piano (at two points). 7. Place the caster cups © beneath the casters of the legs. Connecting the Pedal Cord and the Power Cord The customer can also connect the pedal cord and the power cord. 1. Connect the supplied power ...