Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
When this mode is selected, the VS-2480/2480CD will function as a 16-track recorder (tracks 1–16). When sampling frequency is more than 64kHz, the VS-2480/2480CD will function as a 8-track recorder. • MTP (Multi Track Pro) Audio from the analog inputs that passes through the VS-2480/2480CD’s 24-bit A/D converter, and audio data from the 24-bit digital inputs will be recorded and played using proprietary Roland coding technology (R-DAC). Normally you should select this mode. • CDR (CD-R Writing): This mode allows you to directly create a CD image file on your hard disk – this file can later be burned onto a CD-R. Recording and playback will occur using 16-bit linear data similar to that of a CD player or DAT recorder. In CDR mode, Tracks 1–8 are linked in odd/even fader pairs, with their levels controlled by the odd-numbered fader. Track 17–24 cannot be used. • M16 (Mastering 16bit): Recording and playback will occur using 16-bit linear data similar to that of a CD player or DAT recorder. When this mode is selected, the VS-2480/2480CD will function as a 16-track recorder (tracks 1–16). When sampling frequency is more than 64kHz, the VS-2480/2480CD will function as a 8-track recorder. • MT1 (Multi Track 1): This recording mode provides approximately twice the recording time of M16 mode. • MT2 (Multi Track 2): This recording mode provides even longer record times than MT1. • LIV (Live 1): This mode is appropriate when your hard disk lacks free space or when recording live performances where the total recording time is unknown. • LV2 (Live 2): This mode provides the longest recording time. This mode is appropriate for live recordings of speeches, and recordings made for reference purposes. Use this mode if you have very little drive space left or you aren’t sure how long the recording will be. Q: Is it possible to mix down even when all the 24 tracks are occupied? A: Yes. In the Mastering Room, you can mix down to the empty V-tracks on tracks 23/24 while playing back 24 tracks. VS-2480/2480CD Q&A Q: How long is the recording time? A: Recording time in each recording mode and sampling rate is as shown in the following table. (unit: minute) 96kHz 88.2kHz 64kHz M24 662 721 993 MTP 1,989 2,165 2,983 CDR 994 1,082 1,491 M16 994 1,082 1,491 MT1 1,989 2,165 2,983 MT2 2,651 2,885 3,976 LIV 3,181 3,462 4,772 LV2 3,977 4,329 5,966 48kHz 44.1kHz 32kHz M24 1,324 1,442 1,987 MTP 3,977 4,329 5,966 CDR 1,989 2,165 2,983 M16 1,989 2,165 2,983 MT1 3,977 4,329 5,966 MT2 5,302 5,771 7,953 LIV 6,362 6,925 9,543 LV2 7,955 8,658 11,932 Q: How many tracks can I record/play back simultaneously? A: Maximum simultaneous recording/playback tracks in each recording mode and sampling rate are as shown in the following table. Q: Is “Track Copy” possible between the different projects? A: Yes. You can import the tracks from a Project which is in the same recording mode and sampling rate. Q: Is it possible to record the fader location? Is it possible to record the SENS knob value? A: You can memorize the fader location in the scene memory up to 100 patterns per Project. But you cannot memorize the values for SENS, PHONES 1/2 and MONITOR knobs. Q: Is it possible to monitor any one of the bus sources via headphones? A: Yes. You can assign any different bus signal to each of two headphone jacks. Q: How many locators can I recall at once? A: One at once, but you can memorize 100 locators (10 points x 10 banks) per Project. Q: Is it possible to undo/redo automix? A: Yes. One level undo/redo is possible for automix writing/editing on VS-2480/2480CD. Q: Is it possible to record the effect parameters in the automix? A: No. It is impossible. Q: Is it possible to use VS-2480 simply as an audio mixer? A: Yes. But 3.5” hard disk should be installed. Q: Is there any limitation on the length of the phrase assigned to the phrase pad? A: On VS-2480/2480CD, maximum length of every phrase is limited within 24 hours. These phrases recorded and edited are assigned to the phrase pads, so the maximum length of the phrases on the phrase pads are accordingly within 24 hours. VS-2480/2480CD Q&A EFFECTS Q: Are the effects pre-installed? Is it possible to use the effect board from the previous VS-series? A: VS-2480/2480CD is shipped with one VS8F-2 effect expansion board installed, and you can start working with two stereo effects. Plus you can add three more optional VS8F-2 for eight stereo effects in total. VS8F-1 is exclusively for VS-880 and cannot be used with any other VS models. Q: Which microphones can be used for mic modeling? A: Roland dynamic microphone DR-20, and AKG C3000B condenser microphones can be used. Q: Are 31-band graphic equalizer and realtime spectrum analyzer available as I see on VM-7000 digital mixer? A: When the sampling rate is 48/44.1/32kHz, spectrum analyzer can be used. Also generator for white noise, pink noise and sine wave can be used simultaneously. 31-band graphic equalizer is not equipped on VS-2480/2480CD. Q: Is it possible to assi...