Votos - 3, Puntuación media: 3.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Device ID This should be set to “17.” MIDI Thru (MIDI Thru Switch) = OUT For this application, set this to “OUT.” SysEx.Tx (System Exclusive Transmit Switch) For this application, set this to “On.” MMC (Midi Machine Control Mode) For this application, set this to “MASTER.” Control Type (Mixer Control Types) For this application, set this to “Off.” * When “C.C.” or “Excl” is selected, mixer adjustments made on the master VS will result in the same mixer settings occurring on the slave VS. For more detailed information about System Exclusive messages, refer to “MIDI Implementation” (Appendices, p. 25) 4. Hold [SHIFT] and press [EXT SYNC]. 5. Use [ ], [ ], [ ], and [ ] to move the cursor and use the TIME/VALUE dial to make the settings as described below. Sync Source For this application, set this to “INT.” Sync Gen. (Generator) For this application, set this to “MTC.” Sync MTC Type (MTC Type) For this application, set this to “30.” 6. Press [PLAY (DISPLAY)] to return to the Playlist display. Chapter 22 Specific Applications Settings for the Slave VS 1. Hold [SHIFT] and press [F5 (SYSTEM)]. The System Menu appears in the display. If the System Menu does not appear, press [F6 (EXIT)]. 2. Press [F4 (MIDI)]. If “MIDI” does not appear above [F4], press [PAGE] until “MIDI” appears, then press [F4 (MIDI)]. 3. Use [ ], [ ], [ ], and [ ] to move the cursor and use the TIME/VALUE dial to make settings for each parameter as described below. Device ID This should be set to “17.” SysEx.Rx (System Exclusive Receive Switch) For this application, set this to “On.” MMC (Midi Machine Control Mode) For this application, set this to “SLAVE.” Control Type (Mixer Control Types) For this application, leave this “Off.” 4. Hold [SHIFT] and press [EXT SYNC] button, located above the TIME/VALUE dial. 5. Use [ ], [ ], [ ], and [ ] to move the cursor and use the TIME/VALUE dial to make the settings as described below. Sync Error Level Normally, this is set to “5.” Sync MTC Type (MTC Type) For this application, set this to “30.” 6. Press [PLAY (DISPLAY)] to return to the Playlist display. 7. Press [EXT SYNC]. The button indicator blinks, indicating the VS is ready to receive MTC. In this state, the slave VS operates in sync with the master VS. The EXT SYNC indicator is lit when the slave VS is waiting for MTC. You can also use this method to transfer digital audio between two VS recorders. Connect the DIGITAL OUT of the master VS to the DIGITAL IN of the slave VS—since the MTC generated by the master VS provides synchronization to both VS recorders, its digital ouput must also supply digital clock to the slave VS. Syncing a VS-1680 and a VS-880/880EX This section explains how to synchronize a VS-1680 and a VS-880/880EX. The VS-1680 functions as the MMC/MTC master, and the VS-880/880EX functions as the MMC/MTC slave. The example explains the procedure for synchronizing a VS-1680 with a VS-880/880EX using MIDI Time Code. Make connections as described below. Syncing the VS-880 to the VS-1680 Using MTC and MMC Both the VS-1680 and the VS-880/880EX have the ability to generate and slave to MIDI Time Code (MTC). They also have the ability to varispeed their sample rate to account for fluctuations in the source signal. This provides a sync that is frame-accurate and allows you to do things such as lock to video and locate on the fly. MMC allows you to control the transport of the slave VS from the master. The following example explains how to synchronize the VS-880/880EX as a slave device to the VS-1680 using MTC and MMC. Setup The only items needed to synchronize the VS-1680 and VS 880/880EX are a MIDI cable and a pair of audio cables. Use the following procedure to setup a VS-1680 and VS-880/880EX to operate in sync with the VS-1680 as the master device: 1. Connect the MIDI OUT jack of the VS-1680 to the MIDI IN jack of the VS-880/880EX. 2. Connect the left MASTER OUT jack of the VS-880/880EX to INPUT 3 on the VS-1680. 3. Connect the right MASTER OUT jack of the VS-880/ 880EX to INPUT 4 on the VS-1680. VS-1680 Settings 1. Hold [SHIFT] and press [F5 (SYSTEM)]. The System Menu appears in the display. If the System Menu does not appear, press [F6 (EXIT)]. 2. Press [F4 (MIDI)]. If “MIDI” does not appear above [F4], press [PAGE] until “MIDI” appears, then press [F4 (MIDI)]. 3. Use [ ], [ ], [ ], and [ ] to move the cursor and use the TIME/VALUE dial to make settings for each parameter as described below. Chapter 255 Chapter 22 Specific Applications Device ID For this application, set this to “17.” MIDI Thru (MIDI Thru Switch) For this application, set this to “OUT.” SysEx.Tx (System Exclusive Transmit Switch) For this application, set this to “On.” MMC (Midi Machine Control Mode) For this application, set this to “MASTER.” Control Type (Mixer Control Types) For this application, set this to “Off.” 4. Hold [SHIFT] and press [EXT SYNC]. 5. Use [ ], [ ], [ ], and [ ] to move the cursor and use the TIME/VALUE dial to make the settings as described belo...