Votos - 3, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
. When transporting the instrument, make sure that the mouthpiece cap is attached. 15 Nomenclature qqMouthpiece wLigature eBarrel rUpper Joint tKey yMain Body uLower Joint iBell oRegister Key !0Neck !1Upper Neck !2Lower Neck !3Fastening Screw !4Peg oAccessories . Mouthpiece Cap . Cork Grease . Polishing Cloth * Improvements may change the design and specifications without notice. qqwwweqwerttyuiiruruttii!0!2!4!1!3Eb Clarinet Bb/A Clarinet Alto Clarinet Bass Clarinet Reverse Side 16 Assembly Before assembling the instrument, please observe the following. The clarinet is made of natural wood and precision metal parts. When holding and assembling the instrument, take care not to place any excessive force on the keys. Also, if you have difficulty attaching the joints together when assembling the instrument, apply a thin coat of cork grease to the joint cork and try to put the joints together again. When applying cork grease, be careful not to apply too much. If the joints still do not go together smoothly, apply a thin coat of cork grease to the receiver side as well. ¦ Assembly Bb/A Clarinet 1. Attach the barrel to the upper joint and the bell to the lower joint. 2. To link the upper and lower joint bridge keys together, hold the upper joint in your left hand as shown in the illustration and press the upper keys to raise the bridge key. 3. Hold the lower joint in your right hand and check the position of the bridge key. Slide the lower joint onto the upper joint by rotating the lower joint. * Make sure the upper and lower bridge keys do not come into contact with each other. 4. After connecting the upper and lower joints together, attach the mouthpiece. Eb Clarinet 1. Attach the barrel and bell to the main body. 2. Attach the mouthpiece to the barrel. bridge key Assembl y Alto Clarinet / Bass Clarinet Caution When Assembling As bridge keys protrude from the neck, upper joint, lower joint, and bell on the alto and bass clarinets, be careful not to damage or bend these parts when assem- bling the instrument. The bell section and tone hole on the alto clarinet is thin so please use extra caution when assembling these parts. Bell bridge key 1. Attaching the bell to the lower joint. Holding the bottom of the bell in your right hand, slide the bell section partially onto the joint. 2. Hold down the pad plate on the bell with your right thumb then slide the bell all the way onto the joint. When assembling the bass clarinet, insert the peg at this point to provide stability when standing the instrument on the floor. 3. Assemble the upper and lower joints. While checking the position of the bridge keys, align the upper and lower bridge keys and slide the upper and lower joints together without twisting. * Make sure the upper and lower bridge keys do not come into contact with each other. 4. Attach the neck to the upper joint. . On the alto clarinet After attaching the mouthpiece to the neck, insert the neck into the upper joint. . On the bass clarinet Attach...
Otros modelos de este manual:Instrumentos Musicales - YCL-681II (1.53 mb)
Instrumentos Musicales - YCL-881 (1.53 mb)
Instrumentos Musicales - YCL-250 (1.53 mb)
Instrumentos Musicales - YCL-255 (1.53 mb)