Votos - 2, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Tuning slide 28 Caring for the Instrument . Cleaning the mouthpiece Dip the mouthpiece brush in a brass soap water solution and use the brush to clean the mouthpiece’s throat. Rinse the mouthpiece thoroughly with clean water. Mouthpiece brush Always place the instrument in its case when you are finished playing. Also, keep the instrument in its case during breaks. 29 Troubleshooting Tone is not clear and pitch is poor. • A large amount of dirt has accumulated inside the pipe. . Wash out the pipes. • There is a large dent in the pipe and air is leaking from a pipe seam. • The mouthpiece is loose and air is leaking from around the mouthpiece. • The holes in the rotary valve and valve casing are not aligned. . Contact the dealer from whom you purchased the instrument. The slide does not move smoothly. • Dirt has accumulated between the inner and outer slides. . Wash the inside of the slide. • The slide is bent. • There is a dent in the slide. . Never use the instrument with a damaged slide. Contact the dealer from whom you purchased the instrument. The tuning slide is stuck can not be removed. The slide is sluggish. • Dirt or dust between the tuning slide and pipe has scratched the tuning slide. . Thoroughly remove dirt and apply some slide grease that matches the type of slide. • Dropping or hitting the slide has caused a dent, or the slide was bent while cleaning. . Contact the dealer from whom you purchased the instrument. The screw is too tight and cannot be removed. • The screw is corroded. • Hitting the instrument has damaged the screw. . Contact the dealer from whom you purchased the instrument. The rotary valve is sluggish. • Dirt has accumulated between the rotary valve and valve casing. • The rotary valve lever linkage is bent. . Contact the dealer from whom you purchased the instrument. • The string is loose. . Re-attach the string. The mouthpiece cannot be removed. • The instrument was dropped or hit with the mouthpiece attached. Or, the mouthpiece was inserted with too much force. • The instrument has been left for a long period of time with the mouthpiece inserted in the instrument. . Contact the dealer from whom you purchased the instrument. The instrument makes an abnormal sound when played. • Solder on the instrument has come loose, or a foreign object is in the pipe. . Contact the dealer from whom you purchased the instrument. The rotary valve lever makes a metallic sound when moved. • The lever comes into contact with the pipes. . Re-attach the string and adjust the lever’s position. • Screws are loose. . Firmly tighten the screws. • The rotary valve and valve casing have come loose. . Contact the dealer from whom you purchased the instrument. 114 ............ /Position Chart/Positionstabelle/Tableau des positions/ L6 L4 7 L2 6 L1 4 4 2 2 7 L2 6 L1 4 4 2 2 1 L5 L3 5 5 3 3 5 5 3 3 1 L3 1 ¦.................... / Tenor Trombone / Tenorposaune / Trombone tenor / Trombon tenor / ...../ Теноровый тромбон / ............ 2 3 4 5 6 7 . ......
Otros modelos de este manual:Instrumentos Musicales - YSL-871 (5.58 mb)
Instrumentos Musicales - YSL-872 (5.58 mb)
Instrumentos Musicales - YSL-350C (5.58 mb)
Instrumentos Musicales - YSL-354 (5.58 mb)